Medical implant hardening in a SECO/WARWICK furnace

SECO/WARWICK, Meadville, PA, announced that they will supply a Vector vacuum furnace to the Marle Group, a global manufacturer of orthopedic prostheses. The furnace on order will be used for the heat treatment of cobalt implants. Cobalt alloy hardening requires very high temperatures, and the heating process for these materials require a high puriity environment, temperature uniformity and very fast and effective cooling.

In order for cobalt alloys to be used in implantology, they must be deprived of their ferromagnetic properties. This shiny, hard metal loses this property only when it reaches a temperature higher than 1131°C. Such a high temperature makes it necessary to use a vacuum furnace in the implant production process. The furnace can not only provide such a temperature, but also guarantees its maintenance over a longer period of time. As a comparison, the temperature, above which a ferSECO/WARWICK, Meadville, PA, announced that they will supply a Vector vacuum furnace to the Marle Group, a global manufacturer of orthopedic prostheses. The furnace on order will be used for the heat treatment of cobalt implants. Cobalt alloy hardening requires very high temperatures, and the heating process for these materials require a high puriity environment, temperature uniformity and very fast and effective cooling.


Read further here.

Three from Aalberts Surface Technologies included in this years 40 under 40

Aalberts Technologies, Livonia, announced today that Angella Sell, Connor Montgomery, and Chris Pietszak are members of Heat Treat Today’s 40 Under 40 Class of 2023. The Heat Treat Today 40 Under 40 award recognizes rising leaders in the heat treat community who are giving their time, talent, and education to make the industry a great place to work.

Angella Sell, Research & Development Engineer, is a proven leader, having chaired the ASM Detroit Chapter from June 2020 to June 2021. In 2022 Angella received the ASM Detroit Chapter President’s Award for her leadership role during the challenging pandemic years. Angella is the vice-chair of the AFS Cast Iron Research Committee and will assume the role of chair in May 2024. 

Connor Montgomery, Oshkosh Plant Manager, is focused on hiring and retention practices as well on effective communications. Connor is leading major efforts to improve flow, efficiency, and throughput in the Oshkosh plant. He has introduced the use of modern lean tools such as 5S, FIFO, and Supermarkets to reduce unproductive manhours. He is actively involved in the reduction of additional waste within plant processing. 

Chris Pietszak, Quality Manager, is focsed on the implementation of and support of ISO, IATF, and Nadcap as well as CQI-9 compliance. He is a trained ISO and IATF auditor and an MTI YES Program graduate. Chris played an important role implementing the quality systems during the start-up of the Fort Smith facility. 

Read further here

Constellium’s operations in Muscle Shoals and Bowling Green certified by the Aluminium Stewardship Initiative (ASI)

Constellium, Pairs, announced that it has received the Aluminium Stewardship Initiative (ASI) Performance Standard certificate for its facilities in Muscle Shoals, Alabama, and Bowling Green, Kentucky. This certification, verified by an independent third-party audit, means that the plants operate according to a strict set of governance, environmental, and social standards, including greenhouse gas emissions, biodiversity and labor rights.

The Constellium Muscle Shoals plant is a major aluminium cansheet supplier for the packaging market with over 450,000 metric tons of finished aluminium coils per year. The facility also produces aluminium automotive coils, which are processed at the Bowling Green plant. Muscle Shoals’ world-class recycling center is able to recycle the equivalent of 20 billion aluminium cans per year. Constellium’s Bowling Green plant produces flat rolled aluminium Auto Body Sheet products for the automotive market, with a capacity to produce 100,000 metric tons annually.

Read further here.

Nitrex and Linde renew their 13-year collaboration

Nitrex, Quebec, and Linde are celebrating their 13-year collaboration, which today covers Europe and North America. Nitrex said that this partnership emphasizes both companies’ positioning in terms of technology, digital, and green footprints. 

The cooperation between Linde (previously Praxair) and UPC-Marathon, a Nitrex company, began in the USA in 2010, when Linde approached UPC-Marathon to build gas panels. Eventually, the company started sending some of its clients who needed technical support in UPC’s direction.

Nitrex supplies Linde with equipment and analyses to control gas atmospheres, thanks to its competence in heat treatment and electrical fields, technical solutions, support, and world-class gas panels.

Read further here.

Solar Atmospheres of Michigan’s relocation charges forward

Solar Atmospheres, Chesterfield, MI, formerly known as Vac-Met Inc., has successfully reached its first milestone in the relocation phase. Solar invested over $5 million of new equipment installed with all new utilities. 

The new equipment includes two vacuum furnaces, an air tempering furnace, and a freezer. As a result, Solar was able to host their first AS9100D audit at the new facility in Chesterfield Michigan. This quality management system audit for aviation, space and defense organizations which incorporates ISO9001 standards passed with zero findings.After purchasing the company one year ago, the goal was to build a new facility with no impact on the existing customer base. 

Read further here 

Processing of nano-reinforced aluminum hybrid metal matrix composites and the effect of post-heat treatment: a review

A review from the School of Engineering and Technology, India, describes the increasing demand for cutting-edge materials with a high strength-to-weight ratio and economic considerations. Lightweight materials such as aluminum (Al) and its alloys are attractive, but some properties such as low thermal stability and high wear rate limit the application of aluminum alloys (AA) to some extent. Many researchers have developed various composites to get around these restrictions and increase the performance of aluminum and its alloy. Metal matrix composites (MMCs) with nanoparticles have revealed greater mechanical and tribological properties compared with micron-sized reinforcements. This review summarizes the latest developments in this field.

Read further here. 

 

Wisconsin oven completes spray quench aluminum solution furnace for the defense industry

Wisconsin Oven, East Troy, Wis. announced the completion of a Horizontal Spray Quench Furnace for C/A Design located in Dover, NH. This furnace will be used for the solution treatment of aluminum. The system is designed to soak the product load at temperature in the furnace and then a pusher mechanism rapidly moves the load into the spray quench. The spray quench offers reduced distortion in comparison to submersion quenching.

The maximum temperature for this system is 1,150°F and it has sufficient capacity to heat a 200 pound aluminum load plus the work grid and product fixture. A temperature uniformity survey was documented for +/-10°F at 985°F to verify the furnace has the capability to meet AMS 2750G, Class 2 furnace and Instrumentation Type D requirements.

The spray quench is located in front of the oven and has vertical-lift, pneumatically operated doors on each end. The spray quench system utilizes fifty (50) fine mist nozzles located above, below, and on each side of the quench chamber to rapidly cool the product from all sides. Each nozzle is independently selectable from the touchscreen HMI and a variable frequency drive allows the pump speed to be adjusted to maintain a constant pressure to each spray nozzle. 

Read further here.

One Minute Mentor: Salt Bath Furnaces

The salt bath method of hardening is predominant with high-speed steel tools. With correct operating conditions, tools can be heat treated without carburization, decarburization, and scaling. The surface will be fully hard with a minimum of distortion. The four types of salt baths generally used are preheating baths, high-temperature baths, quenching baths, and tempering baths.

Molten salts of various compositions are well adapted to all operations in the heat treatment of tool steels. For tools that cannot be ground after hardening or for tools that require an excellent surface condition and the maintenance of sharp edges, salt bath heating provides excellent results. These salt baths contain different compositions of BaCl2, NaCl2, and KCl as well as additional additives to avoid decarburization. The higher the working temperature, the higher the content of BaCl2 usually is. Higher additions of CaCl2 are typically used in salt baths for the quenching step.

For more information, click on the link below (subscription required). Then scroll to Figure 2.

R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Rolled Alloys celebrates 70 years in the thermal processing industry

Rolled Alloys, Windsor, Conn., is celebrating 70 years in the thermal processing industry. 

The company was founded in 1953 by introducing RA330 as a wrought replacement to cast HT.

Due to RA330’s versatility and availability, it remains the most widely used wrought alloy by commercial heat treaters. Although RA330 exhibits excellent features, there may be better choices for an application. With this being the case, we offer a wide range of heat-resistant alloys to best suit the needs of your application.

Besides this, RA 602 CA is an alloy developed specifically for the highest temperature process, requiring strength and resistance to atmospheres. 

One last alloy worth discussing is RA253MA. RA253MA is a lean, heat-resistant stainless steel with high strength and oxidation resistance. With excellent high-temperature properties and low nickel content, RA253MA is a cost-effective material that thermal processors frequently utilize for open-air applications.

https://www.rolledalloys.com/70-years-in-the-thermal-processing-industry/

Steel Dynamics named one of America’s best employers for women by Forbes

Steel Dynamics, Fort Wayne, Ind., has been named one of America’s Best Employers for Women for 2023 by Forbes. Steel Dynamics was the only steel producer receiving this designation.

“We are appreciative and honored by this recognition,” said Mark D. Millett, chairman and chief executive officer. “Our people are the foundation of our success and our most important resource. We strive to create a welcoming, open, and inclusive environment. We value our team members, creating meaningful opportunities for growth, leadership development, and career advancement. We believe empowering our people and providing them with the necessary tools for success creates significant value for everyone and will drive our continued success.”

Forbes partnered with Statista to compile the list of America’s Best Employers for Women. Statista surveyed over 60,000 U.S. employees working for companies with a minimum of 1,000 employees. More than 40,000 women were asked to rate their company in areas such as working environment, salary and employee diversity, and then whether they would recommend their company to a friend or family member.

Read further here.