Web Content Filters

Filters Applied

No filters

Refine Results

Keyword(s)

Search results

Heat Treating for the Non-Heat Treater, October 21-23, 2019

October 21, 2019 - October 23, 2019
Novelty, OH, 44073-0002, USA
Instructor: Dr. D. Scott MacKenzie, PhD, FASM

This course is for the Non Heat Treater (part designers, material specifiers, purchasing agents and technicians) who need a basic education in heat treating and need to learn how to "speak the language". The focus will be on the "value added" by heat treating. The effects that heat treating process parameters (time, temperature and atmospheres) have on the final properties of a product and the links between microstructure and mechanical properties are discussed, as well as reasons for distortion, cracking and part rejections.

Learning & Professional Development / Courses / Classroom

Practical Heat Treating, October 7-10, 2019

October 07, 2019 - October 10, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. William L. Mankins, FASM

Practical Heat Treating Teaches the "how" of Heat Treating. You will learn the heat treatment process of steel as well as what type of atmosphere is best for furnace operations for the safety of personal and equipment. In addition you will be able to recognize heat treating problems and establish quality control procedures. Plant Managers, Quality Control specialists and Engineers alike will be able to benefit from attending this 4 day event.

Learning & Professional Development / Courses / Classroom

Metallurgy for the Non-Metallurgist®, October 7-10, 2019

October 07, 2019 - October 10, 2019
Novelty, OH, 44073-0002, USA
Instructor: Dr. McIntyre. R. Louthan, Jr., PhD, FASM

Metals and alloys are used in the greatest variety of applications of all engineering materials and drive your products success. That is why it's crucial to have knowledge about what metals are, how they behave, and why they behave differently than ceramics, glass, and plastics. This course will provide you with essential knowledge about metallurgy and how to apply it your business or industry.

Learning & Professional Development / Courses / Classroom

Introduction to Metallurgical Lab Practices, September 23-25, 2019

September 23, 2019 - September 25, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. John Peppler

Basic techniques commonly used in a Metallurgical Laboratory will be taught in this class. You will become familiar with metallography by sectioning, mounting, grinding, polishing and etching samples. These samples will be examined and photomicrographs obtained by using optical microscopes equipped with digital cameras. Various Microhardness and Macrohardness equipment will be used to demonstrate the strengths and limitations of the tests. Tensile Testing and Impact Testing will be performed on standard samples. Basic principles and sample demonstration on the use of Scanning Electron Microscopy (SEM) will be covered. Hands on testing complimented by lectures on the basics of the tests will give a thorough overview of these procedures. This is the course you need if you learn by doing and could use an overview of Metallographic Lab procedures.

Learning & Professional Development / Courses / Classroom

Heat Treating Furnaces and Equipment, September 19-20, 2019

September 19, 2019 - September 20, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Jon L. Dossett, P.E.

Heat treating is key to most manufacturing process, so the equipment used is just as important as the process itself. This course provides an overview of essential aspects associated with various furnace units used to heat treat metallic parts. For your benefit, the course will take place in the classroom as well as two guided factory tours. This will give you an inside view of the world of heat treating furnaces and equipment.

Learning & Professional Development / Courses / Classroom

Powder Metallurgy for Additive Manufacturing, September 16-18, 2019

September 16, 2019 - September 18, 2019
Novelty, OH, 44073-0002, USA
Instructor: Dr. Howard Kuhn, PhD, FASM

Additive manufacturing (AM), also termed as "3-D Printing", is a digital manufacturing process, which uses 3-D design data to build objects by depositing material, usually layer upon layer. Often referred to as the third industrial revolution, the advancement of AM technologies has brought a revolutionary change in design, engineering and manufacturing processes. The rising popularity of AM across various industries has resulted in an exponential increase in demand for metal powders. Powder metallurgy (P/M) is a metal working process involving production of powdered metals and/ forming precision metal components from metal powders by compacting in a die. Materials now routinely processed by P/M include aerospace super alloys, low-alloy steels, and tool steels; some of which are virtually impossible to process by any other means. This course provides a comprehensive overview of the science and technology of both AM and P/M processes, the materials used in those processes, geometric flexibility, industrial applications and limitations.

Learning & Professional Development / Courses / Classroom

Basics of Heat Treating, September 16-18, 2019

September 16, 2019 - September 18, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Jon L. Dossett, P.E.

Heat treating is considered the least understood, but most integral part of the manufacturing processes. An efficient heat treating process reduces the overall manufacturing costs associated with energy use, scrap, re-work, and quality issues. Heat treating is critical for your business and industry.

Learning & Professional Development / Courses / Classroom

Metallography for Failure Analysis, September 9-12, 2019

September 09, 2019 - September 12, 2019
Novelty, OH, 44073-0002, USA
Instructor: Ms. Frauke Hogue, FASM

This practical lab course focuses on metallographic techniques of failure analysis and will take you through the process of initial visual examination, fracture cleaning, documentation, and unusual metallographic sample preparation techniques and metallographic interpretation of various failure modes. You are encouraged to bring your own samples to prepare. Samples of various failure modes will also be provided.

Learning & Professional Development / Courses / Classroom

Metallurgy for the Non-Metallurgist® Midlands, September 9-12, 2019

September 09, 2019 - September 12, 2019
Columbia, SC, 29203, United States
Instructor: George D. Neale, MS, PE

Metals and alloys are used in the greatest variety of applications of all engineering materials and drive your products success. That is why it's crucial to have knowledge about what metals are, how they behave, and why they behave differently than ceramics, glass, and plastics. This course will provide you with essential knowledge about metallurgy and how to apply it your business or industry.

Learning & Professional Development / Courses / Classroom

Fractography, August 26-29, 2019

August 26, 2019 - August 29, 2019
Novelty, OH, 44073-0002, USA
Instructor: Ashok Choudhury, PhD, CLP

This course is designed for a broad cross-section of failure analysis practitioners. Failure analysis principles, tools and mechanisms are covered in detail. In addition, the practical aspects and importance of considering the failed part, the material of construction and the failure circumstances in combination is stressed. Emphasis is placed on learning the macroscopic failure modes and correlation of these observations with microscopic fracture surface features. The salient points are illustrated with case histories. Course attendees are also encouraged to bring case histories to share in an interactive manner.

Learning & Professional Development / Courses / Classroom

Steel Metallography, August 12-15, 2019

August 12, 2019 - August 15, 2019
Novelty, OH, 44073-0002, USA
Instructor: Dr. Laura Moyer, PhD

The ability to understand and control microstructure and properties in steels is critical for many industries and applications.This course deals specifically with the metallographic preparation of steels to reveal the microstructure accurately and provides a unique perspective and understanding for interpretation of steel microstructures. The class works as a team to build a reference notebook of steel microstructures and will perform heat treatment, metallography, hardness, and micro-hardness testing. The class will learn to determine prior austenitic grain size, and understand the effect of cooling rate on the resulting microstructure; learn how to identify Austenite, Ferrite, Pearlite, Bainite (upper and lower), and Martensite (lath and plate), and understand the formation and growth of these microstructures. The course includes video shot using a hot stage microscope at Lehigh University that shows several phase transformations common to steels in real time

Learning & Professional Development / Courses / Classroom

Principles of Failure Analysis, August 7-9, 2019

August 07, 2019 - August 09, 2019
2376 E. Pacifica Pl., Rancho Dominguez, CA, 90220, USA
Instructor: Daniel P. Dennies, PhD, FASM

This lecture course is designed to provide the knowledge to bridge the gap between theory and practice of failure analysis. This course presents a very practical approach to failure analysis for those who are new to the field or those who want an update. It is also designed for technicians with the pre-requisites and those interested in understanding how knowledge of failure analysis can lead to better productivity. Causes of fractures are explained with diagrams of stress application and distribution. Many case histories of failures and their elimination are highlighted throughout the course.

Learning & Professional Development / Courses / Classroom

Corrosion, August 5-8, 2019

August 05, 2019 - August 08, 2019
Novelty, OH, 44073-0002, USA
Instructor: Mr. Thomas K. (Tom) Glasgow, FASM

Corrosion occurs in all industries from automotive and aerospace to infrastructure, construction, petroleum, power, paper making, food processing, bio-engineering, and pharmaceuticals. Corrosion is costly, dangerous, wasteful, and unsightly. It can be predicted, controlled, and even avoided. This class presents an overview of the eight major corrosion processes and related corrosion monitoring, prediction and control mechanisms. The principles discussed are applicable to all metals. Emphasis is on practical applications of corrosion technology to industrial corrosion problems.

Learning & Professional Development / Courses / Classroom

Practical Interpretation of Microstructures, August 5-8, 2019

August 05, 2019 - August 08, 2019
Novelty, OH, 44073-0002, USA
Instructor: Ms. Frauke Hogue, FASM

This "Hands-On" course presents information on microstructures, heat treatment and use of each group of alloys. You will be able to view actual structures on a projection screen.The features of the structures are pointed out and discussed. You will then examine the over 200 mounts at their microscope stations and compare them with an illustrated and annotated notebook of the structures. There are no required prerequisites, but the basic knowledge of sample preparation, heat treating or metallurgy will enhance the understanding of the presented material. You are encouraged to bring prepared metallographic specimens to the class for discussion.

Learning & Professional Development / Courses / Classroom

How to Organize and Run a Failure Investigation, August 5-6, 2019

August 05, 2019 - August 06, 2019
2376 E. Pacifica Pl., Rancho Dominguez, CA, 90220, USA
Instructor: Daniel P. Dennies, PhD, FASM

You will learn a proven systematic approach to failure investigation, which utilizes examples from the aerospace industry and teaches the steps you need to follow. The effect of various failure sources, such as corrosion, on the organization of the investigation will be analyzed. It will provide a learning platform for engineers from all disciplines; materials, design, manufacturing, quality and management.

Learning & Professional Development / Courses / Classroom

ASM Affiliate Societies