C.I. Hayes Solitaire conveyor belt furnace designed for annealing of small parts
January 20, 2017
Source:
C.I. Hayes, a Gasbarre Furnace Group company, Cranston, R.I., recently installed multiple Solitaire conveyor belt furnaces for annealing of precious metals for the jewelry industry. In total, this project consisted of three identical conveyor belt furnaces, all manufactured and installed for the same customer.
Named for its compact design, and initially developed for brazing and bright annealing of jewelry pieces, the Solitaire conveyor belt furnace has found great acceptance in other markets requiring brazing and bright annealing of small intricate parts.
C.I. Hayes continues to enhance the proven design of its Solitaire furnace line by improving the overall lifetime value. Its robust and simple design allows for ease of manufacture, installation, and maintenance, ensuring success for processes that are driven by both technical and commercial demands.
The Solitaire is equipped with belt widths of 6 to 12 inches and effective heat lengths of 27 to 72 inches. Four-sided heat surrounding the muffle provides excellent uniformity and power input with temperature capabilities to 2100°F (1148°C). The furnace remains compact and may be shipped as a single piece, fully assembled, with single point connections for power, water, and atmosphere.
C.I. Hayes designs, manufactures and services industrial vacuum and atmosphere heat treating equipment and has been delivering custom solutions to the heat treating industry for 112 years.
www.cihayes.com
C.I. Hayes, a Gasbarre Furnace Group company, Cranston, R.I., recently installed multiple Solitaire conveyor belt furnaces for annealing of precious metals for the jewelry industry.
Continue reading
Meridian partners with U.K. university for new magnesium manufacturing methods
January 17, 2017
Source:
Meridian Lightweight Technologies, Plymouth, Mich., announces that Birmingham City University, England, has signed an exclusive partnership with Meridian, the world's largest producer of magnesium components, to showcase magnesium as a viable alternative for luxury car makers and the aerospace industry. The two organizations will work together in the education, research, and development of magnesium automotive applications.
Meridian's Nottinghamshire plant produces around 5000 net metric tons of die-cast products annually, serving automotive clients such as Jaguar, Land Rover, BMW, Ford, Honda, and Volvo.
However, being able to offer custom magnesium components for low-volume manufacturers such as Aston Martin, Bentley and Rolls-Royce, can prove costly with current manufacturing methods.
As part of the new partnership with Meridian, academics from Birmingham City University's Faculty of Computing, Engineering and The Built Environment, and personnel from the company will be investigating new ways to offer more sustainable goods for low-volume manufacturers, while making production financially viable for Meridian and its potential clients.
"The strategic partnership we have signed with Birmingham City University is very much a first for us," says Meridian's Randy Chalmers. "As one the world's leading suppliers of innovative, lightweight cast metal solutions for the transportation industry, it is imperative that we remain at the forefront of the machining and casting capabilities of magnesium. Our partnership with Birmingham City University will certainly catalyze this, allowing us to benefit from its leading-edge research in the field, and ensuring that the next generation of engineers continues to experiment with new ways to utilize the metal."
For more information: Matt Height [email protected]
Meridian Lightweight Technologies, Plymouth, Mich., announces that Birmingham City University, England, has signed an exclusive partnership with Meridian, the world’s largest producer of magnesium components, to showcase magnesium as a viable alternative for luxury car makers and the aerospace industry.
Continue reading
3D optical microscope provides high combined lateral and vertical resolution
Source:
Bruker Corp., Billerica, Mass., reports that its Contour Elite 3D optical microscopes provide the high sensitivity and stability necessary for precision 3D surface measurements in applications and environments that are challenging for other metrology systems, such as R&D applications within the semiconductor and MEMS markets. Critical metrology includes measurements of film thickness and substrate roughness, as well as monitoring and validating key dimensional parameters such as RA roughness, pitch, width, and height.
Contour Elite systems are said to provide the best combined lateral and vertical resolution over the industry's largest field of view, with a sub-nanometer to greater than 10 mm vertical range. They also include high-fidelity imaging that reveals specific surface details—minute details that otherwise would be difficult or impossible to see.
Data segmentation based on color or grayscale information enables users to rapidly select areas of interest and collect critical metrology data from specific regions. This, combined with the ability to build a vivid graphic representation of a magnified zoom into the part, gives the user the ability to actually see the sample along with its true 3D topography, leading to better problem solving in engineered surface applications.
Because of its very high speed, Contour Elite's WLI technology is particularly well-suited as a QC/process monitoring tool where production volumes are pushed to ever higher levels. This latest generation of Contour 3D optical microscopes delivers a powerful combination of high-speed operation, an ability to function in factory environments, and uncommon accuracy making the Elite systems ideal for challenging applications that require critical surface inspections in the semiconductor and MEMS industrial markets.
www.bruker.com
Bruker Corp., Billerica, Mass., reports that its Contour Elite 3D optical microscopes provide the high sensitivity and stability necessary for precision 3D surface measurements in applications and environments that are challenging for other metrology systems, such as R&D applications within the semiconductor and MEMS markets.
Continue reading
Ultralight auto door made of aluminum, polymers, and electronic latch system
Source:
Magna International Inc., Troy, Mich., in cooperation with the U.S. Department of Energy and partners FCA US and Grupo Antolin, announces that the team has developed an ultralight door that achieves the project objective of 42.5% mass savings over an average current production door. This was developed in less than ten months, while keeping the cost within accepted industry parameters and providing a solution that applies to approximately 70% of the light vehicle market.
Magna built on its know-how from the development of the Multi-Material Lightweight Vehicle (MMLV) with the DOE and Ford in 2014, and took it a step further in creating a solution for this advanced ultralight door project.
A key innovation includes integration of Magna's SmartLatch electronic latch system. This eliminated the need for mechanical hardware and enabled the development of a unique carrier module with integrated glass guides and lift capability of a lightweight hybrid glass laminate, an industry first.
The door-in-white assembly makes extensive use of aluminum, which achieves approximately half of the total mass reduction of the door assembly. Overall, the project makes use of materials readily available today that can easily be made using existing manufacturing processes, without a significant increase in production costs or changes in body-shop infrastructure.
Grupo Antolin contributed its know-how in the design and manufacture of interior trim components to contribute to the significant mass reduction. The application of advanced molding technologies and polymers contributed approximately 7% to the total mass reduction.
The ultralight door development included intensive simulation efforts, passing all safety and durability testing in the process. The next steps include manufacturing full-scale prototype door assemblies, performance tests and safety tests to validate the design, with the goal of being available for use in production vehicles by the fall of 2020.
www.magna.com
Magna International Inc., Troy, Mich., in cooperation with the U.S. Department of Energy and partners FCA US and Grupo Antolin, announces that the team has developed an ultralight auto door that achieves the project objective of 42.5% mass savings over an average current production door.
Continue reading
One Minute Mentor: Radio-Frequency Plasma
January 16, 2017
Source:
Glow-discharge plasma nitriding is carried out in nitrogen-hydrogen atmospheres at pressures in the range of 100 to 1000. At pressures below 10 Pa, the glow-discharge technique is not used, but plasma can still be generated by radio-frequency (RF) excitation, microwave energy, or electrons produced by a heated filament. These low-pressure plasmas diffuse through the treatment chamber with a large number of active species, which increases the nitriding efficiency. The uncoupling of plasma generation from the part being treated allows independent control of the energy and flux of ions against the substrate surface, and the temperature can be kept low.
In the RF plasma process, plasma is generated by high frequency, in the range of 13.56 MHz, is applied to an inductive antenna inside the vacuum chamber. The part is heated by heating the chamber and the working table with standard electrical resistance. One of the limiting factors for the commercial exploitation of the process is the high vacuum required, and the subsequent cost. The diagram shows a schematic of RF plasma equipment.
Volume 4D, Heat Treating of Irons and Steels ⇒ Nitriding of Stainless Steels ⇒ Thermochemical Nitriding Treatments
Glow-discharge plasma nitriding is carried out in nitrogen-hydrogen atmospheres at pressures in the range of 100 to 1000. At pressures below 10 Pa, the glow-discharge technique is not used, but plasma can still be generated by radio-frequency (RF) excitation, microwave energy, or electrons produced by a heated filament.
Continue reading
NIST awards $12 million to MEP centers in 11 states to support manufacturers
January 15, 2017
Source:
The National Institute of Standards and Technology, Gaithersburg, Md., announces that its Hollings Manufacturing Extension Partnership (MEP) program has awarded a total of nearly $12 million in first-year funding to 11 organizations that will operate MEP centers in Delaware, Hawaii, Iowa, Kansas, Maine, Mississippi, Nevada, New Mexico, North Dakota, South Carolina, and Wyoming.
MEP centers in all 50 states and Puerto Rico support small and medium-size manufacturers and are dedicated to enhancing the productivity and technological performance of U.S. manufacturing. The agreements have five-year periods of performance that begin April 1, 2017, and they will provide nearly $60 million in total funding during that time.
The following organizations will sign cooperative agreements to operate MEP centers:
Delaware Technical Community College (Newark) - $500,000
High Technology Development Corporation (Honolulu, Hawaii) - $500,000
Iowa State University of Science & Technology (Ames) - $1,859,206
Mid-America Manufacturing Technology Center (Overland Park, Kansas) - $1,864,950
Maine Manufacturing Extension Partnership (Augusta) - $863,522
Mississippi Manufacturers Association (Jackson) - $1,003,782
Board of Regents, Nevada System of Higher Education, University of Nevada-Reno - $756,001
New Mexico Manufacturing Extension Partnership (Albuquerque) - $1,360,802
The Dakota Manufacturing Extension Partnership Inc. (Bismarck, North Dakota) - $500,000
South Carolina Manufacturing Extension Partnership (Columbia) - $2,268,003
University of Wyoming (Laramie) - $500,000
https://www.nist.gov/mep
The National Institute of Standards and Technology, Gaithersburg, Md., announces that its Hollings Manufacturing Extension Partnership (MEP) program has awarded a total of nearly $12 million in first-year funding to 11 organizations that will operate MEP centers in Delaware, Hawaii, Iowa, Kansas, Maine, Mississippi, Nevada, New Mexico, North Dakota, South Carolina, and Wyoming.
Continue reading
Heat treating conference/exhibition in England
January 13, 2017
Source:
The UK's Contract Heat Treatment Association will again be partnering with the Surface Engineering Association and Wolfson Heat Treatment Centre in co-sponsoring the second "Surface Engineering & Heat Treatment Industry Conference/Exhibition" on October 13.
Meet your fellow industrialists, share experiences and discuss issues that you want your association to address. Members of the SEA National Committee and the CHTA Management Committee will be present throughout the conerence as will suppliers to our industry sector in the table top exhibition area. Tap into our knowledge and come and learn from the experiences of others. (Photo courtesy Heat Treatment Northampton)
Staged in England's historic Kenilworth, initial information about the event can be found at www.sea.org.uk/events/index.htm/surface-engineering-heat-treatment-industry-conference-2017. Offers of presentations on advances in industrial heat treatment processing will be welcomed by CHTA's Alan J Hick at [email protected].
The UK’s Contract Heat Treatment Association will again be partnering with the Surface Engineering Association and Wolfson Heat Treatment Centre in co-sponsoring the second “Surface Engineering & Heat Treatment Industry Conference/Exhibition” on October 13.
Continue reading
Sandvik announces new Additive Manufacturing business
Source:
Sandvik Group, Sweden, announces that a new Product Area called Additive Manufacturing will be formed within Sandvik Machining Solutions. The foundation for the new Product Area is the current Additive Manufacturing center in Sandviken, Sweden, which today is part of R&D at Product Area Sandvik Coromant.
With this change, additive manufacturing within Sandvik is moving from a mainly internal purpose into an external business of metal additive manufacturing.
The business will have full profit and loss responsibility and will step-by-step take a position on the market by organically growing as well as through acquisitions. In addition, the additive manufacturing and development performed for internal purposes in cooperation with the other Product Areas within Sandvik Machining Solutions will continue.
Sandvik Group, Sweden, announces that a new Product Area called Additive Manufacturing will be formed within Sandvik Machining Solutions.
Continue reading
Questek to develop titanium, aluminum, steel alloys for military AM parts
Source:
Questek Innovations LLC, Evanston, Ill., was recently awarded six separate projects from the U.S. Navy and U.S. Army to develop technologies and design new alloys specifically tailored to the unique processing conditions and materials-related challenges of additive manufacturing. These include one Small Business Innovation Research (SBIR) Phase II project, two SBIR Phase I projects, and three Small Business Technology Transfer (STTR) Phase I projects focused on aluminum, titanium, and steel systems. The combined funding contract value exceeds $2 million.
"A materials-based approach to addressing the challenges of additive manufacturing is crucial for accelerating the development of this technology and achieving, or even surpassing, the performance of traditionally-processed alloys," says ASM Fellow Aziz Asphahani, Questek's Chief Executive Officer. "We look forward to the outcomes of these projects, and the prospect of adopting ICME-designed alloys as the first-generation, high-performance additive manufacturing materials."
The awarded projects include the following:
Under an Office of Naval Research (ONR)-funded Phase II SBIR project (Topic N141-062) titled "Computational Design of Aluminum Alloys for use in Additive Manufacturing," Questek is furthering the development of three Questek-designed aluminum alloys specifically for processing by Direct Metal Laser Sintering AM. The goal of this program is to combine AlSiMg alloys, which can be printed without cracking but have low strength, with the 6061/7050 alloys, which have high strength but which crack during additive manufacturing. corrosion tests.
Under a U.S. Navy Phase I STTR project (Topic N16A-007) titled "Optimized High Performance Stainless Steel Powder for Additive Manufacturing," Questek is developing a new powder specification for high-strength martensitic precipitation-hardenable 17-4 stainless steel, optimized specifically for selective laser melting (SLM) technologies.
Under an ONR-funded Phase I STTR project (Topic N16A-022) titled "Integrated Computational Material Engineering Tool Set for Additive Manufacturing of Stainless Steel (316L)," Questek is developing an "Integrated Model Toolkit" that enables the modeling of AM process by predicting local composition, microstructure, residual stresses, defects, and mechanical properties for stainless steel 316L aerospace components.
Under a U.S. Army Phase I SBIR project (Topic A15-104) titled "Application of ICME to Optimize Processing of State-of-the-art Gear Steels in Additive Manufacturing," Questek atomized, built via LENS and DMLS AM processes and evaluated its high-performance carburizable Ferrium® C64® steel.
Under an ONR-funded Phase I SBIR project (Topic N161-071) titled "Additive Manufacturing Development of Naval Platform Heat Exchangers," Questek is extending its ICME tools to evaluate materials for the DMLS production of heat exchangers. The project includes fabrication of test specimens to address one of the unique challenges to AM of heat exchangers: minimum component thickness.
Under a U.S. Navy Phase I STTR project (Topic N16A-004) titled "Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation," Questek is extending the Accelerated Insertion of Materials framework for managing the uncertainty of material properties to the mechanical performance of laser power bed additively manufactured Ti-6Al-4V materials.
www.questek.com
Questek Innovations LLC, Evanston, Ill., was recently awarded six separate projects from the U.S. Navy and U.S. Army to develop technologies and design new alloys specifically tailored to the unique processing conditions and material-related challenges of additive manufacturing.
Continue reading
Dual chamber furnace designed for heat treating high-speed steels
Source:
Lucifer Furnaces Inc., Warrington, Pa., has delivered a dual-chamber furnace built with 12-gauge sheet steel and reinforced throughout, designed for heat treating high-speed steels. The HS8 furnace heats to 2450°F in the upper chamber, and has silicon carbide heating elements mounted across the roof and below the hearth. Elements are a solid bar type with termination connections for easy service via removable covers on both sides of the furnace.
The upper chambers of these high temp furnaces are insulated with 6.5 inches of combined ceramic fiber hot face and mineral wool cold face insulation for lower power demand, with staggered seams to block direct heat flow to minimize outer shell temperature.
The lower chamber is a recirculating oven reaching up to 1600°F with a high volume rear-mounted fan directing air flow horizontally through the chamber for temperature uniformity. A stainless-steel liner isolates the coiled heating elements from the workload. Heating elements are mounted in removable holders for easy replacement. Lower chamber insulation consists of multilayered lightweight insulating firebrick hotface and mineral wool backup, dry fit to allow for thermal expansion.
The double pivot horizontal swing door on the upper chamber and lower chamber horizontal swing door are both insulated and secured with cam locks for a tight seal. Safety switches shut off power when doors open. Temperature sensing in the upper chamber is achieved with a type R platinum thermocouple for fast, accurate response and extended life at elevated temperatures; the lower chamber is standard with a type K thermocouple. Standard controls, mounted in a side mounted NEMA 1 panel, include a Honeywell DC2500 time proportioning controller for each chamber as well as an SCR power supply for the upper chamber to regulate power demand for steady state control, an alternative to tap switches.
This furnace, model HS82-M24 with inside chamber dimensions of 12 x 12 x 24 inches, will be used at a large corporation in a newly built tool room.
www.luciferfurnaces.com
Lucifer Furnaces Inc., Warrington, Pa., has delivered a dual chamber furnace built with 12-gauge sheet steel and reinforced throughout, designed for heat treating high-speed steels.
Continue reading 