Bodycote joins energy industries council to expand engagement with global energy sector

Bodycote, Macclesfield, UK, announced its membership with the Energy Industries Council (EIC), a leading global trade association for the energy sector. This move strengthens Bodycote’s strategic alignment with the evolving needs of the industry and reinforces its role as a provider of heat treatment and specialist thermal processing services across power generation and energy infrastructure markets.

Through its membership, Bodycote gains broader access to key industry stakeholders, enabling stronger supply chain collaboration and the pursuit of new business opportunities within the energy sector. The company serves a wide range of EIC members, fostering synergies that support innovation and operational excellence.

Bodycote’s engagement with the EIC supports its commitment to sustainability, particularly in nuclear and renewable energy markets. The partnership enhances customer access to Bodycote’s services via EIC platforms and events, further promoting solutions that improve performance, efficiency, and reliability in critical energy applications.

Read more

One Minute Mentor: Phase Transformations using finite-element-method (FEM) model.

Heat treatment of tool steels means several phase transformations. Every phase transformation must be described by start amount, end amount, and kinetics (change of phases depending on temperature and time). Start and end amount can be calculated with different thermodynamic software. For example, Thermocalc is well validated for tool steels. All of the aforementioned data are used as input data for a finite-element-method (FEM) model. In any case the first step of simulation models is validation, which means the comparison of experiments and mathematical simulation. The better the input data and the better the model formulation, the better are the results and the fewer loops have to be made for an appropriate model (reference model). This reference model is then used for process optimization. All these steps of model development are illustrated in the figure. 

For more information, click on the link below (subscription required). Then scroll to Figure 15. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

 

Wisconsin Oven ships composite curing oven to Defense Industry

Wisconsin Oven, East Troy, WI, has announced the shipment of a gas-fired walk-in batch oven to a prominent manufacturer in the defense industry. The oven is designed for curing filament wound composite materials and is capable of processing a 78,000-pound load on a 40-foot long mandrel carried by a load car.

The work chamber measures 10 feet wide, 42 feet long, and 9 feet high, with a qualified work zone of 8 feet by 40 feet by 8 feet. The oven includes a rotation system to prevent drooping of uncured composites during the heating process, offering speed control flexibility through a variable frequency drive.

This oven operates at a maximum temperature of 500°F, with temperature uniformity of ±10°F at multiple setpoints. Equipped with a PLC-based Wisconsin Oven Premium Control System and an IoT system, it allows for real-time monitoring, predictive maintenance, and remote fault diagnosis.

Additional features include split-line construction for easier shipping, two powerful recirculation blowers, interior lighting, and safety-compliant railings and ladder access.

Read further here.

Dr. Kathy Hayrynen awarded the 2023 Fred Linebarger teaching award

Dr. Kathy Hayrynen, FASM, vice president of research and development, Aalberts Surface Technologies, Cleveland, has been awarded the 2023 Fred Linebarger Teaching Award by the Cast Iron Division of the American Foundry Society Technical Council.

The award was established in 2015 and honors the late Dr. Fred Linebarger (Director of Technology for Miller & CO) who devoted his career to the development of treatment alloys and processes for the production of both ductile and compacted graphite iron.

Dr. Fred was known for his teaching skills, namely an ability to take complex concepts and break them down into simple bites that anyone could understand. He served as a mentor to many technical employees in the metalcasting industry.

The award honors Dr. Kathy’s efforts mentoring and sharing her knowledge. It emphasizes her role in and the importance of education in the metalcasting industry. It also recognizes her willingness to share knowledge with others by teaching fundamentals of metalcasting to students, customers and industry peers. She serves as a mentor to the next generation of metalcasting professionals, especially women in the industry.

Read further here.

Wisconsin oven ships pin conveyor oven to automotive manufacturer

Wisconsin Oven Corp., East Troy, has shipped one electrically heated conveyor oven to an automotive manufacturer, which will be used for tempering automotive parts. The conveyor oven features a chain style conveyor system with vertical pins, ensuring the uniform transfer of parts through the heating and cooldown zones of the oven. The maximum temperature rating of the conveyor oven is 260° C, with interior chamber dimensions of 3’6” W x 20’10” L x 9” H.

The conveyor oven also features a top-down bottom-up airflow configuration designed with a 55,000 CFM @ 50 HP blower, ensuring optimal temperature uniformity of ±2.5° C at 163°C, documented with a temperature uniformity test. The oven is equipped with a continuous chain conveyor with vertical pins, programmable temperature controller, and recorder with Ethernet capabilities.

The unique features of this tempering oven include the ability to automatically scan the parts while being loaded onto the conveyor and validate that the correct part is being loaded, providing a pass/fail regarding heating time and temperature. The conveyor oven also includes an ambient cooldown zone and supervised installation with start-up and training.

Mike Grande, vice president of sales,said that, “Our continuous designs provide customers with innovative solutions to meet their load and process requirements. This conveyor oven was designed with high-velocity impingement air nozzles for rapid, uniform heating and optimal part results.” The equipment was fully factory tested and adjusted prior to shipment from the facility, ensuring it met all Wisconsin Oven quality standards. The equipment comes with a 2-year warranty, providing peace of mind for the automotive manufacturer.

Read further here.

GKN relies on ALD technology for e-mobility

ALD Vacuum Technologies, Hanau, Germany, has delivered two low-pressure carburizing plants to GKN Driveline Bruneck AG as part of the latter’s effort to modernize their hardening shop for the development and production of e-powertrains.

Continue reading