Bodycote appointments Group Chief Executive

Bodycote, Macclesfield, U.K, announced the appointment of Jim Fairbairn as the new Group Chief Executive, succeeding Stephen Harris upon his retirement. Fairbairn is set to join the company and its Board in March 2024 and will assume the role of Group Chief Executive in May 2024, following a structured transition period. Stephen Harris will retire and step down from the Board at the Annual General Meeting on May 31, 2024.

Jim Fairbairn, 54, brings a wealth of experience in managing engineering businesses. His career, spanning over thirty years, includes significant roles at John Wood Group, PE-owned Clyde Bergemann, Howden Group, and Megger Group, culminating in substantial experience as both a Divisional and Group CEO.

Fairbairn’s most recent position was Group CEO at Megger Group, a test and measurement specialist based in Dover, which he joined in 2017. Under his leadership, the company saw significant revenue growth to £325m and a notable increase in operating margins. He also played a pivotal role in evolving Megger’s strategy and culture. Before Megger, he held executive roles at Howden Group in Glasgow from 2009 to 2017, ending his tenure there as President of the Howden Power, Environment and Process business, overseeing global product and service revenues exceeding $1 billion across 19 sites worldwide.

Read further here.

One Minute Mentor: Continuous Operating Furnaces for Tool Steel Strips

The continuous heat treatment of tool steel is applied to low- or medium-alloyed carbon steel strips as well as martensitic stainless steels. The described lines produce high-quality strip with respect to uniform structure, flatness, and bright surface finish. Steel grades with 0.4 to 1.2% C, low and high alloyed, can be processed. 

Strip dimensions range between 10 to 750 mm (0.4 to 29.5 in.) wide and 0.05 to 4 mm (0.002 to 0.16 in.) thick. High quenching rates are necessary, especially for plain carbon steels. Cooling gradients of up to 600 K/s are possible in a molten lead-bismuth quench. Because two-stage quenching technology provides considerable advantages over quenching in oil, this method has been adopted worldwide. It is also possible to achieve isothermal transformation to bainite and pearlite using a molten metal quench, so this type of hardening and tempering line is extremely versatile.

For more information, click on the link below (subscription required). Then scroll to Figure 9. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005958

Wisconsin Oven ships two horizontal quench systems to the semiconductor industry

Wisconsin Oven, East Troy, WI, announced the shipment of two Electrically Heated Horizontal Quench Systems to the semiconductor industry. These systems are designed for the annealing and rapid cooling of various high purity alloy parts.

The operation of each horizontal quench system begins with loading the product onto a work grid located on the loading platform. After the load is lifted into position, a pusher/extractor mechanism at the front of the quench tank moves the load onto the quench lift platform. Then, the furnace pusher/extractor mechanism transfers the load into the furnace for annealing. Once the heating cycle is complete, the vertical lift door opens, and the furnace pusher/extractor moves the load back onto the quench lift platform, lowering it into the water quench tank for cooling. After adequate cooling, the quench lift raises the load, and the front-mounted pusher/extractor mechanism returns it to the scissor lift, where a blow-off system removes most of the water from the load. A video demonstrating this system’s operation is available through a provided link.

Each horizontal quench furnace can reach a maximum temperature of 1,250°F and has the capacity to heat and support a 4,500-pound gross load. These furnaces are designed to achieve a temperature uniformity of +/-10°F. The customer requested a uniformity tolerance of ±20°F at 500°F, 900°F, and 1200°F, which was documented for each system through a nine-point profile test conducted in an empty oven chamber under static conditions.

Read further here.

Ipsen completes ISO/IEC 17025:2017 accreditation for pyrometry services

Ipsen, Cherry Valley, IL, has successfully achieved ISO/IEC 17025:2017 accreditation for calibrations, enhancing its pyrometry services. This accreditation is particularly significant for customers operating under the National Aerospace and Defense Contractors Accreditation Program (NADCAP) and Aerospace Material Specifications (AMS) 2750G.

A key update in AMS2750G, revised in 2022, mandates that calibration service providers must hold ISO/IEC 17025:2017 accreditation. This requirement encompasses temperature controller calibration, system accuracy testing (SAT), and temperature uniformity surveys (TUS).

Cavan Cardenas, Ipsen’s calibration and pyrometry coordinator, emphasized the importance of this certification: “Obtaining this lab certification reassures our customers of our capability to accurately conduct these tests. It’s crucial for us to verify the precision of our calibration equipment to provide superior support to our clients.”

Ipsen has appointed a dedicated technician for its Calibrations Lab, located at the Vacuum Technology Excellence Center in Cherry Valley, IL. This addition strengthens the company’s commitment to providing advanced calibration solutions.

Read further here.

Solar Atmospheres South Carolina facility orders 10 bar vacuum furnace

Solar Atmospheres, Greenville, SC, has announced the acquisition of a new 10-bar vacuum furnace for its Greenville, SC facility. Manufactured by Solar Manufacturing, this new horizontal vacuum furnace measures 48 inches wide, 48 inches high, and 96 inches deep. It is designed to handle loads up to 12,000 pounds and is scheduled for installation in late 2024.

The furnace will be equipped with a vacuum pumping system capable of achieving an ultimate vacuum of 1×10-6 Torr, essential for processing titanium and other high-grade alloys. It also features advanced designs for the uniform and rapid cooling of large workloads, enhancing the processing capabilities at the Greenville facility.

Steve Prout, president of Solar Atmospheres Southeast, said, “This new furnace will provide an additional option for high-pressure quenching of large components and workloads in the region. It also offers an opportunity for cost-effective thermal processing in the current economic environment.”

https://solaratm.com/solar-atmospheres-south-carolina-facility-orders-10-bar-vacuum-furnace/