Constellium honored with supplier of the year award from stellantis for csr excellence

Constellium, Paris, announced that it has been awarded the Supplier of the Year Award by Stellantis, recognizing the company’s strong commitment to corporate social responsibility (CSR). This honor reflects Constellium’s dedication to high CSR standards in both its operations and supply chain, which has earned positive ratings from several international rating agencies. A long-standing supplier for Stellantis brands, Constellium provides aluminum body sheet products and extrusion-based structural solutions for various vehicle platforms across Europe and the U.S.

Constellium’s approach to sustainability has been acknowledged by independent organizations, including EcoVadis, the Carbon Disclosure Project (CDP), MSCI ESG Ratings, and ISS-Oekom. As a founding member of the Aluminium Stewardship Initiative (ASI), Constellium recently achieved ASI Performance Standard Certification for all global operations.

Ingrid Joerg, executive vice president and chief operating officer at Constellium, expressed pride in the award from Stellantis, noting that it underscores the company’s dedication to responsible purchasing and sustainable solutions. The award was presented at Stellantis’s annual event in Turin, Italy, where Maxime Picat, stellantis chief purchasing and supply chain officer, emphasized the critical role of suppliers in supporting Stellantis’s growth through their commitment to quality and collaboration. Constellium, dedicated to delivering sustainable aluminum products, publishes annual sustainability reports to highlight its progress and results in this area

Read further here.

One Minute Mentor: Distortion of Ledeburitic Cold-Work Tool Steels

The different effects of steel composition on the dimensional change of plates made of ledeburitic cold-work tool steels and a working hardness of 61 HRC can be taken from the figure. Typical representatives of the new generation of improved toughness 8-9%Cr-steels show slightly higher growth in dimension than the classical 12%Cr-D2 steel. 

The growth in thickness (in the rolling direction) is always significantly higher than in width, confirming again the generally known behavior. Salt-bath heat treatment results in higher distortion than various vacuum heat treatments with high-pressure gas quenching, but the results indicate that there is also a significant scatter for gas quenching depending on the detailed quenching conditions. 

For more information, click on the link below (subscription required). Then scroll to Figure 12. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Ipsen USA launches service HUB Model for improved customer support

Ipsen USA, Cherry Valley, Illinois, announced the launch of its new Service HUB model, aimed at enhancing customer support across the United States. The HUB system, developed over the past two years under the leadership of Ipsen Global CEO Geoffrey Somary and currently overseen by Chief Service Officer John Dykstra, is now fully operational across the Midwest and Southeastern regions.

The HUBs are designed to offer quicker response times, with dedicated teams that provide tailored service for customers in close geographic proximity. This model allows Ipsen to optimize service efficiency, reducing downtime for heat-treating operations and improving customer experience.

In addition to benefiting customers, the HUB model also enhances the work-life balance of Ipsen’s Field Service Engineers (FSEs) by reducing travel time. The initiative is led by Lu Chouraki, Manager of Business Development, who emphasized the goal of minimizing response times and improving support for customers facing operational outages.

This strategic shift reflects Ipsen’s commitment to service excellence, offering personalized, regional expertise that both empowers its team and delivers enhanced support to customers.

Read further here. 

Nitrex celebrates 40 Years of innovation in heat treatment solutions

Nitrex, Quebec, announced that it is celebrating its 40th anniversary this year, marking four decades of growth and innovation in the heat treatment industry. Founded in 1984, Nitrex has evolved from a pioneer in controlled nitriding to a global leader offering end-to-end heat treatment solutions. The company’s technological advancements have expanded its capabilities to encompass metallurgy, engineering, process optimization, and automation.

Since 2019, under the current leadership, Nitrex has broadened its portfolio to include advanced vacuum furnaces and introduced technology for improved brake rotor performance. The company has also launched digital platforms such as QMULUS, aimed at optimizing customer processes and boosting operational efficiency.

In addition to its own milestone, Nitrex is celebrating the 50th anniversary of its UPC-Marathon office in Germany, recognizing the long-standing contributions and achievements of its global team. These anniversaries reflect Nitrex’s ongoing commitment to innovation and excellence.

Read further here.

Bodycote presented aerospace materials solutions at Farnborough International Airshow

Bodycote, Macclesfield, U.K., participated in the 2024 Farnborough International Airshow, held this summer.

Bodycote showcased its advanced thermal processing solutions specifically designed for the aerospace industry. The airshow, a key event for aerospace innovation, emphasizes themes like sustainability, future flight, and workforce development, providing Bodycote with a platform to highlight its role in enhancing the performance and reliability of aerospace components.

At the event, visitors could explore Bodycote’s range of services, including heat treatment, metal joining, and specialized thermal processes such as hot isostatic pressing and thermal spray coatings. These processes are essential for improving the properties of metals and alloys in aerospace applications, helping them withstand the stringent requirements of the industry.

Bodycote’s presence at the Farnborough Airshow underscores its expertise and ongoing commitment to fostering collaborations that drive progress in the aerospace, aviation, and defense sectors.

Read further here. 

SECO/WARWICK supplies vacuum furnaces to Huake Casting Control Technology Co., Ltd.

SECO/WARWICK, Meadville, PA, will provide a horizontal vacuum heat treatment furnace equipped with a graphite heating chamber and a 15 bar absolute gas quenching system. The furnace will be used by the Chinese manufacturer to produce components for the aviation and energy industries.

The Vector furnace, known for its versatility and modular design, is a widely used solution in over 70 countries. It offers a broad range of heat treatment processes, making it adaptable to specific manufacturing needs. Its low energy consumption and minimal emissions make it environmentally friendly, aligning with SECO/WARWICK’s commitment to sustainability.

The furnace also guarantees precise, repeatable results due to uniform temperature control, ensuring high-quality components and surface protection. Vector furnaces are popular for metal heat treatment worldwide, particularly for industries requiring precision and reliability.

Read further here.

Ipsen announces launch of field service engineer academy

Ipsen, Cherry Valley, IL, has announced the launch of its Field Service Engineer (FSE) Academy, a 20-week training program aimed at strengthening the Ipsen Customer Service (ICS) Team. The program includes both classroom instruction at the company’s TDC facility in Cherry Valley, Illinois, and hands-on field training with veteran technicians. While primarily designed for new hires, experienced engineers can also participate, with regional service managers directing them to specific modules based on their skill level assessments.

The academy will focus on the fundamentals of vacuum furnace repair, giving technicians a comprehensive understanding of Ipsen’s equipment and customer applications. Technical Training Lead Cavan Cardenas noted, “From day one, we want our technicians to grasp how our products work and their purpose in the field.”

In addition to technical training, the program will develop soft skills and address the demands of a service-driven role, preparing recruits for a dynamic, on-the-road service environment.

Read further here.

ECM USA announces partnership with PAI Industries for in-house furnace system

ECM USA,  Pleasant Prairie, WI, announced a partnership with PAI Industries to enhance manufacturing capabilities by introducing an in-house carburizing vacuum furnace system. PAI Industries, a leading provider of parts for the heavy-duty truck industry, will integrate the ECM NANO vacuum furnace into its 112,000 sq. ft. facility in Suwanee, GA, moving away from outsourced heat treatment.

This addition enables PAI Industries to perform low-pressure carburizing and through-hardening processes continuously, improving production speed and capacity. The ECM NANO system, featuring an external loader, three-position temper oven, and queuing positions, offers benefits such as no internal oxidation (IGO), zero CO2 emissions, reduced fire risk, and improved metallurgical outcomes. Testing was conducted at ECM USA’s Synergy Center to validate these advantages before project acceptance.

Read further here

Researchers overcome manufacturing challenges in aluminum alloys with nano-treatment

Researchers at the University of California, Los Angeles, have achieved a significant breakthrough in the field of metal additive manufacturing (AM), specifically with Al–Cu alloys like AA2024, which are prevalent in the aerospace and automotive industries. 

These alloys are known for their high strength and good fatigue resistance but have been notoriously difficult to work with in additive manufacturing due to issues like hot cracking and other solidification defects.

The UCLA team has successfully developed a nano-treated AA2024 deposition that incorporates TiC nanoparticles, leading to a groundbreaking enhancement in the manufacturing process. This new method allows for the additive manufacturing of AA2024 without the occurrence of cracks, a common issue that has hindered broader adoption of these materials in high-precision sectors.

Microstructural analysis conducted by the researchers reveals that the TiC nanoparticles not only reduce the susceptibility to hot cracking but also refine and homogenize the grain structure of the alloy. The grains were significantly refined to an average size of 23.2 ± 0.4 μm. This refinement contributes to the material’s enhanced properties, including its mechanical performance.

These findings highlight the potential of nano-treatment techniques in overcoming the longstanding challenges associated with high-strength aluminum in additive manufacturing. This advancement not only paves the way for more reliable production of critical components in aerospace and automotive applications but also promises to expand the capabilities and applications of metal additive manufacturing technology.

Read further here. 

Solar Atmospheres awarded Lockheed Martin space systems approval

Solar Atmospheres, Greenville, SC, has announced that it has been awarded Lockheed Martin Space Systems approval. With this approval, now all five Solar Atmospheres facilities are an option for our customers with Lockheed Martin requirements for thermal processing services.

Steve Prout, President of Solar Atmospheres’ Greenville facility states: “We are proud to once again provide our customers in the Southeastern U.S. with another regional option for aerospace and defense thermal processes, saving them time and money while continuing to deliver the high level of quality required.”

With the ability to support vacuum thermal processing needs ranging from development cycles to 50,000 pound loads at temperatures of up to 2400°F, Solar Atmospheres provides AS9100 and Nadcap quality accredited heat treatments, providing our customers with the confidence their product is being processed as specified.

Read further here.