Published: December 16, 2004
Authors: Christian Vargel
Corrosion of Aluminium offers a global approach to corrosion, comprising the selection of alloys, design principles and service conditions. This book highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references.
Authors: J.M. Robinson
The most well known manifestation of dynamic strain aging is serrated plastic flow during mechanical testing. Serrated flow was first observed in aluminium alloys by Portevin and Le Chatelier after whom the Portevin- Le Chatelier effect is named.
Published: November 01, 2013
Authors: G.M. O'Halloran, Arjan van Ijzerloo, Rene Rongen, Frank Zachariasse, NXP Semiconductors
This paper presents a quick, reliable, and fully quantitative method of measuring the intermetallic coverage of copper to aluminium bonding at time zero and post reliability stressing. This method is currently used in select manufacturing quality control processes, as well as during product release procedures.
Published: November 25, 2010
Authors: Roger Lumley
Fundamentals of Aluminium Metallurgy Production, Processing and Applications provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries. Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance.
Published: May 01, 2012
Authors: P.K. Koh, P. Cheang, SIM University; K. Loke, Singapore Technologies Kinetics Ltd.; S.C.M. Yu, Nanyang Technological University; S.M. Ang, Swinburne University of Technology
Deposition of amorphous aluminium powder using cold spray technology as a corrosion prevention measure was studied. Amorphous aluminium (Al-Ni-Ce) powder was successfully deposited on 7000-series aluminium substrates using cold spray parameters of 1.7 MPa under compressed air and temperature of 450oC.
Authors: V. Pokhmurskii, G.V. Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine; G. Nykyforchyn, G.V. Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine; M. Student, G.V. Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine; M. Klapkiv, G.V. Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine; H. Pokhmurska, Chemnitz University of Technology, Institute of Composite Materials; B. Wielage, Chemnitz University of Technology, Institute of Composite Materials; T. Grund, Chemnitz University o
Different post treatment methods such as heat treatment, mechanical processing, sealing, etc. are known to be capable to improve microstructure and exploitation properties of thermal spray coatings. In this work a plasma electrolytic oxidation of aluminium coatings obtained by arc spraying on aluminium and carbon steel substrates is carried out.
Authors: M. Chakraborty
There has been a considerable interest in the ternary Al-Ti-B system amongst the aluminium casting fraternity.
Authors: A. Mandal, S. Deepak Kumar, M. Chakraborty
The present work highlights the synthesis, processing and characterization of Aluminium based in-situ metal matrix composites (MMCs) reinforced with titanium diboride (TiB2) particles created by an exothermic reaction of K2TiF6 and KBF4 with molten aluminium.
Published: October 01, 2012
Authors: Krzysztof Mroczka, Pedagogical University of Cracow; Adam Pietras, Institute of Welding
This paper will present the results of the investigation of the following Friction Stir Welded (FSW) joints: AlSi9Mg/2017A and AlSi9Mg/6082, where AlSi9Mg is the casting aluminium alloy, while the 2017A and 6082 are wrought (rolled) aluminium alloys precipitation strengthened.