Nextracker and JM Steel expand Pennsylvania facility to boost U.S. solar energy supply chain

Nextracker, Philadelphia, PA, has announced a major expansion at their Leetsdale, Pennsylvania steel facility, in collaboration with JENNMAR subsidiary JM Steel. This expansion has successfully tripled the factory’s capacity to support the growing demand for solar energy in Pennsylvania and the broader mid-Atlantic region.

The Leetsdale facility, originally built during World War II to produce materials for tank landing ships, has been transformed into a state-of-the-art manufacturing hub for critical steel components needed for solar projects. With the completion of the latest enhancements, the facility now boasts a production capacity of 4 GW, significantly bolstering the U.S. supply chain for renewable energy.

The expansion not only increases the facility’s output but also underscores JENNMAR’s commitment to the solar energy sector, with investments surpassing $100 million over the past four years. Tony Calandra, CEO of JENNMAR, highlighted the historic nature of the site and its significance to the community, “We are proud to announce the expansion of this historic steel factory in Pittsburgh—which we have been honored to call our home for more than 100 years. This partnership with Nextracker allows for significant investment in advanced manufacturing and brings high-quality jobs back to our communities.”

The project has created 60 new manufacturing jobs and is a key component of Nextracker’s strategy to enhance its U.S. manufacturing footprint, which has seen the company add 20 new or expanded U.S. manufacturing facilities since 2021. The expanded capacity allows Nextracker to supply over 25 GW of U.S. solar tracker capacity annually.

The expansion represents a strategic step towards securing a robust U.S. supply chain in solar energy, critical to meeting the energy demands of the future and enhancing the economic and environmental health of the region.

Read further here. 

Can-Eng commissions mesh belt furnace overseas

Can-Eng Furnaces, Niagara, Ontario,  has commissioned a continuous mesh belt heat-treat system for the production of high-quality automotive fasteners in Italy.

This project in the Piedmont region of Italy was one of four installation locations for this globally recognized producer of specialty automotive fasteners that span from Europe, South America, Mexico, and the United States of America.

Can-Eng Furnaces International Ltd was chosen to supply its state-of-the-art systems based on proven reliability, efficiency, and soft-part-handling features — hallmarks of Can-Eng’s mesh belt furnace systems. The new, high-volume fastener system features energy efficient combustion and waste heat recovery systems, atmosphere-controlled mesh belt hardening system, oil quench, post wash system, temper furnace, soluble oil system, bi-directional conveyor discharge, and Can-Eng’s Level 2 SCADA system. Can-Eng’s PET™ system provides the user with access to vital Industry 4.0 data which includes product traceability, detailed process data for continuous process improvements, comprehensive equipment diagnostics, cost analysis, and inventory management.

https://thermalprocessing.com/news/can-eng-commissions-mesh-belt-furnace-overseas/

Lindberg/MPH completes roller hearth furnace system for the energy industry

Lindberg/MPH, Mich., announced the installation of a roller hearth furnace system for a manufacturer of products used in the energy industry. The heat treat system is comprised of two box furnaces with quench tanks, a dual directional load transfer car, four companion draw batch ovens, and two stationary load/unload tables.

The maximum operating temperature of the box furnaces is 1850°F and they are designed for nitrogen-based atmosphere applications. The load space dimensions of the box furnaces are 48” W x 96” D x 36” H, and the internal chambers are larger to provide clearance for baskets or fixtures. A snake chain pusher assembly is used by each furnace to transfer the loads from the chamber to the quench elevator deck.

Read further here.

Wisconsin Oven to ship three custom conveyor ovens to the molded-fiber industry

Wisconsin Oven, East Troy, is scheduled to ship three custom dryers to a manufacturer in the molded-fiber industry. The ovens will be used for drying thick-walled paper pulp molded fiber packaging material used in a variety of products. Molded fiber packaging is made of 100% recycled materials, making them an environmentally friendly solution for companies looking to use sustainable packaging and reduce their environmental impact.

These paper pulp drying conveyor ovens are designed with four temperature zones, and each has the sufficient capability to remove 850 pounds of water per hour from the molded pulp. The ovens feature a maximum temperature rating of 500°. The work chamber dimensions are 8’ W x 120’ L x 1’ H. A total of twelve personnel access doors with explosion relief latches are located on the sides of each unit. Each unit also has stainless steel sheet metal and structure on the wet end to reduce corrosion.

The conveyor ovens are designed with top-down and bottom-up airflow to maximize the drying rate of the paper pulp shapes. The flat wire belt continuous conveyor system uses a variable frequency drive that is adjustable from 0-3 FPM. Emergency stop buttons are located at the load and unload sections of each oven for operator safety.

Read further here. 

Three from Aalberts Surface Technologies included in this years 40 under 40

Aalberts Technologies, Livonia, announced today that Angella Sell, Connor Montgomery, and Chris Pietszak are members of Heat Treat Today’s 40 Under 40 Class of 2023. The Heat Treat Today 40 Under 40 award recognizes rising leaders in the heat treat community who are giving their time, talent, and education to make the industry a great place to work.

Angella Sell, Research & Development Engineer, is a proven leader, having chaired the ASM Detroit Chapter from June 2020 to June 2021. In 2022 Angella received the ASM Detroit Chapter President’s Award for her leadership role during the challenging pandemic years. Angella is the vice-chair of the AFS Cast Iron Research Committee and will assume the role of chair in May 2024. 

Connor Montgomery, Oshkosh Plant Manager, is focused on hiring and retention practices as well on effective communications. Connor is leading major efforts to improve flow, efficiency, and throughput in the Oshkosh plant. He has introduced the use of modern lean tools such as 5S, FIFO, and Supermarkets to reduce unproductive manhours. He is actively involved in the reduction of additional waste within plant processing. 

Chris Pietszak, Quality Manager, is focsed on the implementation of and support of ISO, IATF, and Nadcap as well as CQI-9 compliance. He is a trained ISO and IATF auditor and an MTI YES Program graduate. Chris played an important role implementing the quality systems during the start-up of the Fort Smith facility. 

Read further here

One Minute Mentor: Fluidized Bed

A fluid bed results when a gas is passed upward through a bed of small solid particles at a rate fast enough to lift these particles and to create turbulence. This motion of particles, which are usually made of aluminum oxide or silica oxide, is similar to that of a fluid, which can be seen schematically in the figure.

When gas is forced upward through small holes in a supporting plate, two forces meet to raise the particles: the buoyancy of the gas and the retarding force known as aerodynamic drag. Objects to be heat treated are immersed directly into the bed of particles.

For more information, click on the link below (subscription required). Then scroll to Figure 7.

R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Constellium’s operations in Muscle Shoals and Bowling Green certified by the Aluminium Stewardship Initiative (ASI)

Constellium, Pairs, announced that it has received the Aluminium Stewardship Initiative (ASI) Performance Standard certificate for its facilities in Muscle Shoals, Alabama, and Bowling Green, Kentucky. This certification, verified by an independent third-party audit, means that the plants operate according to a strict set of governance, environmental, and social standards, including greenhouse gas emissions, biodiversity and labor rights.

The Constellium Muscle Shoals plant is a major aluminium cansheet supplier for the packaging market with over 450,000 metric tons of finished aluminium coils per year. The facility also produces aluminium automotive coils, which are processed at the Bowling Green plant. Muscle Shoals’ world-class recycling center is able to recycle the equivalent of 20 billion aluminium cans per year. Constellium’s Bowling Green plant produces flat rolled aluminium Auto Body Sheet products for the automotive market, with a capacity to produce 100,000 metric tons annually.

Read further here.

Processing of nano-reinforced aluminum hybrid metal matrix composites and the effect of post-heat treatment: a review

A review from the School of Engineering and Technology, India, describes the increasing demand for cutting-edge materials with a high strength-to-weight ratio and economic considerations. Lightweight materials such as aluminum (Al) and its alloys are attractive, but some properties such as low thermal stability and high wear rate limit the application of aluminum alloys (AA) to some extent. Many researchers have developed various composites to get around these restrictions and increase the performance of aluminum and its alloy. Metal matrix composites (MMCs) with nanoparticles have revealed greater mechanical and tribological properties compared with micron-sized reinforcements. This review summarizes the latest developments in this field.

Read further here. 

 

Seco/Warwick furnace to process Jet Engine components

Seco/Warwick, Meadville, PA, has developed a system to perform clean brazing processes in high vacuum as efficiently as possible, ensuring the highest protection of the treated part surfaces. The solution will be used to process jet engine components.

The German Partner carries out comprehensive repairs of technologically advanced jet engines. The company also has a research center which develops innovative repair techniques for various types of components and entire engines. The group employs several thousand qualified employees in various locations around the world and is a leader among companies repairing and providing full service MRO for jet engines. The purchase of a vertical vacuum furnace will improve production processes and significantly increase the commercial heat treater’s efficiency.

Read further here.

Solar Atmospheres adds Boeing approval

Solar Atmospheres, Souderton, PA, has announced the addition of Boeing BAC-5613 approval for the processing of titanium for Boeing aircraft. With this approval, all five Solar Atmospheres facilities are approved to process Boeing end-use titanium components requiring vacuum heat treatment.

Mike Moyer, vice president of sales for Solar Atmospheres of Eastern Pa facility said that “We are proud to announce this addition to our scope of approvals for Boeing. Solar has unique expertise and capabilities in the realm of processing titanium, and we are happy to gain Boeing’s confidence in that regard. This new approval opens the door for Solar Atmospheres to better serve Boeing’s suppliers in the Mid-Atlantic region of the US, as well as provide overflow capacity for other Solar facilities nationwide.”

Read further here.