Lindberg/MPH ships mesh belt conveyor furnace for use with powdered metal

Lindberg/MPH, Mich., has announced the shipment of an electrically heated, full muffle, mesh belt conveyor furnace. This furnace is designed for treating pressed powdered material.

The furnace is designed for applications with a maximum process temperature of 1000° C (1832° F) that utilize a nitrogen or clean dry filtered air process atmosphere. The unit is configured with 9 temperature control zones and includes a water-cooling section. The conveyor system features a 14 inch wide mesh belt with belt stop alarm to provide an audible and visual indication in case of a conveyor stoppage.

There are purge chambers at the entrance and exit of this conveyor furnace. In these chambers purge gas flows from perforated plenum chambers above and below the belt and exhaust stacks with adjustable butterfly valves are located at the inner ends of each chamber. Load and unload tables at the entrance and exit of the conveyor provide ease of product transfer for the operator.

The furnace zone temperatures are controlled by Eurotherm controllers. These controllers have advanced PID control with variable overshoot inhibition. A hi-limit Eurotherm controller guards against over temperature conditions in each zone of temperature control.  A visual and audible alert and removal of power to the heating element occur in the event the monitor temperature exceeds a desired set point. 

Read further here.

One Minute Mentor: Salt Bath Nitrocarburizing

Salt bath nitrocarburizing is usually performed at temperatures between 560 and 580 °C (1040 to 1075 °F) in cyanate- and carbonate-containing salts with traces of cyanides and furnaces similar to those used for the nitrocarburizing of mechanical compounds. These conditions fit well with the usual tempering temperatures of hot-work tool steels, which form the main field of application of salt bath nitrocarburizing in tooling with treatment times of 15 min to 2 h.

 To guarantee a good reproducible nitriding performance, the cyanate content must be kept at approximately 35% to achieve a full ε-nitride compound layer, which today is usually done by adding a regenerator. The advantages of salt bath nitrocarburizing can be found in the very homogeneous temperature distribution, the fast formation of thick compound layers that give good tribological and corrosion properties, its high flexibility, and he fact that it does not require that any special attention be given to passivation effects. Extrusion dies are regularly treated several times during use to restore the nitride layer at areas of heavy wear.

More recently special salt compositions were developed for lower nitrocarburizing temperatures, which are essential for cold-work tool steels that do have lower tempering temperatures.

For more information, click on the link below (subscription required). Then scroll to Figure 21

R Schneider ; R. Mesquita ; H. Altena ; T. Müller ; P. Seemann,Processes and Furnace Equipment for Heat Treating of Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Kanthal and Rath announce strategic partnership to expand sustainable industrial heating technology offerings

Kanthal and Rath, Amherst, NY, have announced a strategic partnership aimed at expanding their combined offering in industrial heating technology. This collaboration is set to benefit industries such as steel and petrochemical as they strive to transition to greener practices.

By joining forces, Kanthal and Rath will create the most extensive range of sustainable industrial heating solutions available in the market. Kanthal’s expertise in heating elements and systems, combined with Rath’s premium insulation and refractory products, will provide customers with a unique and comprehensive offering to meet their industrial heating needs.

Robert Stål, president of Kanthal, expressed enthusiasm about the partnership, stating, “We are thrilled to partner with Rath to further expand our offerings in industrial heating technology, enabling societies and industries to make the green shift. In this era of electrification, this partnership will provide our customers with a broader range of innovative solutions that will enable them to optimize their operations and achieve their sustainability goals. Together, we can leverage our collective expertise to deliver greater value to our customers and help them thrive in a rapidly evolving market.”

Andreas Pfneiszl, CFO/CSO of Rath, emphasized their focus on sustainability, particularly in developing energy-saving refractory products and materials for electrically heated furnaces. He stated, “With our strategic partner Kanthal, we will enable customers’ shift towards fossil-fuel-free production.” This partnership aligns with Rath’s commitment to environmentally friendly practices.

Through closer collaboration in developing new technologies and solutions, Kanthal and Rath will leverage their expertise to drive the technology shift that industries like steel and petrochemical are currently undergoing. The joint go-to-market model will provide customers with a comprehensive portfolio of products and services, offering enhanced value and convenience.

Read further here. 

Multi-furnace heat treat project for major steel forger

Nutec Bickley, Mexico, has been awarded a contract to manufacture and install five new lift-up furnaces, along with a fully modernized combustion system, for a leading U.S. manufacturer of high-quality alloy steel and carbon steel closed-die forgings. The project will take place between May and December 2023, with onsite work completed one furnace at a time to ensure the customer’s production schedules are not impacted. Two of the new furnaces will be used for tempering, while the remaining three will be used for austenitizing. Each furnace will be fitted with the latest control systems, complete fiber flues, and new exhaust and pressure control systems, along with insulation.

Nutec Bickley’s state-of-the-art combustion packages will be fully compliant with NFPA 86 standards, incorporating a fuel-only control system to allow maximum temperature uniformity potential for all cycles. The retrofitted furnaces will benefit from high-velocity nozzle mixing burners fitted with high-temperature burner blocks. The combustion systems will also feature automatic air control valves to adjust the maximum air volume used and to ensure proper burner ignition conditions.

The project will involve careful teamwork between the customer and Nutec Bickley to ensure successful delivery and highest quality outcomes. Rodrigo González, VP Metals at Nutec Bickley, emphasized the importance of constant communication and status updates with customers for a dynamic and mutually beneficial project result.

 

Read further here