One Minute Mentor: Distortion of Corrosion-Resistant Plastic Mold Steels

Corrosion-resistant plastic mold steels are usually tempered at lower tempering temperatures than hot-work, high-alloyed cold-work, or high-speed steels. A comparison of different types of corrosion-resistant plastic mold steels with the widely used cold-work tool steel D2 with the same dimensions as in the previous example for cold-work tool steels for such heat treatment conditions can be seen in the figure and shows that all steels show a similar low dimension change in width. Regarding the thickness of the plates there is a significantly higher increase for the ledeburitic cold-work tool steel. Vacuum heat treatment with high-pressure gas quenching leads to a similar amount of distortion as salt bath heat treatments but again shows significant scatter.

For more information, click on the link below (subscription required). Then scroll to Figure 13. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Aalberts Surface Technologies publishes new white paper on bainitic bearings

Aalberts Surface Technologies, Livonia, Mich., announced the release of a new white paper focused on bainitic bearings, authored by Jeremy Lipshaw, Kathy Hayrynen, and Steve Metz. This white paper complements the company’s recent ASTM publication, “A Review of Austempering for Bainitic Bearings,” providing an in-depth look at innovative techniques and advancements in the field of bainitic bearings.

In this latest work, Aalberts experts explore the applications, benefits, and advancements in materials science related to bainitic bearings, highlighting the company’s ongoing commitment to excellence in surface technologies and precision engineering. The white paper expands on research presented in the conference paper, “A Review of Austempering for Bearing Applications,” which appears in the ASTM International book Bearing and Transmission Steels Technology.

Read further here.

Centorr Vacuum names Sean P. Murphy as product manager for laboratory and r&d furnaces

Centorr Vacuum, Nashua, NH, announced that Sean P. Murphy has been appointed as the product manager for its laboratory and R&D furnace product lines. Murphy will oversee more than 30 vacuum furnace lines that cater to laboratory applications across the metals, ceramics, and carbon/graphite/composites industries. His client base includes national laboratories, universities, and industrial customers worldwide who require compact laboratory and R&D equipment.

Murphy brings a wealth of experience to Centorr, having previously served as senior manufacturing manager at Osram Sylvania’s Exeter, NH location, where he focused on micro-LED ceramic automotive products. His expertise spans hydrogen sintering, spark plasma sintering, and annealing, among other manufacturing processes. Murphy holds a bachelor’s degree in materials science from Alfred University and an MBA from Southern New Hampshire University and is actively involved in the American Ceramic Society, ASM Heat Treat Society, and Society of Automotive Engineers.

Centorr Vacuum Industries, established in 1954 and currently celebrating its 70th anniversary, is known for its high-temperature vacuum and controlled atmosphere furnaces, with over 7,000 units installed globally. The company’s Nashua headquarters includes a dedicated aftermarket field service team and an Applied Technology Center that provides R&D support and toll production services.

For more information please visit www.centorr.com

Solar atmospheres South Carolina facility earns approval from Parker Aerospace

Solar Atmospheres, Greenville, SC, announced that its facility has received approval from Parker Aerospace, further expanding the company’s capabilities to meet aerospace industry demands. With this new certification, Solar Atmospheres now operates five locations capable of fulfilling Parker Aerospace’s specific thermal processing requirements.

Steve Prout, president of Solar Atmospheres’ Greenville site, highlighted the value this approval brings to customers in the Southeastern U.S., providing them with a local, efficient option for aerospace and defense thermal processing services. He noted that this addition will help customers reduce costs and lead times while ensuring the high quality that Solar Atmospheres consistently delivers. Solar Atmospheres offers comprehensive vacuum thermal processing services, handling loads up to 50,000 pounds and temperatures reaching 2400°F. With AS9100 and Nadcap accreditations, the company maintains rigorous standards to ensure reliable and precise heat treatments, meeting the exacting requirements of the aerospace sector.

Read further here.

Constellium honored with supplier of the year award from stellantis for csr excellence

Constellium, Paris, announced that it has been awarded the Supplier of the Year Award by Stellantis, recognizing the company’s strong commitment to corporate social responsibility (CSR). This honor reflects Constellium’s dedication to high CSR standards in both its operations and supply chain, which has earned positive ratings from several international rating agencies. A long-standing supplier for Stellantis brands, Constellium provides aluminum body sheet products and extrusion-based structural solutions for various vehicle platforms across Europe and the U.S.

Constellium’s approach to sustainability has been acknowledged by independent organizations, including EcoVadis, the Carbon Disclosure Project (CDP), MSCI ESG Ratings, and ISS-Oekom. As a founding member of the Aluminium Stewardship Initiative (ASI), Constellium recently achieved ASI Performance Standard Certification for all global operations.

Ingrid Joerg, executive vice president and chief operating officer at Constellium, expressed pride in the award from Stellantis, noting that it underscores the company’s dedication to responsible purchasing and sustainable solutions. The award was presented at Stellantis’s annual event in Turin, Italy, where Maxime Picat, stellantis chief purchasing and supply chain officer, emphasized the critical role of suppliers in supporting Stellantis’s growth through their commitment to quality and collaboration. Constellium, dedicated to delivering sustainable aluminum products, publishes annual sustainability reports to highlight its progress and results in this area

Read further here.

One Minute Mentor: Distortion of Ledeburitic Cold-Work Tool Steels

The different effects of steel composition on the dimensional change of plates made of ledeburitic cold-work tool steels and a working hardness of 61 HRC can be taken from the figure. Typical representatives of the new generation of improved toughness 8-9%Cr-steels show slightly higher growth in dimension than the classical 12%Cr-D2 steel. 

The growth in thickness (in the rolling direction) is always significantly higher than in width, confirming again the generally known behavior. Salt-bath heat treatment results in higher distortion than various vacuum heat treatments with high-pressure gas quenching, but the results indicate that there is also a significant scatter for gas quenching depending on the detailed quenching conditions. 

For more information, click on the link below (subscription required). Then scroll to Figure 12. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Wisconsin Oven ships composite curing oven to Defense Industry

Wisconsin Oven, East Troy, WI, has announced the shipment of a gas-fired walk-in batch oven to a prominent manufacturer in the defense industry. The oven is designed for curing filament wound composite materials and is capable of processing a 78,000-pound load on a 40-foot long mandrel carried by a load car.

The work chamber measures 10 feet wide, 42 feet long, and 9 feet high, with a qualified work zone of 8 feet by 40 feet by 8 feet. The oven includes a rotation system to prevent drooping of uncured composites during the heating process, offering speed control flexibility through a variable frequency drive.

This oven operates at a maximum temperature of 500°F, with temperature uniformity of ±10°F at multiple setpoints. Equipped with a PLC-based Wisconsin Oven Premium Control System and an IoT system, it allows for real-time monitoring, predictive maintenance, and remote fault diagnosis.

Additional features include split-line construction for easier shipping, two powerful recirculation blowers, interior lighting, and safety-compliant railings and ladder access.

Read further here.

Ipsen USA launches service HUB Model for improved customer support

Ipsen USA, Cherry Valley, Illinois, announced the launch of its new Service HUB model, aimed at enhancing customer support across the United States. The HUB system, developed over the past two years under the leadership of Ipsen Global CEO Geoffrey Somary and currently overseen by Chief Service Officer John Dykstra, is now fully operational across the Midwest and Southeastern regions.

The HUBs are designed to offer quicker response times, with dedicated teams that provide tailored service for customers in close geographic proximity. This model allows Ipsen to optimize service efficiency, reducing downtime for heat-treating operations and improving customer experience.

In addition to benefiting customers, the HUB model also enhances the work-life balance of Ipsen’s Field Service Engineers (FSEs) by reducing travel time. The initiative is led by Lu Chouraki, Manager of Business Development, who emphasized the goal of minimizing response times and improving support for customers facing operational outages.

This strategic shift reflects Ipsen’s commitment to service excellence, offering personalized, regional expertise that both empowers its team and delivers enhanced support to customers.

Read further here. 

Solar Manufacturing ships Mentor Pro furnaces for renewable energy applications

Solar Manufacturing, Sellersville, Pa., announced that it has shipped two Mentor Pro vacuum furnaces to a customer focused on developing advanced renewable energy technologies for large-scale industrial applications. The furnaces were selected after a collaborative process with the customer’s engineers, supported by the Research and Development team from Solar Manufacturing’s affiliate, Solar Atmospheres. The customer valued the furnace’s capabilities and compact design.

The Mentor Pro furnaces feature a molybdenum shielded hot zone, a maximum temperature capacity of 2500°F, and a workload capacity of up to 1000 pounds. They are equipped with SolarVac Essentials, a PLC-based control system, and include an internal gas quenching system with a 50 HP motor and variable frequency drive (VFD), offering flexibility in using nitrogen or argon gas for optimal metallurgical results. These features make the Mentor Pro well-suited for a variety of metallurgical applications in renewable energy development.

Read further here.

Nitrex celebrates 40 Years of innovation in heat treatment solutions

Nitrex, Quebec, announced that it is celebrating its 40th anniversary this year, marking four decades of growth and innovation in the heat treatment industry. Founded in 1984, Nitrex has evolved from a pioneer in controlled nitriding to a global leader offering end-to-end heat treatment solutions. The company’s technological advancements have expanded its capabilities to encompass metallurgy, engineering, process optimization, and automation.

Since 2019, under the current leadership, Nitrex has broadened its portfolio to include advanced vacuum furnaces and introduced technology for improved brake rotor performance. The company has also launched digital platforms such as QMULUS, aimed at optimizing customer processes and boosting operational efficiency.

In addition to its own milestone, Nitrex is celebrating the 50th anniversary of its UPC-Marathon office in Germany, recognizing the long-standing contributions and achievements of its global team. These anniversaries reflect Nitrex’s ongoing commitment to innovation and excellence.

Read further here.