SECO/WARWICK USA delivers second vacuum tempering furnace to aerospace manufacturer

SECO/WARWICK USA, Meadville, Pa., announced that a leading international aircraft motion-control manufacturer has placed a repeat order for an identical low-temperature vacuum tempering furnace, following the success of the first unit installed at the customer’s facility. The new furnace is designed for tempering, ageing, and other sub-critical heat-treat processes, with a maximum operating temperature of 1380°F, a 24-by-24-by-36-in. work zone, and a load capacity of 1750 pounds. It meets AMS2750F Class 2 temperature uniformity requirements (±10°F) and supports nitrogen convection heating and cooling, with final cooling handled by an internal recirculation blower and a water-cooled heat exchanger. The repeat unit adds to the customer’s existing SECO/WARWICK installed base, which includes multi-chamber CaseMaster Evolution furnaces in double- and triple-chamber configurations and a Vector single-chamber high-pressure gas-quench vacuum furnace deployed across multiple sites. “This customer’s continued investment in SECO/WARWICK equipment reflects their trust in the quality and reliability required for aerospace applications,” said Piotr Zawistowski, managing director of SECO/WARWICK USA. “Their repeat business underscores the strength of our technology and our long-term customer relationships.” SECO/WARWICK Group is a global manufacturer of vacuum and atmosphere heat-treatment equipment, with headquarters in Świebodzin, Poland, and US operations based in Meadville, Pennsylvania, serving aerospace, automotive, medical, energy, and tool steel markets.

Read further here

Gasbarre and SOLO Swiss Announce Exclusive Licensing Agreement for North America

Gasbarre Thermal Processing Systems, DuBois, Pennsylvania, and SOLO Swiss SA, Porrentruy, Switzerland, announced an exclusive licensing agreement granting Gasbarre the rights to promote, sell, and manufacture the SOLO ProfiTherm heat treating system in North America. The agreement was announced on January 21, 2026.

The ProfiTherm system features a modular arrangement of bell furnaces and quench tanks with direct, rapid transfer from furnace to quench. The design is positioned as a practical alternative to traditional integral quench batch furnaces, offering a more compact footprint that simplifies installation and reduces plant disruption.

ProfiTherm supports a range of heat treating processes including austempering, marquenching, carburizing, carbonitriding, and neutral hardening. Target applications include captive heat treat departments and commercial shops serving general industry, aerospace, defense, and bearing markets.

The partnership expands Gasbarre’s equipment portfolio and gives North American heat treaters access to SOLO Swiss bell furnace technology that has been widely adopted in Europe.

Read further here

One Minute Mentor : Phase Transformations in Numerical Simulation

Heat treatment of tool steels means several phase transformations. Every phase transformation must be described by start amount, end amount, and kinetics (change of phases depending on temperature and time). Start and end amount can be calculated with different thermodynamic software. For example, Thermocalc is well validated for tool steels. The most common method for determining the transformation kinetics of main phases (e.g. ferrite, austenite, martensite, bainite) is to use dilatometric investigations. TTT (time-temperature-transformation) diagrams obtained from dilatometer measurements can be easily implemented in HTS software. An example is shown in the figure. 

For more information, click on the link below (subscription required). Then scroll to Figure 14. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

One Minute Mentor: Distortion of Corrosion-Resistant Plastic Mold Steels

Corrosion-resistant plastic mold steels are usually tempered at lower tempering temperatures than hot-work, high-alloyed cold-work, or high-speed steels. A comparison of different types of corrosion-resistant plastic mold steels with the widely used cold-work tool steel D2 with the same dimensions as in the previous example for cold-work tool steels for such heat treatment conditions can be seen in the figure and shows that all steels show a similar low dimension change in width. Regarding the thickness of the plates there is a significantly higher increase for the ledeburitic cold-work tool steel. Vacuum heat treatment with high-pressure gas quenching leads to a similar amount of distortion as salt bath heat treatments but again shows significant scatter.

For more information, click on the link below (subscription required). Then scroll to Figure 13. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Constellium honored with supplier of the year award from stellantis for csr excellence

Constellium, Paris, announced that it has been awarded the Supplier of the Year Award by Stellantis, recognizing the company’s strong commitment to corporate social responsibility (CSR). This honor reflects Constellium’s dedication to high CSR standards in both its operations and supply chain, which has earned positive ratings from several international rating agencies. A long-standing supplier for Stellantis brands, Constellium provides aluminum body sheet products and extrusion-based structural solutions for various vehicle platforms across Europe and the U.S.

Constellium’s approach to sustainability has been acknowledged by independent organizations, including EcoVadis, the Carbon Disclosure Project (CDP), MSCI ESG Ratings, and ISS-Oekom. As a founding member of the Aluminium Stewardship Initiative (ASI), Constellium recently achieved ASI Performance Standard Certification for all global operations.

Ingrid Joerg, executive vice president and chief operating officer at Constellium, expressed pride in the award from Stellantis, noting that it underscores the company’s dedication to responsible purchasing and sustainable solutions. The award was presented at Stellantis’s annual event in Turin, Italy, where Maxime Picat, stellantis chief purchasing and supply chain officer, emphasized the critical role of suppliers in supporting Stellantis’s growth through their commitment to quality and collaboration. Constellium, dedicated to delivering sustainable aluminum products, publishes annual sustainability reports to highlight its progress and results in this area

Read further here.

Ipsen USA launches service HUB Model for improved customer support

Ipsen USA, Cherry Valley, Illinois, announced the launch of its new Service HUB model, aimed at enhancing customer support across the United States. The HUB system, developed over the past two years under the leadership of Ipsen Global CEO Geoffrey Somary and currently overseen by Chief Service Officer John Dykstra, is now fully operational across the Midwest and Southeastern regions.

The HUBs are designed to offer quicker response times, with dedicated teams that provide tailored service for customers in close geographic proximity. This model allows Ipsen to optimize service efficiency, reducing downtime for heat-treating operations and improving customer experience.

In addition to benefiting customers, the HUB model also enhances the work-life balance of Ipsen’s Field Service Engineers (FSEs) by reducing travel time. The initiative is led by Lu Chouraki, Manager of Business Development, who emphasized the goal of minimizing response times and improving support for customers facing operational outages.

This strategic shift reflects Ipsen’s commitment to service excellence, offering personalized, regional expertise that both empowers its team and delivers enhanced support to customers.

Read further here. 

Nitrex celebrates 40 Years of innovation in heat treatment solutions

Nitrex, Quebec, announced that it is celebrating its 40th anniversary this year, marking four decades of growth and innovation in the heat treatment industry. Founded in 1984, Nitrex has evolved from a pioneer in controlled nitriding to a global leader offering end-to-end heat treatment solutions. The company’s technological advancements have expanded its capabilities to encompass metallurgy, engineering, process optimization, and automation.

Since 2019, under the current leadership, Nitrex has broadened its portfolio to include advanced vacuum furnaces and introduced technology for improved brake rotor performance. The company has also launched digital platforms such as QMULUS, aimed at optimizing customer processes and boosting operational efficiency.

In addition to its own milestone, Nitrex is celebrating the 50th anniversary of its UPC-Marathon office in Germany, recognizing the long-standing contributions and achievements of its global team. These anniversaries reflect Nitrex’s ongoing commitment to innovation and excellence.

Read further here.

Wisconsin Oven ships small batch oven to Canadian manufacturer

Wisconsin Oven, East Troy, WI, announced the international shipment of an electrically heated small batch oven to a Canadian manufacturer of automotive components. The oven, designed for curing parts, has a maximum temperature rating of 650°F and chamber dimensions of 4’ W x 4’ L x 4’ H. Prior to shipment, the oven’s temperature uniformity of ± 10°F was verified through a nine-point profile test conducted in an empty chamber under static conditions.

The unit features patented high-efficiency panel seams for improved insulation, a 4” thick insulated floor, and two carbon steel shelves for part loading, each rated for 5 pounds per square foot. It utilizes combination airflow for optimal heating rates and uniformity, with temperature controlled by a Watlow F4T digital controller, featuring a touch screen, PID control, and Ethernet communication.

The oven also includes a process timer with an audible alarm, ensuring consistent curing and part quality.

Read further here.

Ipsen announces launch of field service engineer academy

Ipsen, Cherry Valley, IL, has announced the launch of its Field Service Engineer (FSE) Academy, a 20-week training program aimed at strengthening the Ipsen Customer Service (ICS) Team. The program includes both classroom instruction at the company’s TDC facility in Cherry Valley, Illinois, and hands-on field training with veteran technicians. While primarily designed for new hires, experienced engineers can also participate, with regional service managers directing them to specific modules based on their skill level assessments.

The academy will focus on the fundamentals of vacuum furnace repair, giving technicians a comprehensive understanding of Ipsen’s equipment and customer applications. Technical Training Lead Cavan Cardenas noted, “From day one, we want our technicians to grasp how our products work and their purpose in the field.”

In addition to technical training, the program will develop soft skills and address the demands of a service-driven role, preparing recruits for a dynamic, on-the-road service environment.

Read further here.

One Minute Mentor: Distortion in Tool Steels

Some of the main interactions  that occur during the heat treatment of steel alloys including temperature, microstructure, and stress/strain. Especially for tool steels these interactions are mainly influenced by the carbon content in the steel matrix, the types and relative amounts of the alloying elements, and the carbide formation/transformation/precipitation characteristics of the alloy system.

Heat treatment involves changes of temperature with time, which determine changes in microstructure. The rate of temperature change results in a change of microstructure which is described by phase transformation kinetics, as in e.g. TTT (time-temperature-transformation) diagrams; every phase transformation releases/absorbs latent heat, which influences the temperature field. An inhomogeneous temperature distribution, i.e. temperature gradients, within the tool during heat treatment can generate thermal stresses that lead to plastic deformation, if the yield strength of the material at that temperature is exceeded. Every mechanical deformation generates heat which, in turn, influences the temperature field. Furthermore, there is an interaction between the stress state and the microstructure. Phase transformations can result in micro-plastic deformation, which can be globally described using transformation plasticity models.

For more information, click on the link below (subscription required). Then scroll to Figure 2. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980