Medical implant hardening in a SECO/WARWICK furnace

SECO/WARWICK, Meadville, PA, announced that they will supply a Vector vacuum furnace to the Marle Group, a global manufacturer of orthopedic prostheses. The furnace on order will be used for the heat treatment of cobalt implants. Cobalt alloy hardening requires very high temperatures, and the heating process for these materials require a high puriity environment, temperature uniformity and very fast and effective cooling.

In order for cobalt alloys to be used in implantology, they must be deprived of their ferromagnetic properties. This shiny, hard metal loses this property only when it reaches a temperature higher than 1131°C. Such a high temperature makes it necessary to use a vacuum furnace in the implant production process. The furnace can not only provide such a temperature, but also guarantees its maintenance over a longer period of time. As a comparison, the temperature, above which a ferSECO/WARWICK, Meadville, PA, announced that they will supply a Vector vacuum furnace to the Marle Group, a global manufacturer of orthopedic prostheses. The furnace on order will be used for the heat treatment of cobalt implants. Cobalt alloy hardening requires very high temperatures, and the heating process for these materials require a high puriity environment, temperature uniformity and very fast and effective cooling.


Read further here.

One Minute Mentor: Fluidized Bed

A fluid bed results when a gas is passed upward through a bed of small solid particles at a rate fast enough to lift these particles and to create turbulence. This motion of particles, which are usually made of aluminum oxide or silica oxide, is similar to that of a fluid, which can be seen schematically in the figure.

When gas is forced upward through small holes in a supporting plate, two forces meet to raise the particles: the buoyancy of the gas and the retarding force known as aerodynamic drag. Objects to be heat treated are immersed directly into the bed of particles.

For more information, click on the link below (subscription required). Then scroll to Figure 7.

R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Ipsen ships Turbo Treater vacuum furnace to commercial heat treater in Mexico

Ipsen, Tainan City, Taiwan, has shipped a vacuum furnace to Tratamientos Termicos Avanzados (TTA) in Mexico. Translated to “Advanced Heat Treatments,” TTA is a leader in plasma nitriding services for steel. They serve many industries and boast a clientele that includes John Deere, Caterpillar and Nissan.

Looking to expand their capabilities by adding vacuum processing to their commercial heat-treating business, they chose an Ipsen Turbo2Treater for its process flexibility. The new furnace has a work zone size of 24” x 24” x 36”, 1,600 lb. weight capacity, 2,400 °F maximum operating temperature, and quench pressure up to 12 bar. It will mainly be used for hardening tool steels but can easily be adapted to meet new customers’ needs.

TTA chose Ipsen for their ability to lead them in the right direction to grow their business.

https://ipsenglobal.com/knowledge-center/ipsen-ships-vacuum-furnace-to-heat-treater-in-mexico/

Seco/Warwick furnace to process Jet Engine components

Seco/Warwick, Meadville, PA, has developed a system to perform clean brazing processes in high vacuum as efficiently as possible, ensuring the highest protection of the treated part surfaces. The solution will be used to process jet engine components.

The German Partner carries out comprehensive repairs of technologically advanced jet engines. The company also has a research center which develops innovative repair techniques for various types of components and entire engines. The group employs several thousand qualified employees in various locations around the world and is a leader among companies repairing and providing full service MRO for jet engines. The purchase of a vertical vacuum furnace will improve production processes and significantly increase the commercial heat treater’s efficiency.

Read further here.

Quintus hot isostatic press powers new UK HIP centre

Quintus, Västerås, Sweden, has supplied a Hot Isostatic Press (HIP) to Wallwork Group’s new HIP Centre stated to open in Bury, North Manchester, England, in September 2023. The press is the model QIH 173L M URC, equipped with Quintus’ proprietary uniform rapid cooling (URC), a feature that delivers the high material uniformity required of parts designed formission-critical applications, while enabling increased productivity with optimal temperature control.

Operating at a maximum temperature of 1250°C (2282°F) and pressure of 207 MPa (30,000 psi), the technologically advanced press has a work zone measuring 800 mm (34.6 inches) in diameter and 2550 mm (100.4 inches) high, and a capacity of over 7000 kg (15,432 lbs) per cycle.

Read further here.

Nitrex strengthens global presence in extrusion

Nitrex, Quebec, successfully commissioned two nitriding systems for Alumil S.A., Greece’s largest extrusion company and the leading producer of architectural systems, with an international sales network in over 60 countries worldwide. 

With this collaboration, Nitrex further strengthens its global presence in extrusion profile manufacturing, demonstrating the industry’s confidence in Nitrex’s expertise to optimize die performance, increase the throughput of extruded profiles, and reduce overall tooling costs.

Catering to various sectors, including construction, automotive, energy, and more, and serving as a key exporter to Europe, the Middle East, and the USA, Alumil has recently started up two pit-type nitriding systems installed at separate locations. The first system, an NX-1215 model with a 3-ton load capacity, is operational at Alumil’s facility in Greece. The second system, an NX-620 furnace model with a 1.2-ton load capacity, is located at the company’s operation in Serbia.

The turnkey solution provided by Nitrex includes the exclusive Nitreg® technology, ensuring consistent and superior nitriding results. In anticipation of Alumil’s plans to expand manufacturing capacities in Greece, the system installed at this location has been specially sized up to accommodate future growth.

Read further here

Nitrex strengthens global presence in extrusion

Nitrex, Quebec, successfully commissioned two nitriding systems for Alumil S.A., Greece’s largest extrusion company and the leading producer of architectural systems, with an international sales network in over 60 countries worldwide. 

With this collaboration, Nitrex further strengthens its global presence in extrusion profile manufacturing, demonstrating the industry’s confidence in Nitrex’s expertise to optimize die performance, increase the throughput of extruded profiles, and reduce overall tooling costs.

Catering to various sectors, including construction, automotive, energy, and more, and serving as a key exporter to Europe, the Middle East, and the USA, Alumil has recently started up two pit-type nitriding systems installed at separate locations. The first system, an NX-1215 model with a 3-ton load capacity, is operational at Alumil’s facility in Greece. The second system, an NX-620 furnace model with a 1.2-ton load capacity, is located at the company’s operation in Serbia.

The turnkey solution provided by Nitrex includes the exclusive Nitreg® technology, ensuring consistent and superior nitriding results. In anticipation of Alumil’s plans to expand manufacturing capacities in Greece, the system installed at this location has been specially sized up to accommodate future growth.

Read further here

One Minute Mentor: Distortion in Tool Steels

Distortion in tool steels encompasses all irreversible dimensional changes. There are two main types: size distortion and shape distortion. Size distortion involves expansion or contraction in volume or linear dimensions without changes in geometrical form. Shape distortion entails changes in curvature or angular relations, as in twisting, bending, and/or nonsymmetrical changes in dimensions. In most cases both types of distortion occur during a heat-treatment operation.

Some of the main interactions occur between temperature, microstructure, and stress/strain. Especially for tool steels these interactions are mainly influenced by the carbon content in the steel matrix, the types and relative amounts of the alloying elements, and the carbide formation/transformation/precipitation characteristics of the alloy system.

For more information, click on the link below (subscription required). Then scroll to Figure 1..

R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Constellium to sell three german extrusion plants to Vaessen Aluminium

Constellium, Paris,  announced that it signed a binding agreement with Vaessen Aluminium for the sale of three of Constellium’s soft alloy extrusion facilities located in Landau, Crailsheim and Burg in Germany for a total cash consideration of €48.8 million.

With nearly 450 employees, the three Constellium plants specialize in soft alloy extruded products for the Building & Construction, Transportation and Industry markets in Europe.

Vaessen Aluminium belongs to a longstanding family-owned industrial group, headquartered in Belgium, active in aluminum billets and profiles (E-Max), in lighting and ceiling (Kreon) and in wall cladding (Limeparts Drooghmans).

The transaction is expected to close in the second half of 2023 and is subject to customary closing conditions and regulatory approval.

Read further here.

Lehigh’s summer engineering institute students tour Solar Atmospheres

Solar Atmospheres, Souderton, Pa., hosted over 40 high school students enrolled in the Summer Engineering Institute (SEI) at Lehigh University. The SEI program, under the guidance of Director Dr. Laura Moyer, is a two-week residential program, running two sessions back to back. 

Students are nominated by faculty of local high schools, and the program specifically targets under-represented groups including girls, first-generation students, and students who might otherwise have limited opportunities to study in the fields of science, technology, engineering, and math (STEM).

Solar Atmospheres provided a tour of the campus, exhibiting materials and processes for intriguing applications in a variety of markets. The students experienced a manufacturing setting encompassing related topics from their curriculum, gaining a better understanding of heat treating and manufacturing, and how cutting edge technology reshapes centuries-old processes.

Read further here.