Web Content Display
Mechanical Testing of Metals, January 22-25, 2018
January 22, 2018 - January 25, 2018
Venue: ASM World Headquarters - Materials Park | Location: Novelty, OH, 44073-0002
Instructor: Mr. William L. Mankins, FASM | Classroom | Product code: 223341118
Price: $3000.00 Member Price: $2800.00
NO SEATS AVAILABLE More information about this course
Apr 16, 2018 - Apr 19, 2018 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Mr. William L. Mankins, FASM
Sep 24, 2018 - Sep 27, 2018 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Mr. William L. Mankins, FASM
Dec 10, 2018 - Dec 13, 2018 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Mr. William L. Mankins, FASM
This course is a hands-on introduction to standard mechanical testing and the properties derived from those tests, together with a discussion of testing philosophy to determine suitability for service and suitability for manufacture. Standardized testing procedures (ASTM, SAE, AWWA, etc.) are discussed, including limitations of a test, why specific requirements are present in the test procedure, and interpretation of experimental results. There is discussion of how metallurgical variables can affect test results, and how microstructure can affect selection of a given testing procedure. (For example, hardness testing of wrought vs. cast material.) This course is taught at a level that requires some algebraic manipulation as well as the use of logarithms. Students are required to bring a scientific calculator.
ASM Handbook Volume 8 is included when taking this course.
WHO SHOULD ATTEND?
- Design Engineers
- Process Engineers
- QA Managers
- Product Development Specialists
- Sales and Purchasing Professionals
- Some exposure to metallurgy and the correlation of mechanical properties to microstructure is helpful.
- Mathematics background that includes exposure to algebra and the use of logarithms is recommended.
Upon completion of this course, you should be able to:
- Select the appropriate Hardness Testing method for the sample geometry and material condition
- Perform a variety of standardized tension, torsion and impact tests to determine the mechanical properties
- Interpret test data to calculate mechanical properties such as Young's modulus, Ultimate Tensile Strength, Offset Yield Strength and Ductility
Continuing Education Units: 3.0
1. Introduction to Mechanical Testing
2. Instrumentation and Calibration of Mechanical Testing Equipment
3. Hardness Testing
4. Fundamentals of Tension and Compression Testing
5. Special Applications of Tension and Compression Testing
6. Shear, Torsion, Creep and Creep Rupture Testing
7. Ductility and Formability Testing
8. Fracture Testing
9. Fatigue Testing
Mr. William L. Mankins, FASM, graduated from West Virginia University with a BS degree in Mechanical Engineering and a MS degree in Metallurgical Engineering. He served two years in the US Army at the US Army Air Defense Center, Fort Bliss, Texas, working with and teaching air defense missile systems. He is a registered Professional Engineer and a fellow of ASM International (Metals and Materials Society). Mr. Mankins was employed for more than 36 years at Inco Alloys International doing alloy development, process development, Manager of Technology Processing Center (process research laboratory), metallography, electron optics, failure analysis, and material costing before retiring in June 1998. He has been awarded 25 US patents (plus foreign patents on the same subjects) and has made numerous presentations and publications. He was selected to be an ASM-IIM (Indian Institute of Metals) visiting lecturer in India (1998) and made presentations in industry and academic institutions under the sponsorship of ASM and the Indian Institute of Metals. Upon retirement, Bill founded Metallurgical Services Inc., to solve problems for companies not having sufficient metallurgical engineering testimony as an expert witness to the legal profession regarding failure of materials or equipment He have been a member of the ASM Handbook Committee (providing technical oversight) for more than nineteen years and regularly contribute to the handbook series (21 volumes) as an author and reviewer of articles. Bill was honored to have been selected by ASM International for the MEI Instructor of Merit Award in 2001.
Venue: ASM World Headquarters - Materials Park
Location: Novelty, OH, 44073-0002
Materials Park is located 25 miles east of Cleveland and 35 miles east of Cleveland Hopkins Airport.
Education is located on the lower garden level so please park in the lower lot upon arrival at Materials Park.
STANDARD CLASS HOURS: 8:30 am - 4:30 pm unless otherwise scheduled.
LUNCH AND BREAKS: Lunch and a selection of coffee, tea and snacks are provided. Vending machines are available for purchase of soft drinks and snacks. NOTE: Please notify us at least two weeks prior to start of class of any food allergies or restrictions by email to email@example.com and we will do our best to accommodate your request.
LODGING: The ASM Headquarters preferred hotel for the 2017 year is Doubletree by Hilton. The room rate is $107-$109 and includes complimentary breakfast buffet, high speed wireless internet and shuttle service within a 5 mile radius of hotel.
For your convenience, you can click on the following link to make a reservation:
DoubleTree by Hilton Cleveland East Beachwood
3663 Park East Drive, Beachwood, OH 44122
· FAMOUS warm Doubletree cookies welcoming you upon arrival
· Flat screen T.V. with premium cable & on-demand movies
· Mini-fridge & coffee pot in all rooms
· Free parking
· Onsite Restaurant – Sanctuary "The Restaurant + Wine Bar"
· 24 hour fitness center
· Indoor & Outdoor heated pool & whirlpool
· 24 hour business center
TRANSPORTATION: Students are responsible for their own transportation to and from ASM International. The closest major airport is Cleveland Hopkins International Airport, Cleveland, OH. See www.clevelandairport.com for ground transportation options and additional information.
COMMUNICATION: Access to course materials requires a unique email address for the student enrolled. All communications concerning the status of the class will be accomplished by email. It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International-email.
We look forward to seeing you at Materials Park. If you have any questions, please contact ASM International Member Service Center (440.338.5151, ext. 0 or firstname.lastname@example.org)
Please see the ASM Education Cancellation Policy for description of fees and policy on registration cancellation
Registration Fees: Any unpaid registrations MUST be paid in full on or before the first day of class.
ASM International reserves the right to cancel any class; refunding registration fees if necessary without additional financial obligation. In the event it is necessary for ASM to cancel a class, email notification will be sent no less than two weeks prior to the class starting date.
It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International—email communications will be the primary channel of communications leading up to the start of classes.
It is highly recommended that non-refundable airline tickets are purchased only after verifying that the class will run as scheduled by contacting the ASM Member Service Center (440.338.5151, ext. 0 or email@example.com). ASM International is not liable for any fees associated with a participant having to reschedule airline reservations due to a course cancellation.