Constellium announces significant weight savings in EV Battery enclosures through ALIVE project

Constellium, based in Paris, announced that its collaborative research project, Aluminium Intensive Vehicle Enclosures (ALIVE), has achieved weight savings of 12 to 35 percent for electric vehicle (EV) battery enclosures. The project, led by Constellium’s University Technology Center at Brunel University London, focused on optimizing the design and manufacturing processes for structural aluminum enclosures in EVs.

Launched in 2020, the £15 million initiative was partially funded by the UK government through the Advanced Propulsion Centre (APC). The project involved six industrial partners, including BMW, Volvo, and Innoval Technology, along with university technology partners from Brunel University London and the University of Warwick.

The ALIVE team developed new aluminum designs using Constellium’s high-strength alloys, HSA6® and HCA6®, while implementing advanced joining and forming technologies. Full-scale prototypes were produced and successfully passed rigorous testing for performance, safety, and fire resistance. The project also generated cost models to support future industrialization of the designs.

Read further here. 

Constellium Ravenswood to receive $75 million for zero carbon technology

Constellium, Ravenswood, WV, announced that it has been selected by the U.S. Department of Energy (DOE) Office of Clean Energy Demonstrations to begin award negotiations for up to $75 million in Bipartisan Infrastructure Law and Inflation Reduction Act funding as part of the Industrial Demonstrations Program (IDP). This investment will help fund the implementation of breakthrough low-to-no emissions technologies in Constellium’s Ravenswood facility, supporting the decarbonization of the casthouses, the plant’s most energy intensive operation.
This investment will support the installation of low-emissions SmartMelt furnaces that can operate using a range of fuels, including clean hydrogen, paving the way towards a zero carbon casthouse. In addition to reducing carbon emissions, the project is expected to help maximize recycled scrap intake, and to improve worker safety with the introduction of a hands-free casting process.
The project will also contribute to the local communities around Ravenswood with a dedicated budget to build a new training and wellness center for all employees and an onsite childcare, and to provide financial and technical resources for local schools and universities.
Constellium Ravenswood will now enter negotiations on the specific terms of the investment, including operational milestones, and timing of access to funds throughout the life of the project, estimated to be approximately five years. The final details of the project investment are subject to these negotiations.

https://www.constellium.com/news/constellium-ravenswood-selected-by-us-doe-to-receive-usd75million-investment

One Minute Mentor: Plasma Nitriding Equipment

Cold-walled (double-walled water-cooled) systems were the first generation of plasma nitriding furnaces. This technology is also a vacuum-based process but employs the principle of glow discharge to provide energy for heating and nitriding at one time. Therefore, the independent control of the temperature stability and the nitriding intensity is not possible because both processes are using the same energy source—the plasma.

The hot-wall plasma nitriding furnaces, the next generation of cold-wall ion nitriding systems, are mainly used and built now. This system ensures optimal nitriding quality by fulfilling the highest demands on temperature and nitriding process control. The big advantage of this technology is the separation of the control of the heating and the plasma nitriding parameters. 

For more information, click on the link below (subscription required). Then scroll to Figure 26

R Schneider; R. Mesquita; H. Altena; T. Müller; P. Seemann, Processes and Furnace Equipment for Heat Treating of Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Seco/Warwick delivers Vector vacuum furnace to revolver manufacturer

Seco/Warwick, Meadville, Pa.,  received another order for the supply of a Vector vacuum furnace to a South American international manufacturer of weapons and military equipment. The furnace will process various components including barrels, reels, locks, and firearm magazines, which are expected to be reliable, of the highest quality, and perform with outstanding resistance to negative external conditions.

This will be the second solution of this type in the South American defense industry leader’s internal hardening plant. It is a single-chamber gas-cooled vacuum furnace which can be used for a variety of metal heat treatment processes and applications. This solution has been adapted to the customer’s requirements so that it is as effective as possible at delivering the precision heat treatment results required for quality weaponry.

Thanks to the large working space (900x900x1200 mm), the Vector system is designed to process quite large elements. A characteristic feature of the design is convection heating, which improves heat transfer efficiency when heating at lower temperatures, and directional cooling, which enables differentiated cooling of problematic parts in terms of shapes.

Read further here

Nitrex installs nitriding system at Akademi Metalurji

Nitrex Vacuum, Quebec, has installed a turnkey nitriding system at Akademi Metalurji, a full-service commercial heat-treating solutions provider located in Turkey. The project includes a mid-sized pit-type furnace, advanced controls, three process technologies along with accelerated cooling. 

The decision to invest in a new nitriding system was driven by the company’s objective to overcome efficiency and quality challenges faced with their previous furnace at the Gebze facility. The prior system consumed excessive amounts of process gases and yielded inconsistent nitriding results. With the addition of a Nitrex NX-1015 pit furnace, Akademi Metalurji can now save on process gases and production time, while also expanding their heat treatment capabilities to accommodate wider-dimensioned parts. The nitriding furnace offers an effective work zone of 39” diameter by 59” high (1000 x 1500 mm) and can handle a load of up to 4400 lbs. (2000 kg). The supplied library of Nitreg-based recipes is tailored to meet different application requirements, resulting in a hardened surface that is highly wear-resistant. For applications like machinery components, tooling, dies, and molds, where Akademi Metalurji specializes, Nitreg delivers improved tooling performance, ensuring longer service life and higher throughput. Ultimately, this leads to tool cost savings for their customers.

The system was successfully installed at the Gebze facility, located southeast of Istanbul, and commenced operations in April 2023. Since then, it has been running smoothly, delivering excellent results.

Read further here.

Quintus Technologies supplies high pressure Flexform press to airframe manufacturer

Quintus Technologies, Vasteras, Sweden, announced that they will supply a high pressure fluid cell press to France’s LAUAK Group, a Tier 1 supplier to the aerospace industry. The press will be installed at the LAUAK Aerostructures factory in Grandola, Portugal, in September 2023. 

Reaffirming its continued commitment to productivity enhancement, LAUAK selected the Quintus model QFC 0.7×1.8-800 press with high pressure technology to bolster its manufacturing efficiency. “The forming press is undoubtedly at the heart of sheet metal production,” says Mikel Charritton, LAUAK Group Managing Director. “Especially in the context of the current aerospace ramp-up, in particular the A320, A350, and B737 programs, LAUAK’s capital equipment investments are strongly influenced by the imperatives of competitiveness. This press significantly increases and secures our production capacity.” Quintus’s proprietary hydroforming process requires only one rigid tool half, an innovation that not only generates significant tool cost savings but also eliminates several forming operations, intermediate heat treatments, and operator dependencies. 

Read further here.

Constellium joins EPA’s Energy Star program as an industrial partner

Constellium, Paris,  announced that they are participating in the U.S. Environmental Protection Agency (EPA) Energy Star program as an Industrial Partner.

The Energy Star program is a voluntary initiative that helps businesses protect the environment by promoting energy-efficient products, homes, buildings and manufacturing plants, as well as save on energy costs. As an Industrial Partner, Constellium will work closely with the EPA to identify and implement energy-saving strategies and technologies across its manufacturing operations in the United States.

Constellium has already taken significant steps to reduce its energy consumption and greenhouse gas emissions. The company has set a target to reduce its greenhouse gas emissions by 30% by 2030 vs 2021, and reports its results annually in its sustainability report. 

https://www.constellium.com/news/constellium-joins-epas-energy-star-r-program-as-an-industrial-partner

Constellium to provide closed-loop recycling for the all-new Megane E-TECH Electric

Constellium, Paris,  announced today its agreement with Renault Group to establish a closed-loop recycling process for the all-new Megane E-TECH Electric. 

Aluminum, lightweight and fully recyclable, is the material of choice for the electrification of the automotive fleet, and Constellium is well-positioned to support this transition with advanced products and solutions.

Renault Group has developed a closed-loop recycling process to bring manufacturing scrap from the stamping process directly back to Constellium, resulting in a reduced CO2 footprint. Based on best practices to avoid mixing 5xxx and 6xxx alloys and to compact scrap for optimal logistics at Renault Group, the closed-loop process will recycle these alloys, so that they can be reused in Renault Group’s production without any loss of properties, and overall with no downcycling.

Constellium, a full-service supplier of rolled and extruded aluminum solutions for the global automotive market, supplies aluminum for 1 in 4 vehicles produced in Europe and the U.S. We help automakers produce lighter, safer and more fuel-efficient vehicles, as well as electric vehicles with greater range. Renault Group is supplied by Constellium’s ASI-certified facility in Neuf Brisach, France.

Read further here.