Web Content Display
Practical Interpretation of Microstructures, October 8-10, 2018
October 08, 2018 - October 10, 2018
Venue: ASM World Headquarters - Materials Park | Location: Novelty, OH, 44073-0002
Instructor: Dr. Daniel P. Dennies PhD, FASM | Classroom | Product code: 220344A18
Price: $3000.00 Member Price: $2800.00
SEATS AVAILABLE More information about this course
Jan 21, 2019 - Jan 24, 2019 Venue: Allied High Tech Location: 2376 E. Pacifica Pl. Compton, CA, USA Instructor: Ms. Frauke Houge, FASM
Apr 08, 2019 - Apr 10, 2019 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Dr. Daniel P. Dennies, PhD, FASM
Aug 05, 2019 - Aug 08, 2019 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Ms. Frauke Hogue, FASM
Nov 04, 2019 - Nov 06, 2019 Venue: ASM World Headquarters - Materials Park Location: Novelty, OH, USA Instructor: Dr. Daniel P. Dennies, PhD, FASM
Practical interpretation is a "Hands-On" course. The microstructures, heat treatment and use of each group of alloys are presented in a lecture. The lecture is followed by viewing of actual structures on a projection screen. The features of the structures are pointed out and discussed. The students then examine the over 200 mounts at their microscope stations and compare them with an illustrated and annotated notebook of the structures. There are no required prerequisites, but the basic knowledge of sample preparation, heat treating or metallurgy will enhance the understanding of the presented material.
Students are encouraged to bring prepared metallographic specimens to the class for discussion.
WHO SHOULD ATTEND?
- Individuals who are required to interpret microstructures
Upon completion of this course, you should be able to:
- Use proper terminology to describe microstructures
- Correlate microstructures to heat treatment, mechanical properties and chemistry
- Recognize martensite, austenite, bainite, ferrite in ferrous alloys
- Determine manufacturing processes based on indications in the microstructure
- Identify structures of non-ferrous alloys such as super alloys, titanium, copper and aluminum alloys
- Understand imperfections and their cause
- Tell preparation artifacts from actual structures
Continuing Education Units: 3.0
- Proper Terminology for Describing Microstructures
- Optimizing the Images on the Metallograph
- Iron/ Carbon Phase Diagram and TTT Diagram
- Structures of Carbon and Alloy Steels as Produced by Heat Treatments
- Structures of Stainless Steels and Heat Resisting Alloys
- Microstructures of Titanium and Its Alloys
- Structures of Aluminum Alloys, Cast and Wrought
- Microstructures of Copper-Based Alloys
- Common Failure Modes of Various Alloys
Dr. Daniel P. Dennies PhD, FASM is a licensed metallurgical Professional Engineer (P.E.) in the state of California. Dr. Dennies has over 35 years of experience in various raw material, forging, aerospace, and aircraft related industries as a technical specialist, technical manager, and program manager. The majority of his career has been in the aerospace industry working on projects such as the Space Shuttle Main Engine, the National Launch System, the National Aerospace Plane, expendable launch systems like Delta and Titan, and the International Space Station. He has also worked on other projects including commercial aircraft such as the Boeing 787, military aircraft such as the C17 Transport and B1-B Bomber, proprietary programs such as the Ground Based Missile Defense and the X-37B Experimental Reusable Unmanned Space Plane. Dr. Dennies broadened his manufacturing experience and industrial knowledge by working in the forging industry and the raw material industry. In addition he has worked on projects concerning the biomedical devices, fasteners and energy industries.
Dr. Dennies has accumulated experience with a wide variety of materials, processes and test mechanisms through his association with the design, testing, failure analysis, and manufacturing aspects of these programs. His broad areas of expertise include failure analysis, engineering design support, material and process selection, material testing, customer or supplier interaction, and program development and management. He is a member of multiple professional organizations, where he has served on the board of trustees and several national committees, many as chairman. He has over 10 professional awards and was awarded a patent in 1988. Dr. Dennies has taught multiple courses a year since 2000, has given numerous technical presentations, and is highly published. He authored the books "How to Organize and Run a Failure Investigation" and "Robot Wars in the City of Materials."
He has been a member of ASMI for 37 years and is a 2002 ASM Fellow. He is also the recipient of the 2004 Allan Ray Putman Award and the 2011 George Roberts Award. Dan received the 2005 Orange County Engineering Council Prestigious Engineering Achievement Award and is a honoree of the coveted NASA Silver Snoopy Award. He was a founding Materials Mentor for the Eisenman Materials Camp for Students in 2000 and has attended a Materials Camp as a Materials Mentor each year since. He has been the coordinator and master teacher for Teachers Materials Camp in LA since 2004. Dan is active on the local level as member of the LA Chapter executive board and the national level on various ASMI national committees. Dr. Dennies is a past Board of Trustee for both the ASMI Materials Education Foundation and Society.
Venue: ASM World Headquarters - Materials Park
Location: Novelty, OH, 44073-0002
Materials Park is located 25 miles east of Cleveland and 35 miles east of Cleveland Hopkins Airport.
Education is located on the lower garden level so please park in the lower lot upon arrival at Materials Park.
When using a GPS or other map program make sure to enter the city as NOVELTY, OH to locate ASM International.
STANDARD CLASS HOURS: 8:30 am - 4:30 pm unless otherwise scheduled.
LUNCH AND BREAKS: Lunch and a selection of coffee, tea and snacks are provided. Vending machines are available for purchase of soft drinks and snacks. NOTE: Please notify us at least two weeks prior to start of class of any food allergies or restrictions by email to ASMEducationCourses@asminternational.org and we will do our best to accommodate your request.
LODGING: The ASM Headquarters preferred hotel for the 2018 year is DoubleTree by Hilton. DoubleTree by Hilton Cleveland East Beachwood, 3663 Park East Drive, Beachwood, OH 44122, (216) 464-5950.
ASM International Group Rate of $109 includes the following:
* Complimentary Breakfast Buffet
* Shuttle Transportation within 5 mile radius of hotel
* Complimentary wireless high-speed internet in all guestrooms
· FAMOUS warm Doubletree cookies welcoming you upon arrival
· Flat screen T.V. with premium cable & on-demand movies
· Mini-fridge & coffee pot in all rooms
· Free parking
· Onsite Restaurant – Sanctuary “The Restaurant + Wine Bar”
· Room Service is offered
· 24 hour fitness center
· Indoor & Outdoor heated pool & whirlpool
· 24 hour business center
***TO RECEIVE THE ITEMS ABOVE AND THE GROUP RATE YOU MUST BOOK YOUR RESERVATION THROUGH THIS LINK ONLY: ASM International Reservation Link
TRANSPORTATION: Students are responsible for their own transportation to and from ASM International which is located at 9639 Kinsman Road, Novelty, Ohio 44073-0002. The closest major airport is Cleveland Hopkins International Airport, Cleveland, OH. See www.clevelandairport.com for ground transportation options and additional information.
COMMUNICATION: Access to course materials requires a unique email address for the student enrolled. All communications concerning the status of the class will be accomplished by email. It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International-email.
We look forward to seeing you at the Dome. If you have any questions, please contact ASM International Member Service Center (440.338.5151, ext. 0 or email@example.com)
REGISTRATION FEES: Any unpaid registrations MUST be paid in full on or before the first day of class.
COURSE CANCELLATION: ASM International reserves the right to cancel any class; refunding registration fees, if necessary without additional financial obligation. In the event it is necessary for ASM to cancel a class, email notification will be sent no less than two weeks prior to the class starting date.
It is the responsibility of the class registrant to ensure that a valid email address has been supplied and email filter settings are not preventing delivery of emails from ASM International—email communications will be the primary channel of communications leading up to the start of classes.
It is highly recommended that non-refundable airline tickets are purchased only after verifying that the class will run as scheduled by contacting the ASM Member Service Center (440.338.5151, ext. 0 or firstname.lastname@example.org). ASM International is not liable for any fees associated with a participant having to reschedule airline reservations due to a course cancellation.
For additional information, please see the ASM Education Cancellation Policy for description of fees and policy on registration cancellation.
Further Your Knowledge
Jan 21, 2019 - Jan 24, 2019
Ms. Frauke Houge, FASM
Allied High Tech,
2376 E. Pacifica Pl. Compton, CA, USA
Aug 05, 2019 - Aug 08, 2019
Ms. Frauke Hogue, FASM
ASM World Headquarters - Materials Park,
Novelty, OH, USA
Apr 08, 2019 - Apr 10, 2019
Dr. Daniel P. Dennies, PhD, FASM
ASM World Headquarters - Materials Park,
Novelty, OH, USA