Bodycote joins energy industries council to expand engagement with global energy sector

April 3, 2025
Source: ASM International

Bodycote joins energy industries council to expand engagement with global energy sector

Bodycote, Macclesfield, UK, announced its membership with the Energy Industries Council (EIC), a leading global trade association for the energy sector. This move strengthens Bodycote’s strategic alignment with the evolving needs of the industry and reinforces its role as a provider of heat treatment and specialist thermal processing services across power generation and energy infrastructure markets.

Through its membership, Bodycote gains broader access to key industry stakeholders, enabling stronger supply chain collaboration and the pursuit of new business opportunities within the energy sector. The company serves a wide range of EIC members, fostering synergies that support innovation and operational excellence.

Bodycote’s engagement with the EIC supports its commitment to sustainability, particularly in nuclear and renewable energy markets. The partnership enhances customer access to Bodycote’s services via EIC platforms and events, further promoting solutions that improve performance, efficiency, and reliability in critical energy applications.

Read more

Solar Atmospheres expands vacuum heat-treating capacity in Eastern Pennsylvania


Source: ASM International

Solar Atmospheres expands vacuum heat-treating capacity in Eastern Pennsylvania

Solar Atmospheres, Souderton, PA, announced the commissioning of two additional 2-bar vacuum furnaces at its Eastern Pennsylvania facility. The expansion is aimed at supporting increased demand from the aerospace and industrial gas turbine industries, as well as specialized hydride/dehydride processing of reactive metals such as titanium, tantalum, and niobium.

The newly installed furnaces, manufactured by Solar Manufacturing, feature large working hot zones measuring 45 inches wide by 45 inches high by 72 inches deep. They are rated for temperatures up to 2400°F and maintain a temperature uniformity of ±10°F, meeting the stringent requirements of high-performance heat treatment applications.

Mike Moyer, vice president of sales at Solar Atmospheres, noted that the new equipment, outfitted with the latest control systems from Solar Manufacturing, enhances operational efficiency and safety. He added that this expansion supports the company’s commitment to providing reliable service, competitive pricing, and fast turnaround times to its customers.

The additional capacity reflects Solar Atmospheres’ ongoing investment in advanced thermal processing technology to meet the evolving needs of its industrial and aerospace clients.

Read further here

 

Kanthal wins e-prize for industrial heating electrification

November 30, 2024
Source: ASM International

Kanthal wins e-prize for industrial heating electrification

Kanthal, Amherst, NY, announced that it has been awarded the prestigious E-prize in the energy optimization category for its innovative technology supporting fossil-free industrial production. Organized by Sweden’s leading business newspaper Dagens Industri, Aktuell Hållbarhet, and the energy group E.ON, the E-prize recognizes groundbreaking advancements in energy innovation. This marks the 16th year the award has celebrated industry-leading solutions.

The jury highlighted Kanthal’s ability to combine a 90-year-old invention with modern innovation to replace natural gas with electric heating in high-temperature industrial processes. This transition enables fossil-free production, reducing emissions and improving working conditions. Kanthal was recognized as a global pioneer in sustainable industrial electrification, with applications ranging from steel production to manufacturing solar cells and batteries.

Robert Ståhl, president of Kanthal, noted the significance of the award, stating that the company’s technology allows industries such as steel, batteries, semiconductors, and glass to reduce emissions by transitioning to electricity for industrial heating. Nicolai Schaaf, sustainability manager at Kanthal, added that electrification not only reduces emissions but also supports the broader expansion of fossil-free energy management.

Kanthal’s technology, rooted in a 93-year-old innovation, is designed to electrify high-temperature processes across industries, eliminating CO2 emissions when powered by fossil-free electricity. These processes, integral to manufacturing sectors such as steel, aluminum, glass, and cement, account for a significant share of global industrial CO2 emissions, making Kanthal’s solutions critical for sustainable industrial transformation.

Read further here 

Solar atmospheres South Carolina facility earns approval from Parker Aerospace

November 4, 2024
Source: ASM International

Solar atmospheres South Carolina facility earns approval from Parker Aerospace

Solar Atmospheres, Greenville, SC, announced that its facility has received approval from Parker Aerospace, further expanding the company’s capabilities to meet aerospace industry demands. With this new certification, Solar Atmospheres now operates five locations capable of fulfilling Parker Aerospace’s specific thermal processing requirements.

Steve Prout, president of Solar Atmospheres’ Greenville site, highlighted the value this approval brings to customers in the Southeastern U.S., providing them with a local, efficient option for aerospace and defense thermal processing services. He noted that this addition will help customers reduce costs and lead times while ensuring the high quality that Solar Atmospheres consistently delivers. Solar Atmospheres offers comprehensive vacuum thermal processing services, handling loads up to 50,000 pounds and temperatures reaching 2400°F. With AS9100 and Nadcap accreditations, the company maintains rigorous standards to ensure reliable and precise heat treatments, meeting the exacting requirements of the aerospace sector.

Read further here.

Wisconsin Oven ships composite curing oven to Defense Industry

October 14, 2024
Source: ASM International

Wisconsin Oven ships composite curing oven to Defense Industry

Wisconsin Oven, East Troy, WI, has announced the shipment of a gas-fired walk-in batch oven to a prominent manufacturer in the defense industry. The oven is designed for curing filament wound composite materials and is capable of processing a 78,000-pound load on a 40-foot long mandrel carried by a load car.

The work chamber measures 10 feet wide, 42 feet long, and 9 feet high, with a qualified work zone of 8 feet by 40 feet by 8 feet. The oven includes a rotation system to prevent drooping of uncured composites during the heating process, offering speed control flexibility through a variable frequency drive.

This oven operates at a maximum temperature of 500°F, with temperature uniformity of ±10°F at multiple setpoints. Equipped with a PLC-based Wisconsin Oven Premium Control System and an IoT system, it allows for real-time monitoring, predictive maintenance, and remote fault diagnosis.

Additional features include split-line construction for easier shipping, two powerful recirculation blowers, interior lighting, and safety-compliant railings and ladder access.

Read further here.

One Minute Mentor: Distortion of High-Speed Steels

September 30, 2024
Source: ASM International

One Minute Mentor: Distortion of High-Speed Steels

High-speed steels show a typical distortion behavior depending on the heat treatment parameters. The figure shows the change in length of cylindrical bars (diameter = 20 mm, or 0.8 in.) and length = 140 mm, or5.5 in.), with rolling direction longitudinal to the sample) for various heat treatment conditions with austenitizing, salt bath quenching, and double tempering.

Quenching and tempering up to 500 °C (930 °F) results only in very small changes in length (either growth or shrinking). Higher tempering temperatures lead to a transformation of the retained austenite into martensite and a corresponding growth in length. For typical tempering temperature of 560 °C (1040 °F) changes in length of about 0.2% take place. Additional alloying with Co (5%) leads to slightly higher changes in length. The effect of an additional third tempering shifts the curve slightly to the left, whereas oil quenching leads to a slight reduction of the change in length.

For more information, click on the link below (subscription required). Then scroll to Figure 9. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Constellium celebrates the grand opening of its new recycling center in France


Source: ASM International

Constellium celebrates the grand opening of its new recycling center in France

Constellium, Paris, announced the grand opening of its new advanced recycling center in Neuf-Brisach, France. The €130 million investment, supported by a grant from the France Relance investment program, is aimed at boosting Constellium’s presence in the automotive and packaging industries while fostering a circular, sustainable economy. The new facility will increase the plant’s recycling capacity for automotive and packaging products by up to 75%, adding 130,000 metric tons of capacity.

With the expanded capabilities, the Neuf-Brisach plant expects to raise the recycled content of its products, meeting the growing demand for sustainable materials. This investment brings Constellium’s global recycling capacity to approximately 735,000 metric tons and will help reduce greenhouse gas emissions by 400,000 metric tons, aligning with the company’s goal of a 30% emissions intensity reduction by 2030 and increasing recycled input to at least 50% by the same year.

The facility incorporates energy-efficient technologies designed to minimize environmental impact, including reduced water consumption and air emissions, and biodiversity studies were conducted to protect the local ecosystem during construction.

Read further here.

SECO/WARWICK announces expansion of Meadville facilities

September 2, 2024
Source: ASM International

SECO/WARWICK announces expansion of Meadville facilities

SECO/WARWICK, Meadville, PA, has announced plans to expand its manufacturing facilities to enhance service for North American customers. The expansion involves relocating part of its manufacturing operations and a metallurgical lab for vacuum furnaces from Poland to Crawford County, PA.

Pennsylvania’s Department of Community and Economic Development (DCED) will support this initiative with a $2 million grant under the Redevelopment Assistance Capital Program (RACP), which SECO/WARWICK will match. Additionally, $69,000 in matching funds will be provided for job training through the Workforce & Economic Development Network (WEDnet).

The expansion will occupy a 120,000 sq. ft. facility in the Crawford Business Park, a site redeveloped from the former American Viscose Corporation mill. This development is expected to benefit the community and bolster SECO/WARWICK’s capabilities in producing heat-treating and aluminum melting furnaces.

Read further here

Harper International Receives Order for Scientific Line for Pitch Carbon Fiber

July 28, 2024
Source: ASM International

Harper International Receives Order for Scientific Line for Pitch Carbon Fiber

Harper International, Buffalo, NY, announces that it has been awarded a contract to engineer and manufacture a Scientific Line for the production of Bitumen Pitch Carbon, which will be installed at Alberta Innovates, located in Edmonton, Alberta, Canada. The facility will be operated by InnoTech Alberta, a wholly-owned subsidiary of Alberta Innovates. The equipment delivery and start-up services are scheduled for 2025.

This pilot-scale equipment will be used by researchers as part of the Carbon Fibre Grand Challenge launched by Alberta Innovates. The challenge aims to accelerate the development of large-scale production pathways for short and continuous carbon fiber from bitumen-derived feedstocks. Phase III of the competition will allow projects to demonstrate, in a repeatable manner, the ability to manufacture carbon fiber, incorporate it into prototypes, and understand the techno-economics associated with the designed process.

“Harper is pleased to support Alberta Innovates Carbon Fibre Grand Challenge to successfully create an alternative carbon fiber precursor with our customized Scientific Line. Carbon fiber from bitumen-derived precursor will significantly lower the price and have a smaller environmental impact,” says Briana Tom, Harper Sales Engineer.

Harper International is a world leader in thermal processing solutions for advanced materials. This latest contract highlights their commitment to innovation and supporting sustainable advancements in material science.

Read further here.

Seco Vacuum delivers Vector Furnace to major automotive supplier in Mexico


Source: ASM International

Seco Vacuum delivers Vector Furnace to major automotive supplier in Mexico

Seco Vacuum, Meadville, PA, announces that an international Tier 1 automotive supplier headquartered in the USA has ordered a Vector vacuum furnace for one of their facilities in Mexico.

The Vector 15VP furnace is capable of a variety of thermal processes. Its hot zone measures 36x36x48 inches (900x900x1200 mm) and has a 3,300 lb. (1500 kg) capacity. It features convection heating and a mechanical vacuum pump system, meeting or exceeding the specifications necessary for the production line’s brazing process.

Typically, SECO/VACUUM furnaces are custom-engineered; however, this particular furnace was fabricated ahead of time as a stock item to meet the contingency of a customer requesting immediate delivery. This strategic move allowed the heat treat partner to quickly and seamlessly ramp up production capacity. Additionally, if production demand shifts, the new Vector vacuum furnace can be easily repurposed for other heat treat processes, offering significant versatility.

“We built this furnace to be ready to be shipped and put into operation very quickly, which is just the solution they were looking for,” said SECO/VACUUM Managing Director Piotr Zawistowski.

Read further here