Toyota Research Institute (TRI) and Northwestern University announce their collaboration to help accelerate new materials discovery, design, and development with the world’s first nanomaterial “data factory.”
Continue readingUMaine awarded NSF MRI grant to update instrumentation for climate, environment, ecosystem, and engineering research
The National Science Foundation awarded a $661,462 Major Research Instrumentation grant to the University of Maine to upgrade a multiuser instrument in the Climate Change Institute.
Continue readingAFRL experiments with heat flow to manipulate quantum materials
The Air Force Research Laboratory, or AFRL, Nano Electronic Materials Branch, used heat flow experiments to manipulate quantum materials into functioning in new and different ways at higher temperatures.
Continue readingLos Alamos National Laboratory to lead study of molten-salt nuclear reactor materials
Los Alamos National Laboratory has been selected by the Department of Energy as the lead on a $9.25 million, five-year collaborative project in nuclear energy research. The Scientific Discovery through Advanced Computing (SciDAC) program aims to advance modeling the behavior and properties of structural materials under molten salt conditions by using high-performance computing.
Continue readingOne Minute Mentor: Salt Bath Furnaces
Molten salts of various compositions are well adapted to all operations in the heat treatment of tool steels. For tools that cannot be ground after hardening or for tools that require an excellent surface condition and the maintenance of sharp edges, salt bath heating provides excellent results.
Continue readingWisconsin Oven ships conveyor oven to the automotive industry
Wisconsin Oven, East Troy, has announced the shipment of a gas-fired chain conveyor oven to a manufacturer in the automotive industry. This oven will be used for tempering automotive transmission shafts.
Continue readingSeco/Vacuum ships Vector vacuum furnace for specialized nuclear operations
Seco/Vacuum, Pa., has shipped a single chamber high-pressure quench vacuum furnace, the Vector, to be utilized for a variety of heat-treating processes, including hardening of tool steels as well as high vacuum sintering and annealing.
Continue readingLindberg ships exothermic gas atmosphere generator to the manufacturing industry
Lindberg/MPH, MI, has announced the shipment of one gas-fired Exothermic atmosphere generator to the manufacturing industry.This exothermic generator features an energy efficient design that provides reliable and economic operation.
Continue readingDoD announces first set of projects to receive funding from the Accelerate the Procurement and Fielding of Innovative Technologies program
The United States Office of the Under Secretary of Defense for Research and Engineering (OUSD(R&E)) announced the first set of projects to receive funding via the pilot program to Accelerate the Procurement and Fielding of Innovative Technologies.
Continue readingWall Colmonoy Alloy Products U.S. receives best quality award from Cataler
Wall Colmonoy’s Alloy Products U.S. division, Madison Heights, Mich., received Cataler’s Best Quality Award for zero defects in 2021 for its Nicrobraz 30 nickel-brazing powder.
Continue readingHöganäs divesting Digital Metal
Höganäs, Sweden, signed an agreement to divest Digital Metal, a market leading binder-jetting AM technology producer and one of Höganäs’ affiliated companies, to Markforged, a company headquartered in Watertown, Mass.
Continue readingSpray Tips: Relationship between particle melting and coating structure
In addition to the effects of particles in the periphery of the spray stream resulting from poorly classified materials or non-optimized process parameters, consideration should be given to particles in the spray stream and how variations in the degree of melting and velocity affect coating structure.
Continue readingNew materials research sees transformations at an atomic level
A new study uses transmission electron microscopy (TEM) to peer into the oxide-to-metal transformation at the atomic level.
Continue readingSingapore researchers give 2D electronics a performance boost
Despite the potential that 2D semiconductors possess in replacing conventional semiconducting materials like silicon in the future, one key challenge remains: their low carrier mobility at room temperature, caused by strong scattering between electrons and phonons.
Continue readingOne Minute Mentor: Preheating for Austenitizing
Preheating normally is employed as a safeguard against the cracking and extreme distortion resulting from the thermal shock undergone by a cold workpiece when it is exposed to the high temperature of the austenitizing furnace.
Continue readingPerryman Company expands titanium melting capacity by 60%
Perryman Company, Houston, Pa., will substantially increase its titanium melting capacity through additional electron beam and vacuum arc remelt furnaces. The furnaces will be located in Washington County, Pa.
Continue readingSteel Dynamics announces new state-of-the-art low carbon aluminum flat rolled mill
Steel Dynamics, Fort Wayne, Ind, announced that it will construct and operate a 650,000-tonne low-carbon, recycled aluminum flat rolled mill, with two supporting satellite recycled aluminum slab centers. The capital investment is estimated to be $2.2 billion for the three facilities, and commercial production is planned to begin in the first quarter 2025.
Continue readingConstellium achieves highest EcoVadis Platinum sustainability rating
Constellium, Paris, has received a Platinum rating from EcoVadis, a leading provider of business sustainability ratings, for a consecutive time. EcoVadis places the company in the top 1% of the 90,000 companies assessed worldwide.
Continue readingNitrex delivers vacuum furnace to international aircraft provider
Nitrex Vacuum, Quebec, recently shipped a new large vertical vacuum furnace to a major aircraft engine maintenance, repair, and overhaul facility in South America. The system was purchased to modernize the plant, meet quality standards and accreditations, and produce specially designed recipes.
Continue readingOne Minute Mentor: Austenitizing
Austenitizing is the most critical of all heating operations performed on tool steels. Along with quenching it will usually be referred to as the hardening step in tool steel heat treatment and, associated with tempering, will be responsible for the final properties.
Continue readingAddUp Partners with the ECM Group to Offer Post Additive Manufacturing Heat Treatment Solutions
ECM Technologies, France, has signed a partnership to develop high value-added solutions for the thermal treatment of 3D printed metal parts with AddUp, a major player in the field of metal additive manufacturing.
Continue readingSeco/Warwick to produce specialized dies for motorcycle parts
Seco/Warwick, Poland, will supply a Vector vacuum furnace to Atlas Autos Ltd, the largest manufacturer of motorcycle parts in Pakistan. The solution is intended for hardening and tempering processes, and its design will allow for gas cooling elements and dies for parts used in automotive production.
Continue readingStudents from Lehigh University tour Solar Atmospheres
Solar Atmospheres, Souderton, Pa., hosted over 40 high school students enrolled in the Summer Engineering Institute (SEI) at Lehigh University. The SEI program, under the guidance of Laura Moyer, is a two-week residential program, running two sessions back to back.
Continue readingMatexcel unveils physical metallography and microscopic analysis service
Scientists in the research field of metal analysis now have access to Matexcel’s Physical Metallography and Microscopic Analysis service which was recently released.
Continue readingNorman Noble, Inc. adds dedicated support for EU MDR regulated customers
Norman Noble, Highland Heights, OH, has added dedicated staff to its Quality team to support the critical needs of customers supplying the European market. Quality Assurance Resources provide support for meeting the new European Union Medical Device Regulation requirements, such as chemical reporting and conflict mineral reporting.
Continue readingNanostructured zinc nickel coating system for oil and gas industries
Integran Technologies, Inc., Canada, Dipsol of America, Inc, Livonia, Michigan, and Sigma Fasteners, Inc., Houston, TX, announce their agreements to expand access to Nanostructured Zinc-Nickel fastener and bolting products for the oil and gas industries worldwide.
Continue readingSPEE3D releases new high velocity Phaser nozzle for world’s fastest metal printer
SPEE3D, Australia, released the Phaser nozzle at the Cold Spray Action Team 2022 Conference in Worchester, Mass.–a new ultra high energy nozzle designed to work with a wider range of hard phase materials, and with a significant increase in deposition velocity.
Continue readingAutomating semiconductor research with machine learning
The development of new thin semiconductor materials requires a quantitative analysis of a large amount of reflection high-energy electron diffraction (RHEED) data, which is time consuming and requires expertise. To tackle this issue, scientists from Tokyo University of Science identify machine learning techniques that can help automate RHEED data analysis.
Continue readingScientists serendipitously discover rare cluster compound
Scientists at Kyoto University’s Institute for Cell-Material Sciences have discovered a novel cluster compound that could prove useful as a catalyst.
Continue readingNew device allows for production of chameleon metal
Researchers have invented a device that electronically converts one metal so that it behaves like another for use as a catalyst in chemical reactions. The device, called a “catalytic condenser,” is the first to demonstrate that alternative materials that are electronically modified to provide new properties can yield faster, more efficient chemical processing.
Continue reading




























