Seco/Warwick delivers Vector vacuum furnace to revolver manufacturer

August 2, 2023
Source: ASM International

Seco/Warwick delivers Vector vacuum furnace to revolver manufacturer

Seco/Warwick, Meadville, Pa.,  received another order for the supply of a Vector vacuum furnace to a South American international manufacturer of weapons and military equipment. The furnace will process various components including barrels, reels, locks, and firearm magazines, which are expected to be reliable, of the highest quality, and perform with outstanding resistance to negative external conditions.

This will be the second solution of this type in the South American defense industry leader’s internal hardening plant. It is a single-chamber gas-cooled vacuum furnace which can be used for a variety of metal heat treatment processes and applications. This solution has been adapted to the customer’s requirements so that it is as effective as possible at delivering the precision heat treatment results required for quality weaponry.

Thanks to the large working space (900x900x1200 mm), the Vector system is designed to process quite large elements. A characteristic feature of the design is convection heating, which improves heat transfer efficiency when heating at lower temperatures, and directional cooling, which enables differentiated cooling of problematic parts in terms of shapes.

Read further here

Constellium to sell three german extrusion plants to Vaessen Aluminium


Source: ASM International

Constellium to sell three german extrusion plants to Vaessen Aluminium

Constellium, Paris,  announced that it signed a binding agreement with Vaessen Aluminium for the sale of three of Constellium’s soft alloy extrusion facilities located in Landau, Crailsheim and Burg in Germany for a total cash consideration of €48.8 million.

With nearly 450 employees, the three Constellium plants specialize in soft alloy extruded products for the Building & Construction, Transportation and Industry markets in Europe.

Vaessen Aluminium belongs to a longstanding family-owned industrial group, headquartered in Belgium, active in aluminum billets and profiles (E-Max), in lighting and ceiling (Kreon) and in wall cladding (Limeparts Drooghmans).

The transaction is expected to close in the second half of 2023 and is subject to customary closing conditions and regulatory approval.

Read further here.

Lehigh’s summer engineering institute students tour Solar Atmospheres


Source: ASM International

Lehigh’s summer engineering institute students tour Solar Atmospheres

Solar Atmospheres, Souderton, Pa., hosted over 40 high school students enrolled in the Summer Engineering Institute (SEI) at Lehigh University. The SEI program, under the guidance of Director Dr. Laura Moyer, is a two-week residential program, running two sessions back to back. 

Students are nominated by faculty of local high schools, and the program specifically targets under-represented groups including girls, first-generation students, and students who might otherwise have limited opportunities to study in the fields of science, technology, engineering, and math (STEM).

Solar Atmospheres provided a tour of the campus, exhibiting materials and processes for intriguing applications in a variety of markets. The students experienced a manufacturing setting encompassing related topics from their curriculum, gaining a better understanding of heat treating and manufacturing, and how cutting edge technology reshapes centuries-old processes.

Read further here.

Nitrex provides nitrocarburizing system to New Zealand heat treater


Source: ASM International

Nitrex provides nitrocarburizing system to New Zealand heat treater

Nitrex, Quebec, has announced that they have provided a nitrocarburizing system to Heat Treatments, a leading provider of commercial heat treatment services in New Zealand and one of Nitrex’s earliest customers.

Heat Treatments’ partnership with Nitrex dates to 1992 when they purchased its first Nitrex system with Nitreg nitriding capabilities. As operations grew, the company later added a second system in 2004 for nitrocarburizing and post-oxidation treatments. Contrary to the first two systems, which are identical pit furnaces, the latest addition, an NXK series, features the furnace and control panel mounted on an integral platform. Delivery, installation, and startup time and costs are reduced with this design. The NXK-812 model is designed to treat workloads weighing up to 1200 kg, with a diameter of 800 mm (31.5″) and a height of 1200 mm (47.25″). The system is equipped with advanced process technologies, including Nitreg-C controlled nitrocarburizing and ONC post-oxidation, which provide precise control and consistent results.

https://www.nitrex.com/

One Minute Mentor: Horizontal Retort Furnace

June 14, 2023
Source: ASM International

One Minute Mentor: Horizontal Retort Furnace

Gas nitriding and nitrocarburizing processes can be processed with fixed gasifying amounts of ammonia, nitrogen, and, for nitrocarburizing, a carburizing and oxidizing agent. However, this does not produce consistent results if different load surfaces are treated with the same fixed gasifying amounts. Furthermore, especially for nitriding processes, the ammonia gasifying has to be reduced or diluted with nitrogen after several hours because the nitrogen uptake of a load decreases. Another quite popular method, usually called the “Floe process,” is a two-step nitriding, where two different nitriding temperatures and different gas flows allow adjustment of the nitriding potential (KN) to the requirements.

Therefore, modern gas nitriding and nitrocarburizing furnaces are equipped with sensor systems and a process control unit that allow the measurement and automatic control of the nitriding potential (KN). The figure shows a schematic of a typical horizontal retort furnace. Similar to the vertical execution, a good circulation of the process gas is needed to get uniform results, which can be reached by the use of a muffle and a high circulation rate. Indirect cooling is performed with an external cooling fan, blowing cold air along the retort. 

For more information, click on the link below (subscription required). Then scroll to Figure 24

R Schneider; R. Mesquita; H. Altena; T. Müller; P. Seemann, Processes and Furnace Equipment for Heat Treating of Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958

Solar Atmospheres of California adds Airbus approval


Source: ASM International

Solar Atmospheres of California adds Airbus approval

Solar Atmospheres, Fontana, Calif., has announced that they are now Airbus approved for heat treating.

Frank Trujillo, director of Sales for Solar Atmospheres of California, stated that, “Many Airbus suppliers were in need of a heat treater in the West that could process parts, plates and bars in support of increased Airbus production rates. SCA is proud to be a partner on the Airbus Team!”

With our wide range of furnaces, we are capable of processing very small pieces or loads of 50,000 pounds and up to 24 feet in length. This approval will translate into improved lead-times and greater efficiencies for all Airbus suppliers that require heat treat services in the Western Region.

Read further here.

 

Nitrex installs nitriding system at Akademi Metalurji


Source: ASM International

Nitrex installs nitriding system at Akademi Metalurji

Nitrex Vacuum, Quebec, has installed a turnkey nitriding system at Akademi Metalurji, a full-service commercial heat-treating solutions provider located in Turkey. The project includes a mid-sized pit-type furnace, advanced controls, three process technologies along with accelerated cooling. 

The decision to invest in a new nitriding system was driven by the company’s objective to overcome efficiency and quality challenges faced with their previous furnace at the Gebze facility. The prior system consumed excessive amounts of process gases and yielded inconsistent nitriding results. With the addition of a Nitrex NX-1015 pit furnace, Akademi Metalurji can now save on process gases and production time, while also expanding their heat treatment capabilities to accommodate wider-dimensioned parts. The nitriding furnace offers an effective work zone of 39” diameter by 59” high (1000 x 1500 mm) and can handle a load of up to 4400 lbs. (2000 kg). The supplied library of Nitreg-based recipes is tailored to meet different application requirements, resulting in a hardened surface that is highly wear-resistant. For applications like machinery components, tooling, dies, and molds, where Akademi Metalurji specializes, Nitreg delivers improved tooling performance, ensuring longer service life and higher throughput. Ultimately, this leads to tool cost savings for their customers.

The system was successfully installed at the Gebze facility, located southeast of Istanbul, and commenced operations in April 2023. Since then, it has been running smoothly, delivering excellent results.

Read further here.

Wisconsin Oven ships electrically heated horizontal quench system


Source: ASM International

Wisconsin Oven ships electrically heated horizontal quench system

Wisconsin Oven, East Troy, announced the shipment of an Electrically Heated Horizontal Quench System to a manufacturer of products for the automotive industry. This system will be used for the solution treatment of aluminum.

The maximum temperature for this horizontal quench furnace is 1200°F and interior chamber dimensions of 2′ wide x 2′ high x 2′ long. The system has the capacity to heat 450 pounds of aluminum parts and the steel basket within 60 minutes. Temperature uniformity of +/- 10°F at set points 850°F and 1050° F was verified with a nine point profile test prior to shipment.

This horizontal quench system provides a 15 second quench delay from when the door begins to open until the load is fully submerged in the tank. The quench is manual, where the operator pulls the load out of the oven and onto the quench elevator using a hook. The quench delay time is recorded and enforced using sensors to detect the start and end of the quench operation, and to stop the process if the quench delay time expires.

Read further here.

Quintus Technologies supplies high pressure Flexform press to airframe manufacturer


Source: ASM International

Quintus Technologies supplies high pressure Flexform press to airframe manufacturer

Quintus Technologies, Vasteras, Sweden, announced that they will supply a high pressure fluid cell press to France’s LAUAK Group, a Tier 1 supplier to the aerospace industry. The press will be installed at the LAUAK Aerostructures factory in Grandola, Portugal, in September 2023. 

Reaffirming its continued commitment to productivity enhancement, LAUAK selected the Quintus model QFC 0.7×1.8-800 press with high pressure technology to bolster its manufacturing efficiency. “The forming press is undoubtedly at the heart of sheet metal production,” says Mikel Charritton, LAUAK Group Managing Director. “Especially in the context of the current aerospace ramp-up, in particular the A320, A350, and B737 programs, LAUAK’s capital equipment investments are strongly influenced by the imperatives of competitiveness. This press significantly increases and secures our production capacity.” Quintus’s proprietary hydroforming process requires only one rigid tool half, an innovation that not only generates significant tool cost savings but also eliminates several forming operations, intermediate heat treatments, and operator dependencies. 

Read further here.

One Minute Mentor: Gas nitriding equipment

May 27, 2023
Source: ASM International

One Minute Mentor: Gas nitriding equipment

Gas nitriding and nitrocarburizing can be processed in horizontal or vertical chamber furnaces with refractory insulation. However, to allow a quick change of the atmosphere and to avoid influences resulting from previous processes in the same furnace, retort furnaces are preferred.

To enable an acceptable production capacity, large vertical retort furnaces are used. The figure is a schematic sketch of a vertical retort furnace with a compensator for sealing against the atmosphere. Nowadays large horizontal retort furnaces are also used. Horizontal retort furnaces of different size and execution are preferred for nitrocarburizing processes. Similar to the vertical execution, a good circulation of the process gas is needed to get uniform results, which can be reached by the use of a muffle and a high circulation rate. Indirect cooling is performed with an external cooling fan, blowing cold air along the retort. Other designs allow direct cooling of the process gas with an external heat exchanger.

For more information, click on the link below (subscription required). Then scroll to Figure 23

R Schneider; R. Mesquita; H. Altena; T. Müller; P. Seemann, Processes and Furnace Equipment for Heat Treating of Tool Steels, ASM International, 2014, https://doi.org/10.31399/asm.hb.v04d.a0005958