Allegheny Technologies Inc., Pittsburgh, has acquired Dynamic Flowform Corp., Billerica, Mass., which fabricates thin-walled tubular components in net or near-net shapes by a precision flowforming process.
Continue reading
IBC Advanced Alloys Corp., Vancouver, has signed a non-binding memorandum of understanding with Nu-Cast Inc., Londonderry, N.H., to collaborate on new beryllium-aluminum investment casting projects and opportunities, initially for the aerospace sector.
Continue reading
Aleris, Cleveland, Ohio, has signed a definitive agreement to acquire Nichols Aluminum, LLC, a wholly owned subsidiary of Quanex Building Products Corp.
Continue reading
Oerlikon, Switzerland, has signed an agreement to acquire Sulzer Metco, a division of Sulzer, also of Switzerland, for approximately $1.1 billion.
Continue reading
EOS collaborated with Airbus Group Innovations to complete an environmental lifecycle comparison of two key production technologies, rapid investment casting and DMLS.
Continue reading
RTI International Metals Inc., Pittsburgh, has acquired Directed Manufacturing Inc., Austin, Texas, a leader in additive manufacturing of metals and plastics for both commercial production and engineering development applications.
Continue reading
MTS Systems Corp., Eden Prairie, Minn., has sold an extensive array of state-of-the-art mechanical testing systems to Wichita State University’s National Institute for Aviation Research (NIAR).
Continue reading
ThyssenKrupp Aerospace will continue Alimex’s business of distributing and processing aluminum mill products (rod, sheet, plate) for the aviation industry.
Continue reading
Uddeholm AB, Sweden, introduces Uddeholm SuperClean Concept powder metallurgy (PM) tool steels, building on the proven success of its current PM tool steel grades.
Continue readingLiquidmetal Technologies Inc., Rancho Santa Margarita, Calif., delivered missile canards that are being fitted for a future test of Lockheed Martin’s (Bethesda, Md.) EAPS (Extended Area Protection and Survivability) missile.
Continue reading
SAKOR Technologies Inc., Okemos, Mich., announces the availability of its complete AccuDyne AC Dynamometer system for wind power testing applications. The system can be used by multiple engineering groups to test and verify designs, as well as for quality control testing after manufacturing.
Continue reading
Researchers at the University of Rostock, Germany, have developed a new way to produce high strength metallic alloys at a lower cost and with less energy. Led by Dr. Eberhard Burkel, Professor of Physics, researchers demonstrated that rapidly cooling a material directly after spark plasma sintering (SPS) fabrication can enhance hardness, strength, and ductility. The new rapid cooling SPS system is based on a commercially available design, modified to include a series of gas inlet nozzles.
Continue reading
Ipsen USA, Cherry Valley, Ill., announces a new case study detailing the Titan’s adaptive, multipurpose processing capabilities. Its versatility lies in its ability to run a variety of workloads through many different heat treatment processes back-to-back, while maintaining energy and cost efficiency. The paper emphasizes how varied and ever-changing customer needs can be, and how Titan’s features and options can improve job turnaround.
Continue readingThe Duval family established an educational fund with the ASM Materials Education Foundation in honor of Mr. Jean Duval’s accomplishments during his long, productive, and innovative career as chairman and CEO of Aubert & Duval (Paris, France). The Jean Duval Educational Fund is designated for educational activities to encourage young people to enroll in materials science or other STEM professions for their lifelong career.
Continue reading
The Metal Powder Industries Federation (MPIF), Princeton, N.J., announces the inaugural conference on Additive Manufacturing with Powder Metallurgy (AMPM), May 18-20, 2014, at the Walt Disney World Dolphin Hotel, Orlando, Florida. This specialized conference will be co-located with the PM2014 World Congress on Powder Metallurgy & Particulate Materials and the Tungsten, Refractory & Hardmaterials Conference, which will all be taking place under one roof in Orlando.
Continue readingHydraulic press is energy efficient and accurate A new 3500 ton molding machine will allow EVCO Plastics, Deforest, Wis., a leading custom plastics manufacturer, to provide customers with increased efficiency to further advance its large-part production capabilities and provide greater cost savings. The new 3500 ton Engel press is up and running at EVCO’s Oshkosh, Wis., plant, with production orders in the queue.
Continue reading
Ipsen USA, Cherry Valley, Ill., has been selected by ExOne, North Huntingdon, Pa., to provide vacuum furnaces for additive manufacturing production. ExOne is a global provider of three-dimensional printing machines and printed products. Its goal is to simplify the purchasing process for 3D printers by offering a complete printer-furnace package.
Continue readingAir Products, Lehigh Valley, Pa., has acquired EPCO Carbon Dioxide Products Inc., a privately-held producer and marketer of liquid carbon dioxide headquartered in Monroe, Louisiana. The acquisition also includes Louisiana Leasing, Ltd. of Illinois, an affiliated company that owns liquid CO2 distribution assets that are solely leased to EPCO.
Continue reading
With over 140 million consumers, and almost unlimited infrastructure needs, Russia remains one of the most promising markets for U.S. exporters. Within the last few months, Ipsen, Cherry Valley, Ill., has shipped eight TITAN furnaces to Russia for the civil aerospace and land-based turbine engine industries. These shipments were spread throughout Russia to cities including, but not limited to, Ufa, Perm, and Voronezh.
Continue reading
Century Aluminum Co., Chicago Ill., announces that its wholly owned subsidiary has completed the transaction with Rio Tinto Alcan Inc. to acquire substantially all of the assets of the Sebree aluminum smelter. The Sebree smelter, located in Henderson County, Kentucky, has an annual production capacity of 205,000 metric tons of primary aluminum. Century Aluminum Company owns primary aluminum capacity in the United States and Iceland.
Continue readingResearchers from North Carolina State University, Raleigh, developed 3D printing technology and techniques to create free-standing structures made of liquid metal at room temperature. “It’s difficult to create structures out of liquids, because liquids want to bead up. But we’ve found that a liquid metal alloy of gallium and indium reacts to the oxygen in the air at room temperature to form a ‘skin’ that allows the liquid metal structures to retain their shapes,” says Dr.
Continue reading
On June 13, Zeiss, Oberkochen, Germany, announced the planned acquisition of the U.S.-based Xradia, Inc., Pleasanton, Calif. Xradia is a medium-size company providing innovative 3D x-ray microscopes for industrial and academic research applications. The closing of the transaction is subject to the fulfillment of customary closing conditions including a required filing with the U.S. competition authorities. After closing, Xradia, Inc.
Continue reading
University of Birmingham, School of Metallurgy and Materials, UK, announces that researchers have developed analytical models for the repair of commercial single crystal nickel-base superalloys. Composite element test (CET) modeling was used by researchers to define processing parameters and the correlation between solidification conditions and microstructure. Models are designed to predict the relationship of laser treatment and powder injection and their effects on the substrate.
Continue reading
Wisconsin Oven Corp., East Troy, Wis., has opened another plant in Waukesh, Wis. The 30,000-square-foot existing facility will increase the capacity of the industrial oven manufacturer’s existing four plants in East Troy. The expansion will help Wisconsin Oven continue to design and manufacture a broad line of heating equipment . The company’s standard or custom industrial ovens are used for a multitude of applications, such as heat treating.
Continue readingIn 1969, ASM established the honor of Fellow of the Society to provide recognition to members for their distinguished contributions to materials science and engineering and to develop a broad based forum of technical and professional leaders to serve as advisors to the Society. We are pleased to announce EDFAS member and Past President, Dr. Edward I. Cole, Senior Scientist, Sandia National Laboratories, Albuquerque, NM, will be among the 2013 inductees.
Continue readingAssembly of the backbone of NASA’s James Webb Space Telescope, the primary mirror backplane support structure, is a step closer to completion with the recent addition of the backplane support frame, a fixture that will be used to connect all the pieces of the telescope together. The backplane support frame brings together Webb’s center section and wings, secondary mirror support structure, aft optics system, and integrated science instrument module.
Continue reading
Alfe Heat Treating, Fort Wayne, Ind., sponsor of the University of Texas Austin’s Solar Power Team, helped design and build the TexSun, a vehicle with an aluminum sub-frame and chassis. The 35-pound design is much lighter than the previous model’s 80-pound steel sub-frame and chassis. “The aluminum chassis was great because it is so much lighter,” said Alfe Vice President Dan Andersen.
Continue reading
The world’s first low cost Atomic Force Microscope (AFM) has been developed in Beijing by a group of PhD students from University College London (UCL), Tsinghua University and Peking University – using LEGO.
Continue reading
Seco/Warwick Corp., Meadville, Pa., has received an order for a CaseMaster Evolution vacuum carburizing furnace line that includes a washer/tempering unit, loaders, and line control system with single load tracking. The system is dedicated to the treatment of automotive steering system components. The contract was signed in August 2013 with ThyssenKrupp Presta de Mexico S.A. de CV, and the turnkey production cell will be delivered in the second quarter of 2014.
Continue readingWomen now make up nearly half the workforce, yet only 23% of workers in STEM-related jobs are women. A way to combat this trend is to find support from peers in a formalized way.
Continue reading
