Web Content Display
Practical Interpretation of Microstructures, January 23-26, 2018
January 23, 2018 - January 26, 2018
Venue: ALLIED HIGH TECH | Location: 2376 E. Pacifica Pl. Compton, CA, 90220
Instructor: Ms. Frauke Hogue FASM | Classroom | Product code: 220341118
Price: $2600.00 Member Price: $2400.00
SEATS AVAILABLE More information about this course
Aug 06, 2018 - Aug 09, 2018 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Ms. Frauke Hogue FASM
Oct 08, 2018 - Oct 10, 2018 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Dr. Daniel P. Dennies PhD, FASM
Jan 21, 2019 - Jan 24, 2019 Venue: Allied High Tech Location: 2376 E. Pacifica Pl. Compton, CA, USA Instructor: Ms. Frauke Houge, FASM
Practical interpretation is a "Hands-On" course. The microstructures, heat treatment and use of each group of alloys are presented in a lecture. The lecture is followed by viewing of actual structures on a projection screen. The features of the structures are pointed out and discussed. The students then examine the over 200 mounts at their microscope stations and compare them with an illustrated and annotated notebook of the structures. There are no required prerequisites, but the basic knowledge of sample preparation, heat treating or metallurgy will enhance the understanding of the presented material.
Students are encouraged to bring prepared metallographic specimens to the class for discussion.
WHO SHOULD ATTEND?
- Individuals who are required to interpret microstructures
Upon completion of this course, you should be able to:
- Use proper terminology to describe microstructures
- Correlate microstructures to heat treatment, mechanical properties and chemistry
- Recognize martensite, austenite, bainite, ferrite in ferrous alloys
- Determine manufacturing processes based on indications in the microstructure
- Identify structures of non-ferrous alloys such as super alloys, titanium, copper and aluminum alloys
- Understand imperfections and their cause
- Tell preparation artifacts from actual structures
Continuing Education Units: 3.0
1.Proper Terminology for Describing Microstructures
2.Optimizing the Images on the Metallograph
3.Iron/ Carbon Phase Diagram and TTT Diagram
4.Structures of Carbon and Alloy Steels as Produced by Heat Treatments
5.Structures of Stainless Steels and Heat Resisting Alloys
6.Microstructures of Titanium and Its Alloys
7.Structures of Aluminum Alloys, Cast and Wrought
8.Microstructures of Copper-Based Alloys
9.Common Failure Modes of Various Alloys
Ms. Frauke Hogue FASM is a consultant metallographer in failure analysis. After graduating from the Lette Verein in Berlin, Germany, she came to the US and worked at Voi-Shan, Culver City, CA, an aerospace fastener manufacturing company. At Voi-Shan she developed training materials and quality control procedures, and also worked closely with heat treating and manufacturing. In 1981 Frauke started to consult for corporate clients and independent laboratories, especially SEAL Laboratories, Los Angeles. The work involves training programs and all aspects of metallography for failure analysis of a wide range of materials, including electronics. She received the ASM Distinguished Educator Award in 1996 and the Instructor of Merit Award in 1997. Frauke has been a member of IMS since 1987, on the board of directors since 2000 and a member of ASM International since 1967. Frauke has served as president for IMS and also IMECA (Independent Metallurgical and Materials Engineering Consultants of California).
Venue: ALLIED HIGH TECH
Location: 2376 E. Pacifica Pl. Compton, CA, 90220
ALLIED HIGH TECH
2376 E. Pacifica Pl.
Compton, CA 90220
STANDARD CLASS HOURS: 8:30 am - 4:30 pm unless otherwise scheduled.
LUNCH AND BREAKS: Lunch and a selection of coffee, tea and snacks are provided. Vending machines are available for purchase of soft drinks and snacks. NOTE: Please notify us at least two weeks prior to start of class of any food allergies or restrictions by email to firstname.lastname@example.org and we will do our best to accommodate your request.
LODGING: Out of town attendees may stay at any of the fine hotels in the area. Allied High Tech provides a corporate rate of $186 plus taxes at the Hilton - Long Beach 701 W. Ocean Blvd. Long Beach, CA 90831 562-983-3400
COMMUNICATION: Access to course materials requires a unique email address for the student enrolled. All communications concerning the status of the class will be accomplished by email. It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International-email.
If you have any questions, please contact ASM International Member Service Center (440.338.5151, ext. 0 or email@example.com)
Please see the ASM Education Cancellation Policy for description of fees and policy on registration cancellation
Registration Fees: Any unpaid registrations MUST be paid in full on or before the first day of class.
ASM International reserves the right to cancel any class; refunding registration fees if necessary without additional financial obligation. In the event it is necessary for ASM to cancel a class, email notification will be sent no less than two weeks prior to the class starting date.
It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International—email communications will be the primary channel of communications leading up to the start of classes.
It is highly recommended that non-refundable airline tickets are purchased only after verifying that the class will run as scheduled by contacting the ASM Member Service Center (440.338.5151, ext. 0 or firstname.lastname@example.org). ASM International is not liable for any fees associated with a participant having to reschedule airline reservations due to a course cancellation.
Further Your Knowledge
Jan 21, 2019 - Jan 24, 2019
Ms. Frauke Houge, FASM
Allied High Tech,
2376 E. Pacifica Pl. Compton, CA, USA
Aug 06, 2018 - Aug 09, 2018
Ms. Frauke Hogue FASM
ASM World Headquarters - Materials Park,
Novelty, OH, USA
Oct 08, 2018 - Oct 10, 2018
Dr. Daniel P. Dennies PhD, FASM
ASM World Headquarters - Materials Park,
Novelty, OH, USA