Bio-based wash primer expands validation on industrial carbon steels

The growing need to replace chromated primers used in steel corrosion protection has driven the development of safer and more sustainable alternatives. BIO FLAV PRIMER, a bio-based wash primer developed from valorized agro-industrial byproducts offers an alternative to conventional primers formulated with zinc tetroxychromate, eliminating the use of chromated compounds and combining high corrosion protection with a nontoxic, biodegradable, and environmentally friendly formulation.

The protection mechanism is based on the interaction of natural compounds with the metal surface, where they form a molecular network of chelates capable of stabilizing existing corrosion products and generating a continuous, adherent, and non-porous organic film. This passivating interfacial layer stabilizes the substrate and provides an excellent base for the adhesion of subsequent coatings.

Developed by BIOFLAV Ingenieria de Superficies, comparative studies of the primer conducted on SAE 1010 steel demonstrated superior performance compared to the benchmark commercial wash primer formulated with zinc tetroxychromate, achieving 92% corrosion protection efficiency under the evaluated conditions. While the chromated primer relies on active pigments that are progressively consumed during service, the organic film developed by BIO FLAV PRIMER maintained highly stable electrochemical behavior throughout the evaluation period.

As part of the current technological validation stage, prior to pre-pilot and pilot scale-up, the development is extending its evaluation to other carbon steels of industrial interest. For this purpose, an oil drilling rod made of SAE 4140 carbon steel, discarded after a failure mechanism in service and exhibiting significant surface deterioration, is being used. The use of a recovered industrial component previously subjected to severe operating conditions allows for the evaluation of the coating’s performance in a representative service scenario, providing evidence for the subsequent stages of technological scale-up and its future industrial and infrastructure implementation.

For more information:

BIOFLAV Ingenieria de Superficies

Image – Discarded SAE 4140 carbon steel oil drill rod following a failure in service, after several months of environmental exposure. The upper section, protected with BIO FLAV PRIMER, demonstrates the coating’s versatility: in previously corroded areas, it stabilizes corrosion products through chelation, while the untreated lower section, used as a reference, exhibits generalized oxidation.

SECO/WARWICK USA delivers second vacuum tempering furnace to aerospace manufacturer

SECO/WARWICK USA, Meadville, Pa., announced that a leading international aircraft motion-control manufacturer has placed a repeat order for an identical low-temperature vacuum tempering furnace, following the success of the first unit installed at the customer’s facility. The new furnace is designed for tempering, ageing, and other sub-critical heat-treat processes, with a maximum operating temperature of 1380°F, a 24-by-24-by-36-in. work zone, and a load capacity of 1750 pounds. It meets AMS2750F Class 2 temperature uniformity requirements (±10°F) and supports nitrogen convection heating and cooling, with final cooling handled by an internal recirculation blower and a water-cooled heat exchanger. The repeat unit adds to the customer’s existing SECO/WARWICK installed base, which includes multi-chamber CaseMaster Evolution furnaces in double- and triple-chamber configurations and a Vector single-chamber high-pressure gas-quench vacuum furnace deployed across multiple sites. “This customer’s continued investment in SECO/WARWICK equipment reflects their trust in the quality and reliability required for aerospace applications,” said Piotr Zawistowski, managing director of SECO/WARWICK USA. “Their repeat business underscores the strength of our technology and our long-term customer relationships.” SECO/WARWICK Group is a global manufacturer of vacuum and atmosphere heat-treatment equipment, with headquarters in Świebodzin, Poland, and US operations based in Meadville, Pennsylvania, serving aerospace, automotive, medical, energy, and tool steel markets.

Read further here

Fort Wayne Metals receives Medtronic 2025 Supplier Innovation Excellence Award

Fort Wayne Metals, Fort Wayne, Indiana, received Medtronic’s 2025 Supplier Innovation Excellence Award for its nitinol melt program, which Medtronic recognized for strengthening global supply chain resilience and supporting the advancement of life-improving medical technologies.

Fort Wayne Metals is a fully integrated nitinol supplier, controlling every step of the manufacturing process from ingot melting through custom finishing of wires, tubes, and components. The company began working with nitinol in 1991 and established a dedicated melt facility in 2012. Between 2022 and 2024, production of melted nitinol for medical applications doubled, and a second vacuum arc remelting (VAR) furnace brought online in early 2025 positions the company to double output again. Melted nitinol now represents 74 percent of all nitinol products the company sells.

“Our goal is to enable our customers to develop their innovations, from nitinol melt to custom finishing of products,” said Scott Glaze, President and CEO of Fort Wayne Metals. The award reflects the company’s role as a critical upstream supplier to medical device manufacturers developing stents, guidewires, and implantable components that rely on nitinol’s unique superelastic and shape memory properties.

Fort Wayne Metals employs more than 2,000 people across its Fort Wayne, Indiana headquarters and facilities in Columbia City, Indiana, and Galway, Ireland.

[Read further here](https://www.medicaldesignandoutsourcing.com/medtronic-nitinol-supplier-fort-wayne-metals/)

Gasbarre and SOLO Swiss Announce Exclusive Licensing Agreement for North America

Gasbarre Thermal Processing Systems, DuBois, Pennsylvania, and SOLO Swiss SA, Porrentruy, Switzerland, announced an exclusive licensing agreement granting Gasbarre the rights to promote, sell, and manufacture the SOLO ProfiTherm heat treating system in North America. The agreement was announced on January 21, 2026.

The ProfiTherm system features a modular arrangement of bell furnaces and quench tanks with direct, rapid transfer from furnace to quench. The design is positioned as a practical alternative to traditional integral quench batch furnaces, offering a more compact footprint that simplifies installation and reduces plant disruption.

ProfiTherm supports a range of heat treating processes including austempering, marquenching, carburizing, carbonitriding, and neutral hardening. Target applications include captive heat treat departments and commercial shops serving general industry, aerospace, defense, and bearing markets.

The partnership expands Gasbarre’s equipment portfolio and gives North American heat treaters access to SOLO Swiss bell furnace technology that has been widely adopted in Europe.

Read further here

Ipsen promotes seven field service engineers to senior roles

Ipsen, Cherry Valley, IL, announced the promotion of seven field service engineers to the role of senior field service engineer, recognizing their technical expertise, leadership, and dedication to customer service. The newly promoted team members include Matt Hopkins, Jesse Lawrence, Larry Dahm, Glenn Hawkins, Mike Dawson, Daniel Greifemberg, and Craig Ludewig.

These promotions reflect Ipsen’s ongoing commitment to developing a highly skilled service workforce and upholding the company’s reputation for quality, reliability, and customer trust. Each of the new senior engineers brings extensive hands-on experience supporting industrial heat-treating systems across domestic and international markets.

Lu Chouraki, field service manager at Ipsen, noted that the role of a field service engineer extends beyond technical problem-solving to include communication and professionalism that foster customer confidence. John Dykstra, chief service officer, emphasized that these engineers often serve as the face of Ipsen, and their consistent recognition by both customers and peers speaks to their impact.

Collectively, the promoted engineers have decades of experience across vacuum and atmosphere furnace systems. In their new roles, they will continue mentoring junior technicians, leading complex installations and troubleshooting efforts, and further enhancing Ipsen’s global service capabilities.

According to Chouraki, the promotions not only acknowledge individual contributions but also raise the standard across the organization. As senior field service engineers, they will play a key role in advancing Ipsen’s service excellence and customer relationships.

Read further here: https://ipsenglobal.com/knowledge-center/ipsen-elevates-seven-to-senior-field-service-roles/

Johnson Matthey to open first hydrogen internal combustion engine testing facility in Gothenburg

Johnson Matthey, London, England announced plans to open its first hydrogen internal combustion engine (H₂ICE) testing facility at its existing site in Gothenburg, Sweden. The upgraded center will expand the company’s heavy-duty vehicle testing capabilities, reflecting growing industry and regulatory momentum toward cleaner mobility technologies. The facility is expected to become operational in autumn 2025.

Building on Johnson Matthey’s previous hydrogen combustion research, the new installation will allow full engine testing for the first time. It will assess catalyst performance within broader aftertreatment and control systems, supporting the development of efficient hydrogen-powered mobility solutions.

The project follows the successful completion of Project Brunel, a collaboration launched in 2021 with Cummins, PHINIA, and Zircotec, which delivered key advances in H₂ICE engine performance and durability.

The upgraded Gothenburg site will feature its own hydrogen supply and storage system rated at up to 500 bar, hydrogen flow meters and analyzers, control and safety systems, adapted exhaust measuring instruments, and enhanced fire and gas detection. It will support engines up to 600 kW (800 hp).

Tauseef Salma, chief technology officer of Johnson Matthey Clean Air, said the expansion underscores the company’s commitment to advancing hydrogen mobility as part of global decarbonization efforts. Salma noted that hydrogen engines offer a mature and complementary solution to battery electric vehicles in achieving emissions reduction goals across Europe and beyond.

Johnson Matthey also recently joined the Global Hydrogen Mobility Alliance as a founding member. The coalition, comprising more than 30 major companies including BMW, Toyota, Hyundai, Air Liquide, and Linde, aims to accelerate adoption of hydrogen technologies in Europe’s transport sector.

Read further here

Fujian Fuwei selects Harper International for commercial-scale carbon fiber production equipment

Harper International, Buffalo, New York announced that it has been selected by Fujian Fuwei Advanced Material Co., Ltd. to supply a commercial-scale carbonization line for carbon fiber manufacturing. The equipment is scheduled for delivery to Fujian Fuwei’s facility in Yong’an City, Fujian Province in February 2026.

The turn-key thermal processing system includes three-meter-wide oxidation ovens, low- and high-temperature furnace systems, surface treatment systems, waste gas abatement, and integrated controls and auxiliary operations. The custom-engineered line is designed to enhance fiber quality through improved oxidation rates, greater temperature and velocity uniformity, and precise reaction control.

This order forms part of the first phase of Fujian Fuwei’s high-end materials investment project, valued at 2.3 billion yuan (approximately $320 million), which targets an annual carbon fiber production capacity of 4,000 metric tons. The long-term plan spans 1,142 acres and envisions scaling to 50,000 metric tons per year.

Harper noted that its technology and on-site support services are designed to accelerate commissioning and reduce time-to-market for new production lines. Company vice president Paul Elwell stated that Harper’s carbonization systems remain a preferred choice for manufacturers seeking to reduce commercialization risk while achieving advanced fiber quality.

Read further here

Solar Atmospheres begins installation of advanced titanium drop bottom furnace in Pennsylvania

Solar Atmospheres, Hermitage, Pennsylvania announced the start of installation for a new titanium drop bottom water quench furnace at its Western PA facility. The furnace is engineered for high-performance heat treatment of titanium components, with a maximum operating temperature of 1850°F ±10°F.

Designed to process loads up to 7,500 pounds, the furnace chamber measures 14 feet in length, 54 inches in width, and 48 inches in height. Workloads will be rapidly transferred into a 7,000-gallon recirculated water quench tank within seconds, ensuring uniform metallurgical properties critical to aerospace and industrial specifications.

The installation represents a strategic investment in expanding the company’s titanium solution treating capabilities. Solar Atmospheres stated that the project reinforces its commitment to delivering precision thermal processing solutions tailored to customer demands in high-performance sectors.

Read further here

 

Daido Steel launches new vacuum arc remelting plant to meet semiconductor industry demand

Daido Steel Co. Ltd., Nagoya, Japan, announced the successful start of operations at its new vacuum arc remelting (VAR) plant at the company’s Chita site. Developed in collaboration with ALD Vacuum Technologies, the plant is designed to increase production capacity for high-purity stainless steels and nickel alloys used in high-performance applications, particularly within the semiconductor industry.

The first VAR plant became operational in December 2024, with finished ingots now undergoing downstream processing. A second remelting unit is scheduled to begin operation in March 2025, with additional capacity expansions planned over the coming years.

The custom-designed VAR plant, supplied by ALD, enables the production of ultra-clean steel with a homogeneous microstructure, meeting the stringent quality standards required for semiconductor components. VAR-processed materials are known for their durability, purity, and consistency, making them ideal for critical industries.

Daido Steel’s investment reflects a strategic move to support the growing global demand for advanced materials in next-generation technologies. The company continues to position itself as a key supplier in the global supply chain for high-performance alloys.

Read further here

 

Consarc and Vulcan elements commission new strip casting furnace to support US. rare earth magnet production

Consarc Corporation, Rancocas, NJ, and Vulcan Elements, Durham, NC, announced the successful delivery and commissioning of a Vacuum Induction Melting Strip Casting Furnace (VIM-SC) at Vulcan’s facility in North Carolina’s Research Triangle Park. This collaboration represents a key step in strengthening domestic capabilities for rare earth magnet production and bolstering U.S. national security and supply chain resilience.

Engineered and manufactured by Consarc in New Jersey, the state-of-the-art VIM-SC furnace is now fully operational and will enable the rapid solidification of Neodymium Iron Boron (NdFeB) alloys. These materials are essential for producing high-performance magnets used in electric vehicles, renewable energy systems, advanced electronics, and defense applications.

Jai Narayan, president of Consarc Corporation, emphasized the company’s role in supporting critical domestic manufacturing. He noted that Consarc’s vacuum induction melting technology is central to reestablishing a secure U.S. base for rare earth magnet production. John Maslin, chief executive officer of Vulcan Elements, highlighted the importance of domestic equipment partners like Consarc in building a resilient and traceable magnet supply chain.

Consarc, the only U.S. supplier of both pilot and production-scale strip casting furnaces, was selected to provide the VIM-SC furnace as Vulcan scales its operations. The partnership reflects a shared mission to revitalize American manufacturing and reinforce supply chain independence in strategic sectors.

Consarc Corporation is part of the Inductotherm Group and brings over 60 years of experience in vacuum and controlled atmosphere furnace technology. Vulcan Elements specializes in the manufacture of permanent sintered NdFeB magnets and is dedicated to advancing innovation and supply chain security for critical U.S. industries.

Read further here

One minute Mentor: Tool Steels Heat Treatment Simulation Example

The potential of high-temperature simulation (HTS) is demonstrated through the case of a low-silicon, vacuum-arc-melted and remelted H11 hot-work tool steel. To validate the HTS model, a cylindrical steel sample with a diameter and length of 100 mm (4 inches) was selected due to the efficiency benefits of using a simplified 2D geometry. The simulation was calibrated using time-temperature-transformation (TTT) diagrams and thermal expansion data obtained from dilatometer experiments. Initial validation focused on comparing simulated phase-transformation behavior with actual dilatometer curves, showing good agreement in key areas such as thermal expansion, austenite formation (with carbides), subsequent contraction, and the transformation kinetics of austenite into martensite, bainite, and pearlite. The model does not currently account for the precipitation of proeutectoid carbides.

For more information, click on the link below (subscription required). Then scroll to Figure 16. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Nitrex division G-M enterprises sees surge in aerospace orders amid market recovery

Nitrex, Quebec, announced that its G-M Enterprises division in Corona, California, is experiencing robust growth, driven by renewed demand in the aerospace sector. 

The division recently secured a significant order from a long-standing aerospace customer for a 6-bar vacuum furnace engineered to meet stringent aerospace manufacturing requirements.

This latest order contributes to a strong fiscal performance for G-M Enterprises in FY2025. The division has already doubled its sales of new hot zone replacements compared to the same period last year, indicating a growing market demand and a sharpened focus on customer engagement.

Mark Hemsath, president of Nitrex and UPC-Marathon, noted that the uptick in aerospace activity is a positive development for the company. He highlighted the strength of G-M Enterprises’ California-based manufacturing capabilities and emphasized the importance of longstanding customer relationships in driving success.

With nearly 40 years of experience in vacuum furnace design and production, G-M Enterprises supports a wide range of applications including additive manufacturing, metal injection molding (MIM), and critical aerospace processes. As part of the Nitrex/UPC-Marathon group, the division leverages integrated heat-treating solutions, automation software, and process control technologies.

As aerospace industry demand continues to rebound, G-M Enterprises is well positioned to deliver high-capacity, precision-engineered systems backed by technical expertise and customer service.

Read further here.

Furukuwa opens new laser processing laboratory in Aichi prefecture to advance industrial solutions

Furukawa Electric Co. Ltd., Tokyo, Japan, and Nichia Corp., Tokushima, Japan, announced that they have jointly opened the Cutting-Edge Laser Processing Solution Laboratory (CELL) in Kariya City, Aichi Prefecture. Located in a key hub of the automotive industry, the new facility is designed to accelerate the development of laser processing technologies and provide innovative solutions to industrial challenges.

The laboratory is equipped with Furukawa Electric’s advanced industrial lasers, including the newly developed 5kW blue laser (BR5000), which delivers world-leading brightness through optical fiber. Plans are in place to install the full range of Furukawa Electric’s industrial lasers, including the BRACE Series of Blue-IR hybrid lasers, enabling the lab to meet diverse customer requirements and expedite process testing and evaluations.

CELL is a collaborative effort between Furukawa Electric and Nichia, facilitating activities that span laser processing and light source development. This partnership will enable the two companies to propose next-generation laser solutions tailored to specific customer needs, with a particular focus on addressing the demands of copper processing for the electrification of mobility.

Both companies are committed to advancing laser technology and supporting the development of innovative production methods, contributing to the evolution of the automotive and related industries.

Read further here: 

One Minute Mentor: Distortion of Corrosion-Resistant Plastic Mold Steels

Corrosion-resistant plastic mold steels are usually tempered at lower tempering temperatures than hot-work, high-alloyed cold-work, or high-speed steels. A comparison of different types of corrosion-resistant plastic mold steels with the widely used cold-work tool steel D2 with the same dimensions as in the previous example for cold-work tool steels for such heat treatment conditions can be seen in the figure and shows that all steels show a similar low dimension change in width. Regarding the thickness of the plates there is a significantly higher increase for the ledeburitic cold-work tool steel. Vacuum heat treatment with high-pressure gas quenching leads to a similar amount of distortion as salt bath heat treatments but again shows significant scatter.

For more information, click on the link below (subscription required). Then scroll to Figure 13. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

Constellium honored with supplier of the year award from stellantis for csr excellence

Constellium, Paris, announced that it has been awarded the Supplier of the Year Award by Stellantis, recognizing the company’s strong commitment to corporate social responsibility (CSR). This honor reflects Constellium’s dedication to high CSR standards in both its operations and supply chain, which has earned positive ratings from several international rating agencies. A long-standing supplier for Stellantis brands, Constellium provides aluminum body sheet products and extrusion-based structural solutions for various vehicle platforms across Europe and the U.S.

Constellium’s approach to sustainability has been acknowledged by independent organizations, including EcoVadis, the Carbon Disclosure Project (CDP), MSCI ESG Ratings, and ISS-Oekom. As a founding member of the Aluminium Stewardship Initiative (ASI), Constellium recently achieved ASI Performance Standard Certification for all global operations.

Ingrid Joerg, executive vice president and chief operating officer at Constellium, expressed pride in the award from Stellantis, noting that it underscores the company’s dedication to responsible purchasing and sustainable solutions. The award was presented at Stellantis’s annual event in Turin, Italy, where Maxime Picat, stellantis chief purchasing and supply chain officer, emphasized the critical role of suppliers in supporting Stellantis’s growth through their commitment to quality and collaboration. Constellium, dedicated to delivering sustainable aluminum products, publishes annual sustainability reports to highlight its progress and results in this area

Read further here.

Ipsen USA launches service HUB Model for improved customer support

Ipsen USA, Cherry Valley, Illinois, announced the launch of its new Service HUB model, aimed at enhancing customer support across the United States. The HUB system, developed over the past two years under the leadership of Ipsen Global CEO Geoffrey Somary and currently overseen by Chief Service Officer John Dykstra, is now fully operational across the Midwest and Southeastern regions.

The HUBs are designed to offer quicker response times, with dedicated teams that provide tailored service for customers in close geographic proximity. This model allows Ipsen to optimize service efficiency, reducing downtime for heat-treating operations and improving customer experience.

In addition to benefiting customers, the HUB model also enhances the work-life balance of Ipsen’s Field Service Engineers (FSEs) by reducing travel time. The initiative is led by Lu Chouraki, Manager of Business Development, who emphasized the goal of minimizing response times and improving support for customers facing operational outages.

This strategic shift reflects Ipsen’s commitment to service excellence, offering personalized, regional expertise that both empowers its team and delivers enhanced support to customers.

Read further here. 

Nitrex celebrates 40 Years of innovation in heat treatment solutions

Nitrex, Quebec, announced that it is celebrating its 40th anniversary this year, marking four decades of growth and innovation in the heat treatment industry. Founded in 1984, Nitrex has evolved from a pioneer in controlled nitriding to a global leader offering end-to-end heat treatment solutions. The company’s technological advancements have expanded its capabilities to encompass metallurgy, engineering, process optimization, and automation.

Since 2019, under the current leadership, Nitrex has broadened its portfolio to include advanced vacuum furnaces and introduced technology for improved brake rotor performance. The company has also launched digital platforms such as QMULUS, aimed at optimizing customer processes and boosting operational efficiency.

In addition to its own milestone, Nitrex is celebrating the 50th anniversary of its UPC-Marathon office in Germany, recognizing the long-standing contributions and achievements of its global team. These anniversaries reflect Nitrex’s ongoing commitment to innovation and excellence.

Read further here.

Furukawa Electric announces simplified absorption-type split for Optical Fiber and Cable products business

Furukawa Electric Co., Ltd., announced that its Board of Directors has approved a reorganization plan to streamline its optical fiber and cable products business. The company will establish a new wholly-owned subsidiary, referred to as the “New Company,” which will succeed its optical fiber and cable business through an absorption-type split. Additionally, the new company will assume the shares of Shoden Seiwa Co., Ltd., a subsidiary engaged in optical fiber and cable products.

To support this restructuring, Furukawa Electric will create another subsidiary, the “Holding Company,” to manage its global optical fiber operations, including OFS Fitel, LLC in the U.S. and Furukawa Electric LatAm S.A. in Brazil. The reorganization aims to integrate the company’s operations more efficiently on a global scale.

The split, effective April 1, 2025, is intended to strengthen Furukawa’s market position and enhance its ability to respond to evolving industry challenges while maintaining its focus on innovation and operational efficiency.

Read further here

Ipsen announces launch of field service engineer academy

Ipsen, Cherry Valley, IL, has announced the launch of its Field Service Engineer (FSE) Academy, a 20-week training program aimed at strengthening the Ipsen Customer Service (ICS) Team. The program includes both classroom instruction at the company’s TDC facility in Cherry Valley, Illinois, and hands-on field training with veteran technicians. While primarily designed for new hires, experienced engineers can also participate, with regional service managers directing them to specific modules based on their skill level assessments.

The academy will focus on the fundamentals of vacuum furnace repair, giving technicians a comprehensive understanding of Ipsen’s equipment and customer applications. Technical Training Lead Cavan Cardenas noted, “From day one, we want our technicians to grasp how our products work and their purpose in the field.”

In addition to technical training, the program will develop soft skills and address the demands of a service-driven role, preparing recruits for a dynamic, on-the-road service environment.

Read further here.

One Minute Mentor: Distortion in Tool Steels

Some of the main interactions  that occur during the heat treatment of steel alloys including temperature, microstructure, and stress/strain. Especially for tool steels these interactions are mainly influenced by the carbon content in the steel matrix, the types and relative amounts of the alloying elements, and the carbide formation/transformation/precipitation characteristics of the alloy system.

Heat treatment involves changes of temperature with time, which determine changes in microstructure. The rate of temperature change results in a change of microstructure which is described by phase transformation kinetics, as in e.g. TTT (time-temperature-transformation) diagrams; every phase transformation releases/absorbs latent heat, which influences the temperature field. An inhomogeneous temperature distribution, i.e. temperature gradients, within the tool during heat treatment can generate thermal stresses that lead to plastic deformation, if the yield strength of the material at that temperature is exceeded. Every mechanical deformation generates heat which, in turn, influences the temperature field. Furthermore, there is an interaction between the stress state and the microstructure. Phase transformations can result in micro-plastic deformation, which can be globally described using transformation plasticity models.

For more information, click on the link below (subscription required). Then scroll to Figure 2. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014  https://doi.org/10.31399/asm.hb.v04d.a0005980

 

Harper International Receives Order for Scientific Line for Pitch Carbon Fiber

Harper International, Buffalo, NY, announces that it has been awarded a contract to engineer and manufacture a Scientific Line for the production of Bitumen Pitch Carbon, which will be installed at Alberta Innovates, located in Edmonton, Alberta, Canada. The facility will be operated by InnoTech Alberta, a wholly-owned subsidiary of Alberta Innovates. The equipment delivery and start-up services are scheduled for 2025.

This pilot-scale equipment will be used by researchers as part of the Carbon Fibre Grand Challenge launched by Alberta Innovates. The challenge aims to accelerate the development of large-scale production pathways for short and continuous carbon fiber from bitumen-derived feedstocks. Phase III of the competition will allow projects to demonstrate, in a repeatable manner, the ability to manufacture carbon fiber, incorporate it into prototypes, and understand the techno-economics associated with the designed process.

“Harper is pleased to support Alberta Innovates Carbon Fibre Grand Challenge to successfully create an alternative carbon fiber precursor with our customized Scientific Line. Carbon fiber from bitumen-derived precursor will significantly lower the price and have a smaller environmental impact,” says Briana Tom, Harper Sales Engineer.

Harper International is a world leader in thermal processing solutions for advanced materials. This latest contract highlights their commitment to innovation and supporting sustainable advancements in material science.

Read further here.

SECO/WARWICK finds the way to complete successful projects in Brazil

Seco/Warwick, Meadville, Pa., announced a significant milestone in its operations in Brazil. The company has successfully implemented a solution for Nitrion do Brasil, a leading commercial heat treater in South America, in their new production hall to manage the increasing order volume. This achievement underscores the strong synergy between SECO/WARWICK and its strategic partner in the region, Combustol.

SECO/WARWICK’s presence in Brazil has seen dynamic sales growth and promising market forecasts, driven by their popular Vector single-chamber vacuum furnaces. These furnaces are highly favored by commercial heat treaters in the region for their ability to enhance the hardening process and improve economic efficiency. The successful collaboration with Combustol has been instrumental, providing not only sales support but also service activities and the supply of spare parts, which has given SECO/WARWICK a competitive edge.

The Vector vacuum furnace ordered by Nitrion do Brasil is designed to address the challenge of hardening larger elements, thanks to its spacious working area. This feature enhances process economics through energy savings and increased efficiency of the graphite chamber, while also ensuring process cleanliness and speed. The furnace’s convection heating system improves heat transfer efficiency at lower temperatures, and its directional cooling system allows for effective cooling of parts with complex shapes.

Read further here.

Constellium has announced new initiative to boost circularity of beverage cans

Constellium, Paris, has announced an initiative to enhance the circularity of beverage cans. In collaboration with three leading flat-rolled aluminium manufacturers and members of the European Aluminium Packaging Group (EAPG) – Elval, Novelis, and Speira – Constellium has signed an agreement to embark on a standardization project aimed at maximizing the recycled content in beverage cans. This initiative is a significant step towards substantially lowering carbon emissions by focusing on the increased recyclability of the can end.

This collaborative effort underscores the aluminium industry’s commitment to sustainability. By increasing the recycled content in beverage cans, the project aims to significantly reduce the carbon footprint associated with aluminium production. The focus on recyclability and circularity not only benefits the environment but also sets a new standard for sustainability within the industry.

By prioritizing these eco-friendly practices, Constellium and its partners are paving the way for a more sustainable future in aluminium production, highlighting the importance of innovation and collaboration in achieving environmental goals.

Read further here. 

Solar Atmospheres acquires Certified Metal Craft Inc.

Solar Atmospheres, El Cajon, CA, , has announced the acquisition of Certified Metal Craft (CMC) based in El Cajon, California. This move marks Solar Atmospheres’ sixth nationwide location and enhances its presence on the West Coast.

Founded nearly 55 years ago, CMC has been a reputable and trusted service provider in the Southern California region, specializing in various heat treating processes including Vacuum, Aluminum, Atmospheric, Endothermic, Salt Bath, and Cryogenic processing. The company’s dedication to quality has earned it a Nadcap accreditation and a robust portfolio of customer and prime approvals in the Aerospace, Medical, and Commercial sectors.

This expansion not only solidifies Solar Atmospheres’ commitment to providing top-notch heat treating and brazing solutions but also underscores its industry-leading approach of integrity and honesty in all business dealings. The integration promises to bolster Solar’s operational capabilities and enhance its service offerings across the West Coast, ensuring that the company remains the “go-to” choice for clients in the sector.

Read further here.