Category: News Articles

Bodycote, Macclesfield, U.K, announced the appointment of Jim Fairbairn as the new Group Chief Executive, succeeding Stephen Harris upon his retirement. Fairbairn is set to join the company and its Board in March 2024 and will assume the role of Group Chief Executive in May 2024, following a structured transition period. Stephen Harris will retire and step down from the Board at the Annual General Meeting on May 31, 2024. Jim Fairbairn, 54, brings a

The continuous heat treatment of tool steel is applied to low- or medium-alloyed carbon steel strips as well as martensitic stainless steels. The described lines produce high-quality strip with respect to uniform structure, flatness, and bright surface finish. Steel grades with 0.4 to 1.2% C, low and high alloyed, can be processed.  Strip dimensions range between 10 to 750 mm (0.4 to 29.5 in.) wide and 0.05 to 4 mm (0.002 to 0.16 in.) thick.

Wisconsin Oven, East Troy, WI, announced the shipment of two Electrically Heated Horizontal Quench Systems to the semiconductor industry. These systems are designed for the annealing and rapid cooling of various high purity alloy parts. The operation of each horizontal quench system begins with loading the product onto a work grid located on the loading platform. After the load is lifted into position, a pusher/extractor mechanism at the front of the quench tank moves the

Ipsen, Cherry Valley, IL, has successfully achieved ISO/IEC 17025:2017 accreditation for calibrations, enhancing its pyrometry services. This accreditation is particularly significant for customers operating under the National Aerospace and Defense Contractors Accreditation Program (NADCAP) and Aerospace Material Specifications (AMS) 2750G. A key update in AMS2750G, revised in 2022, mandates that calibration service providers must hold ISO/IEC 17025:2017 accreditation. This requirement encompasses temperature controller calibration, system accuracy testing (SAT), and temperature uniformity surveys (TUS). Cavan Cardenas,

Solar Atmospheres, Greenville, SC, has announced the acquisition of a new 10-bar vacuum furnace for its Greenville, SC facility. Manufactured by Solar Manufacturing, this new horizontal vacuum furnace measures 48 inches wide, 48 inches high, and 96 inches deep. It is designed to handle loads up to 12,000 pounds and is scheduled for installation in late 2024. The furnace will be equipped with a vacuum pumping system capable of achieving an ultimate vacuum of 1×10-6

One of the major attributes of the fluidized bed is the high rate at which heat can be transferred from the bed of particles to an immersed object. Coefficients of heat transfer on the order of 400 to 740 W/m2 · K (70 to 130 Btu/ft2 · h · °F) are possible. This heat flow rate is two to ten times higher than that provided by normal convection or radiation. In addition, the rate of