Web Content Filters

Filters Applied

No filters

Refine Results

Keyword(s)

MATERIALS RESOURCES

Superalloys, September 30-October 2, 2019

September 30, 2019 - October 02, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. John Marcin, FASM

Knowledge of superalloys is key to designing the critical components used in the most challenging applications. This course allows you to dive deep into this unique class of materials that exhibit superior mechanical strength, corrosion resistance, and surface stability. You will focus on the nature, properties, and usage of metal alloys. The content for the Superalloys course will include materials, superalloy properties, corrosion behavior, a look towards the future of superalloys, and more.

Learning & Professional Development / Courses / Classroom

Introduction to Metallurgical Lab Practices, September 23-25, 2019

September 23, 2019 - September 25, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. John Peppler

Basic techniques commonly used in a Metallurgical Laboratory will be taught in this class. You will become familiar with metallography by sectioning, mounting, grinding, polishing and etching samples. These samples will be examined and photomicrographs obtained by using optical microscopes equipped with digital cameras. Various Microhardness and Macrohardness equipment will be used to demonstrate the strengths and limitations of the tests. Tensile Testing and Impact Testing will be performed on standard samples. Basic principles and sample demonstration on the use of Scanning Electron Microscopy (SEM) will be covered. Hands on testing complimented by lectures on the basics of the tests will give a thorough overview of these procedures. This is the course you need if you learn by doing and could use an overview of Metallographic Lab procedures.

Learning & Professional Development / Courses / Classroom

Heat Treating Furnaces and Equipment, September 19-20, 2019

September 19, 2019 - September 20, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Jon L. Dossett, P.E.

Heat treating is key to most manufacturing process, so the equipment used is just as important as the process itself. This course provides an overview of essential aspects associated with various furnace units used to heat treat metallic parts. For your benefit, the course will take place in the classroom as well as two guided factory tours. This will give you an inside view of the world of heat treating furnaces and equipment.

Learning & Professional Development / Courses / Classroom

Basics of Heat Treating, September 16-18, 2019

September 16, 2019 - September 18, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Jon L. Dossett, P.E.

Heat treating is considered the least understood, but most integral part of the manufacturing processes. An efficient heat treating process reduces the overall manufacturing costs associated with energy use, scrap, re-work, and quality issues. Heat treating is critical for your business and industry.

Learning & Professional Development / Courses / Classroom

Powder Metallurgy for Additive Manufacturing, September 16-18, 2019

September 16, 2019 - September 18, 2019
Novelty, OH, 44073-0002, USA
Instructor: Howard Kuhn, PhD, FASM

Additive manufacturing (AM), also termed as "3-D Printing", is a digital manufacturing process, which uses 3-D design data to build objects by depositing material, usually layer upon layer. Often referred to as the third industrial revolution, the advancement of AM technologies has brought a revolutionary change in design, engineering and manufacturing processes. The rising popularity of AM across various industries has resulted in an exponential increase in demand for metal powders. Powder metallurgy (P/M) is a metal working process involving production of powdered metals and/ forming precision metal components from metal powders by compacting in a die. Materials now routinely processed by P/M include aerospace super alloys, low-alloy steels, and tool steels; some of which are virtually impossible to process by any other means. This course provides a comprehensive overview of the science and technology of both AM and P/M processes, the materials used in those processes, geometric flexibility, industrial applications and limitations.

Learning & Professional Development / Courses / Classroom

Metallography for Failure Analysis, September 9-12, 2019

September 09, 2019 - September 12, 2019
Novelty, OH, 44073-0002, USA
Instructor: Ms. Frauke Hogue, FASM

This practical lab course focuses on metallographic techniques of failure analysis and will take you through the process of initial visual examination, fracture cleaning, documentation, and unusual metallographic sample preparation techniques and metallographic interpretation of various failure modes. You are encouraged to bring your own samples to prepare. Samples of various failure modes will also be provided.

Learning & Professional Development / Courses / Classroom

Metallurgy for the Non-Metallurgist® Midlands, September 9-12, 2019

September 09, 2019 - September 12, 2019
Columbia, SC, 29203, United States
Instructor: George D. Neale, MS, PE

Metals and alloys are used in the greatest variety of applications of all engineering materials and drive your products success. That is why it's crucial to have knowledge about what metals are, how they behave, and why they behave differently than ceramics, glass, and plastics. This course will provide you with essential knowledge about metallurgy and how to apply it your business or industry.

Learning & Professional Development / Courses / Classroom

Fractography, August 26-29, 2019

August 26, 2019 - August 29, 2019
Novelty, OH, 44073-0002, USA
Instructor: Ashok Choudhury, PhD, CLP

This course is designed for a broad cross-section of failure analysis practitioners. Failure analysis principles, tools and mechanisms are covered in detail. In addition, the practical aspects and importance of considering the failed part, the material of construction and the failure circumstances in combination is stressed. Emphasis is placed on learning the macroscopic failure modes and correlation of these observations with microscopic fracture surface features. The salient points are illustrated with case histories. Course attendees are also encouraged to bring case histories to share in an interactive manner.

Learning & Professional Development / Courses / Classroom

Advanced Metallographic Techniques, August 19-22, 2019

August 19, 2019 - August 22, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Natalio T. (Nat) Saenz, FASM

Learn basic and advanced metallographic techniques that will reveal the true microstructural characteristics of a wide range of materials.  The theory and understanding of the proper selection of abrasives, lubricants, equipment, polishing cloths/pads and a basic understanding of chemomechanical polishing will be discussed. The course covers the preparation methods of most metals and alloys, composites, hard metals, ceramics and coatings.

Learning & Professional Development / Courses / Classroom

Data-Driven Materials Manufacturing (in partnership with the Colorado School of Mines), August 19-21, 2019

August 19, 2019 - August 21, 2019
Novelty, OH, 44073-0002, USA
Instructor: Branden Kappes, Ph.D.

Machine learning, also known as Artificial Intelligence or AI, is a statistical and algorithmic framework that has impacted materials science and manufacturing through its ability to model the hidden connections between observations and response. Targeted toward technical professionals and graduate students, this course will introduce the mathematical, statistical, and programming skills necessary to construct some of the most common machine learning algorithms, multivariate regression and neural networks, and to provide a foundation for evaluating the scope and applicability of machine learning for materials and manufacturing problems.

Learning & Professional Development / Courses / Classroom

ASM Affiliate Societies