On-Demand Webinars
Learn from industry experts without leaving your desk with ASM’s library of On-Demand webinars! ASM webinars deliver solution-driven content from ASM industry experts, and viewing is free of charge for all ASM members.
Enhance your Understanding of Composite Materials with Thermal Analysis
Sponsored by: Hitachi High-Tech • 06/29/22
Innovations and New Applications for Non-Ferrous Alloys Part 1: Aluminum
Co-Hosted by: ASM/IOM3 • 06/21/22
Managing your Business with Data Management
Sponsored by: ASM International • 06/23/22
The Use of EDS for QA and FA within Production Processes
Sponsored by: Oxford Instruments • 06/09/22
High Entropy Alloys
Jointly Sponsored by: ASM International • MRS • 06/01/22
Solidification Modelling With CALPHAD: Process Applications of Equilibrium and Non-equilibrium Models and When to Use Them
Sponsored by: Thermo-Calc Software • Presented by: Adam Hope • 05/12/22
Microstructure of Thermoplastic Compsite Materials
Sponsored by: Struers • Presented by: Ellis Perry • 04/26/22
Cultivating Your Executive Presence
Sponsored by: telos • Presented by: Bob Schultek and Mike Herzog • 03/30/22
Enhancing Materials Performance for Industry 4.0
Sponsored by: ASM International • 03/29/22
Solving Stainless Steel Materials Challenges with CALPHAD-based Tools
Sponsored by: Thermo-Calc Software Inc. • Presented by: Ben Sutton • 03/08/22
Novel Electron Detection and Imaging Strategies in the SEM for
Enhanced Quantification of Second Phases
Sponsored by: Thermo Fisher Scientific • Presented by: Dr. Hamish Fraser and Brandon Van Leer • 1/11/22
2021 Webinars
Polarized Light and Differential Interference Contrast in Metallography
Sponsored by: Leica Microsystems • Presented by: Sonika Gahlawat • 12/16/21
Solving Corrosion Challenges with Integrated Computational Materials Modeling
Sponsored by: Thermo-Calc Software Inc. • Presented by: Jim Rule • 12/09/21
Best Practices for Control of the Melting Process in Foundries
Sponsored by: Hitachi • Presented by: Michael Molderings • 12/01/21
Sustainability in Materials Engineering
Sponsored by: IOM3 and ASM International • Presented by: John Wolodko, FASM and Michael Clinch • Additional Speakers: Emma Wilcox, Neil Glover, Judith Todd, Colin Church and Ryan Milosh 11/17/21
Advanced Characterization of Steels at the Nano and Microscale
Sponsored by: Thermo Fisher Scientific • Presented by: Hui (Maggie) Shi, Mélanie Gauvin, and Davit Melkonyan 11/16/21
Using Clad Metal Innovations for Battery, Charging, and Thermal Management Challenges in Electric Vehicles
Sponsored by: Materion • Presented by: Sejin Im 11/11/21
Neurodiversity and Disability Inclusion in the Workplace
Sponsored by: ASM IDEA Committee • Presented by: Gee Abraham 11/10/21
Measuring Residual Stress via X-ray Diffraction – Applications in Metal Additive Manufacturing
Sponsored by: Stresstech • Presented by: James Thomas and Wade Gubbels 10/27/21
TSS Open Mic Series: Thermal Spray – A Remarkably Versatile Technology with Many Career Opportunities
Sponsored by: TSS • Presented by: Dr. Mark F. Smith, FASM, TSS HoF 10/20/21
The Influence of Bearing Material Properties on the Optimum Design of Heavily Loaded Bearings
Sponsored by: Materion • Presented by: Dave Krus 10/6/21
A Novel Reversible Scan Chain Technology that Improves Chain Diagnosis Resolution by 4X
Sponsored by: Siemens and Qualcomm Technologies • Presented by: Jayant D’Souza, Szczepan Urban, and Kun Young Chung 9/23/21
Hardness Testing: Sample Preparation and Other Parameters That Influence Results
Sponsored by: Struers • Presented by: Brian Jones 8/24/21
Sustainable Materials for Electric Vehicles
Sponsored by: Linde & UPC Marathon • Presented by: ASM and MRS 8/04/21
TSS Open Mic Series: Industry Panel Session
Sponsored by: TSS • Presented by: Mr. Charles Kay, FASM, Vice-President, ASB Industries, US and Mr. William Lenling, FASM, Co-Founder and CTO TST Engineered Coatings, US & President, ASM Thermal Spray Society 6/30/21
3D Imaging of Lithium-Ion Batteries
Sponsored by: ThermoFisher Scientific • Presented by: Udo de Vries and Herma Lemmens 6/23/21
Characterization of Multilayer Coatings: Composition and Thickness using Multiple Techniques
Sponsored by: HORIBA Scientific • Presented by: Philippe Hunault and Kayvon Savadkouei 6/22/21
TSS Open Mic Series: Microstructural Flexibility of Thermally Sprayed Ceramic Coatings
Sponsored by: TSS • Presented by: Dr. Robert Vassen, FASM 6/19/21
TSS Open Mic Series: A Few Simple Rules for Structuring Scientific Papers
Sponsored by: TSS • Presented by: Dr. Armelle Vardelle, FASM, TSS HoF, Editor-in-Chief, Journal of Thermal Spray Technology 5/19/21
Exploring the Future of the Transportation Industry: From Electric Vehicles to Automated Controls
Sponsored by: Linde & UPC-Marathon • Presented by: Steve Mueller and Eric Jossart 5/13/21
Elevate your Inspection Workflow: Digital, Consistent, and Traceable
Sponsored by: Leica Microsystems • Presented by: Nick Baker 5/4/21
How Effective is 2D DIC in Materials Testing?
Sponsored by: Zwick/Roell • Presented by: Fadi Abu-Farha 4/27/21
TSS Open Mic Series: Cold Spray: The Journey Began Around 25 Years Ago, Where Are We Now?
Sponsored by: TSS • Presented by: Rocco Lupoi 4/21/21
New Features for Improved Performance of Instrumental Gas Analyzers
Sponsored by: HORIBA Scientific • Presented by: Matthieu Chausseau 4/20/21
Material Solutions to Meet the Requirements of Electrical and Electronic Connectors
Sponsored by: Materion • Presented by: Mike Gedeon 4/15/21
The Business and Scientific Value of Artificial Intelligence in R&D of New Materials
Sponsored by: Citrine Informatics • Presented by: Raphael Stargrove 4/08/21
How to Easily Prepare Micro Targets for Electron Microscopy Analysis
Sponsored by: Leica Microsystems • Presented by: Andrew Lawson 4/06/21
Recent Advances in Automated Scanning Electron Microscopy (CCSEM) and its Application to Study Steel Inclusion Content
Sponsored by: TESCAN • Presented by: Scott Story, Gary S. Casuccio, and Jack Mershon 3/31/21
A Novel SEM-EDS Approach for Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Roger Maddalena and Alice Scarpellini 3/30/21
Automatic Sample Preparation of Stainless Steels for Microstructural Analysis
Sponsored by: Struers, Inc.• Presented by: Kelsey Torboli 3/25/21
TSS Open Mic Series: From Brazil to Stony Brook (USA) and then NRC (Canada): Professional Life Lessons in Thermal Spraying
Sponsored by: TSS • Presented by: Dr. Rogerio Lima 3/17/21
Using Diffraction-contrast Electron Microscopy to Elucidate Dislocation Pathways in Refractory Multi-principal Element Alloys
Sponsored by: Thermo Fisher Scientific • Presented by: Dr. Fulin Wang and Prof. Daniel S. Gianola 3/11/21
Building a Support Network from the Ground Up
Sponsored by: IDEA Committee • Presented by: Vanessa Raquel Raponi 2/25/21
Breakthrough of a New Thermal Spray Technology: Quo Vadis Suspension Spraying?
Sponsored by: TSS • Presented by: Dr. Filofteia-Laura Toma 2/17/21
High Volume and Highly Automated Sample Preparation
Sponsored by: Struers, Inc. • Presented by: Kelsey Torboli 1/26/21
Five Expert Tips for Optimal Nonferrous Melt Control with Spark OES
Sponsored by: Hitachi • Presented by: Jochen Meurs 1/21/21
TSS Open Mic Series: Industrial Gas Turbine (IGT) and Thermal Spray Technology—A Personal Perspective
Sponsored by: TSS • Presented by: Dr. Yuk-Chiu Lau, ASM TSS Hall of Fame Inductee 1/20/21
2020 Webinars
TSS Open Mic Series Session 2
Sponsored by: TSS • Presented by: Dr. Sanjay Sampath, FASM 12/16/20
Materials Selection and Design Considerations for Heavily Loaded Bearings
Sponsored by: Materion • Presented by: Dave Krus 12/16/20
Metallography of Alloy Biomaterial Hip Implants
Sponsored by: Struers Inc. • Presented by: Kelsey Torboli 12/15/20
Electron Microscopy Solutions for Metal Additive Manufacturing Qualification
Sponsored by: Thermo Fisher Scientific • Presented by: Mark Aindow and Rainer Hebert 12/03/20
Preparing an Effective ASM Award Nomination
Sponsored by: ASM Awards Committee • Presented by: Christine Hoover, Tim Rupert & Elizabeth Hoffman 12/01/20
Learning from Experience so that Bumps in the Road can be Navigated
Sponsored by: TSS • Presented by: Dr. Christopher Berndt, FASM 11/18/20
Unraveling the Morphology and Elemental Distribution of Nanoporous Refractory Metals via TEM Tomography
Sponsored by: Thermo Fisher Scientifc • Presented by: Maria Kosmidou 11/19/20
How to Create a Welcoming Technical Workspace: Stories and Personal Experiences
Sponsored by: ASM IDEA Committee • Presented by: Dr. Danielle Cote 11/12/20
ASM World Class Speaker Series Matilda McAleenan of McLaren Racing
Sponsored by: ASM Ontario Chapter • Presented by: Matilda McAleenan 10/26/20
Novel Applications of Advanced Electron Microscopy Techniques in Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Philip Withers and Ali Gholina 09/29/20
Digital Image Correlation in Support of Complex Testing of Advanced Materials
Sponsored by: Zwick/Roell • Presented by: Fadi Abu-Farha 09/30/20
Novel Applications of Advanced Electron Microscopy Techniques in Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Philip Withers and Ali Gholina 09/29/20
ASM Materials Platform for Data Science – Success Stories: High Temperature Oxidation – Inconel 625
Sponsored by: ASM International • Presented by: Ray Fryan 09/28/20
Isotropic Aluminum Composites for High Stability & Lightweight Applications
Sponsored by: Materion • Presented by: Andrew Tarrant 09/24/20
Materialography as a Quality Control Tool
Sponsored by: Struers Inc. • Presented by: James Silvester 09/22/20
Nodular, Grey and CGI Iron: An Image Analysis Perspective
Sponsored by: Clemex • Presented by: Marc Lavallee 08/27/20
Getting a Seat at the Table as a Materials Researcher: Tips on How to become a Science & Technology Policy Fellow
Presented by: AAAS • Dr. Elizabeth Boatman, Dr. Ticora Jones, Dr. Marcius Extavour 08/13/20
Thermal-Structural Materials Solutions for Heat Management in Electronic Device
Sponsored by: Materion • Presented by: Anand Samant 08/06/20
Coatings: An Image Analysis Perspective
Sponsored by: Clemex • Presented by: Marc Lavelle on 07/30/20
Fractography and Fracture Analysis: History and Development
Sponsored by: ASM International • Presented by: Larry Hanke and Daniel Grice on 07/28/20
Material Considerations for Electrical Contacts in High Reliability Medical Connectors
Sponsored by: Materion • Presented by: Mike Gideon on 07/09/20
Advanced Specimen Preparation for Metallography
Sponsored by: ASM International • Presented by: Larry Hanke & Dieter Scholtz on 07/07/20
New Capabilities in Metals Failure Analysis and Interface Characterization
Sponsored by: Thermo Fisher Scientific • Presented by: Herman Lemmens on 07/01/20
Chemical Micro Analyzer LIBS: Quick Element Analysis at Micrometer Scale
Sponsored by: Leica Microsystems • Presented by: Dr. Alessandra Forcucci on 06/30/20
How Failure Analysis is Impacted by Additive Manufacturing
Sponsored by: Knovel • Presented by: Dr. Daniel P. Dennies, FASM on 06/24/20
Grain Size: Then and Now
Sponsored by: Clemex • Presented by: Marc Lavelle on 06/23/20
How to Conduct Standard-Compliant Analysis of Non-Metallic Inclusions in Steel
Sponsored by: Leica Microsystems • Presented by: Dr. Alessandra Forcucci on 06/16/20
Advanced Software Features in Optical Emission Spectrometers (OES) for Foundry 4.0
Sponsored by: Hitachi High-Tech Analytical • Presented by: Wilhelm Sanders on 05/28/20
Advancements and Applications for Measuring Residual Stress via X-ray Diffraction
Sponsored by: Stresstech • Presented by: Wade Gubbels and James Thomas on 05/20/20
Introduction to the Metallurgy of Precipitation Hardening Stainless Steels
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM on 05/19/20
Making Challenging Edge Break Measurements Easy
Sponsored by: 4D Technology: An Onto Innovation Business • Presented by: Dr. Erik Novak and Kramer Lindell on 05/14/20
Vacuum for Your Industrial Process: Creating, Measuring, and Maintaining for Optimal Performance
Sponsored by: Agilent • Presented by: John McLaren and John Screech on 04/30/20
Introduction to the Metallurgy of Austenitic Stainless Steels
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM on 04/28/20
Take Your Multi-Modal Materials Characterization Further with the Latest Plasma FIB-SEM
Sponsored by: TESCAN • Presented by: Dean Miller, Ph.D. on 04/16/20
Maximize Member Benefits with the ASM Digital Library
Sponsored by: ASM International • Presented by: Nate Bulcroft on 04/02/20
Discovering Titanium’s Unique Properties by Examining Metallurgy and Microstructures
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dannies, FASM on 03/31/20
Metal Additive Manufacturing—3D Printing: Technologies, Opportunities, and Materials Testing
Sponsored by: Zwick/Roell • Presented by: Michael Goehring and Ajay Krishnan on 03/26/20
New Frontiers in Analytical Metallography
Sponsored by: ZEISS • Presented by: Andy Holwell on 03/19/20
2019 Webinars
Analysis of Welded Joint in High Volume Manufacturing
Sponsored by: Struers, Inc. • Presented by: Kelsey Torboli
Improving the Throughput of Volume Scan Diagnosis by 10X using Dynamic Partitioning
Sponsored by: Mentor, A Siemens Business • Presented by: Jayant D’Souza
Ensuring Fitness for Purpose of Additive Manufactured Parts using X-Ray Micro-CT
Sponsored by: Nikon • Presented by: Andrew Ramsey
Opportunities for Time-Resolved Dynamic CT Imaging in the Laboratory
Sponsored by: TESCAN, USA • Presented by: Luke Hunter
Engineering Your Dream Career: Becoming the Expert and the Boss
Sponsored by: ASM Women in Materials Engineering Committee • Presented by: Jacqueline Earle, Beth Snipes
Mechanical Testing Challenges in the Automotive Industry: Achieving Reliable Results
Sponsored by: Zwick/Roell • Presented by: Aleksander Koprivc and David Philips
Ensure 100% PMI without Incurring Significant Additional Costs
Sponsored by: Hitachi High-Tech Analytical Science • Presented by: Marianne Walters
Residual Stress Determination via X-ray Diffraction: A Tool for Control, Validation, and Development
Sponsored by: Stresstech • Presented by: James Thomas and Wade Gubbles
Xe+ PFIB Specimen Preparation for S/TEM Imaging
Sponsored by: TESCAN, USA • Presented by: Lucille A. Giannuzzi, Ph.D.
Nodularity Measurement Using Image Analysis and Its Correlation with Mechanical Properties of Ductile Iron
Sponsored by: Struers • Presented by: Henry Udomon
How Additive Manufacturing Affects Failure Analysis
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM
3D Materials Science and Mechanical Serial Sectioning for Microstructural Characterization
Sponsored by: UES, Inc. and Sandia National Laboratories • Presented by: Dr. Thomas Ivanoff
Advanced Powder Characterization for 3D Printing
Sponsored by: NSL Analytical • Presented by: Dr. Dave van der Wiel
Failure Analysis and Engineering Design Challenges of Additive Manufacturing
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM
Annealing Atmospheres: Key Control Variables & Gas Supply Systems
Sponsored by: Praxair Inc. & United Process Controls Inc. • Presented by: Steve Mueller and Eric Jossart
Sample Preparation Tips for Surface Hardened Gears
Sponsored by: Struers Inc. • Presented by: Kelsey Torboli
Using Automated Micrograph Analysis to Save Time and Costs
Sponsored by: MIPAR Software • Presented by: Dr. John Sosa
Identifying Organic Contaminants with Breakthrough Submicron IR and Simultaneous Raman Microscopy
Sponsored by: Photothermal Spectroscopy Corp. • Presented by: Dr. Mustafa Kansiz and Dr. Dennis Walls
Simple Solutions for Common Induction Heating Challenges: Lessons Learned
Sponsored by: Inductoheat • Presented by: Dr. Valery Rudnev, FASM, IFHTSE Fellow
2018 Webinars
How to Monitor Metalworking Fluids for Heat Treating and Other Applications
Sponsored by: Houghton International • Presented by: Jackie Walker and Chuck Faulkner
Best Practices for Leak Testing Large Vacuum Chambers
Sponsored by: Agilent Technologies • Presented by: John McLaren
New Tools to Accelerate Silicon Debug and Bring-Up
Sponsored by: Mentor, a Siemens Business and Teradyne Inc. • Presented by: Matthew Knowles and Marc Hutner
Fundamentals of Helium Leak Detection
Sponsored by: Agilent Technologies • Presented by: John McLaren
Understanding the Microstructure of Stainless Steel
Sponsored by: Stuers Inc. • Presented by: George Vander Voort
Improving Metal Additive Manufacturing with Integrated Materials Modeling
Sponsored by: Thermo-Calc Software • Presented by: Adam Hope
Using Automated SEM/EDS to Monitor Particulates for Automotive Component Cleanliness
Sponsored by: ThermoFisher Scientific • Presented by: Vishal Patel and Lev Pekarsky
Improving Your Vacuum Heat Treating with Industrial Gases and Process Control Systems
Sponsored by: Praxair and United Process Controls • Presented by: Patrick Diggins and Pat Torok
How to Measure Inclusions: Methods and Recommendations
Sponsored by: Struers Inc. • Presented by: George Vander Voort
Understanding Grain Size measurement
Sponsored by: Struers Inc. • Presented by: George Vander Voort