Integer Holdings , Plano, TX, announced the acquisition of Connemara Biomedical Holdings Teoranta, including its operating subsidiaries Aran Biomedical and Proxy Biomedical (collectively “Aran” or “Aran Biomedical”).
Continue readingJohnson Matthey invests 50 million Euro at its Clean Air plant
Johnson Matthey held a groundbreaking event today to celebrate the start of construction at its plant in Gliwice, Poland. The 18-month project is to build a new line creating up to 50 new jobs.
Continue readingFokker Services unveils new component maintenance technology
Fokker Services, an Independent Aerospace Service Provider, has installed new, fully automated twin wire electric arc spray technology at its LaGrange, Ga., facility.
Continue readingPicosun ALD demonstrates effective surface protection for materials in space conditions
The atomic layer deposition process from Picosun, Finland, has been demonstrated to be a suitable solution for protection of surfaces exposed to atomic oxygen degradation in low-Earth orbit.
Continue readingSpray Tips – The coating deposition spray stream
The spray stream is fundamental to understanding thermal spray coatings.
Continue readingOne Minute Mentor: Nitriding
Powder metallurgy parts can be nitrided using alkali salts, gases, and plasmas, with the majority of applications using gases. Alkali salts can be used in some applications, because trapped salts may not be detrimental if the part is constantly immersed in oil during service.
Continue readingCAN-ENG furnaces deliver another mesh belt heat treatment system to overseas customer
CAN-ENG Furnaces International, Niagara Falls, Ontario, has shipped a 1800 kg/hr continuous mesh belt heat treatment system for an existing customer located in the Piedmont Region of Italy.
Continue readingEFD Induction offers accommodation to family fleeing Ukraine
EFD Induction, Germany, has opened their doors for a small family fleeing from the war in Ukraine. The married couple with a young son has been given one of the company’s apartments as accommodation.
Continue readingHarper International receives contract for graphite purification furnace systems
Harper International, Buffalo, has announced that it has entered an equipment supply agreement with Westwater Resources Inc. to produce custom-engineered systems for thermal purification of natural graphite.
Continue readingDouglass R. Brown, president of Inductoheat, to retire
Inductoheat, Madison Heights, Mich., announced that Douglass R. Brown will retire as the president of Inductoheat after 42 years of service.
Continue readingJohns Hopkins team accelerates testing time for next-generation alloys
A Johns Hopkins materials science and engineering professor is leading a multi-university team of researchers with a mission to expedite the process by which new and important materials are created for use by the U.S. Navy in a variety of applications, from hypersonic vehicles to batteries.
Continue readingNew strategy for designing thermoelectric materials
The National Institute for Materials Science (NIMS) has succeeded in developing a new approach to the design of thermoelectric materials by constructing a database of electronic structure parameters correlated with materials’ thermoelectric conversion properties and by a comprehensive analysis of the database.
Continue readingNew tool allows unprecedented modeling of magnetic nanoparticles
Researchers at North Carolina State University have developed a new computational tool that allows users to conduct simulations of multi-functional magnetic nanoparticles in unprecedented detail. The advance paves the way for new work aimed at developing magnetic nanoparticles for use in applications from drug delivery to sensor technologies.
Continue readingMaterials scientists finding solutions to biggest hurdle for solar cell technology
Materials scientists at the UCLA Samueli School of Engineering and colleagues from five other universities around the world have discovered the major reason why perovskite solar cells, which show great promise for improved energy-conversion efficiency, degrade in sunlight, causing their performance to suffer over time.
Continue readingOne Minute Mentor: Carbonitriding
Carbonitriding is a modified form of gas carburizing that uses additions of up to 10% ammonia into the gas carburizing atmosphere resulting in adding nitrogen to the carburized case. It produces a more consistent surface hardness profile, which improves wear resistance and toughness of the PM steel.
Continue readingWisconsin Oven ships natural gas fired conveyor oven to the transportation industry
Wisconsin Oven, East Troy, Wis., has announced the shipment of one natural gas fired conveyor oven to the transportation industry. Designed to cure contoured plastic parts, this oven has a maximum temperature of 500°F and its normal operating temperature is 350°F.
Continue readingConstellium restarts upgraded cold mill at Ravenswood Facility
Constellium, Paris, restarted its upgraded 144-inch cold rolling mill at its facility in Ravenswood, West Virginia in the presence of senator Shelley Moore Capito and the deputy assistant secretary of defense for industrial policy, Jesse Salazar.
Continue readingLindberg/MPH ships two electrically heated nitrogen pit furnaces to the manufacturing industry
Lindberg/MPH, Riverside, Mich., announced the shipment of two electrically heated nitrogen pit furnaces to the manufacturing industry. These furnaces are configured for process applications requiring a maximum furnace temperature of 1250°F in a nitrogen atmosphere.
Continue readingIpsen expands services with vacuum chamber wall thickness testing
Ipsen, Cherry Valley, Ill., has expanded its field service capabilities to include ultrasonic wall thickness testing for vacuum furnaces. The test helps customers verify the integrity of their chamber and determine its remaining lifespan.
Continue readingCreating coatings for extreme environments: from solar shields to hypersonic leading edges
Researchers at the Johns Hopkins Applied Physics Laboratory in Laurel, Md, are developing coatings that can stand up to the rigors of hypersonic flight in the upper atmosphere.
Continue readingUsing modern flame spray technology to metallize capacitors, or schoopage
Saint-Gobain, Worcester, Mass., offers the Master Jet Auto IV thermal flame spray gun, flame spray technology with a proprietary cooling system that can achieve low heat input that is crucial to avoid heat build-up and distortions in metalized film coatings.
Continue readingMingo Aerospace achieves Nadcap accreditation
Mingo Aerospace, Owasso, Okla., announced that it has successfully been granted 18-month merit for Nadcap accreditation for Coatings—Thermal Spray and Grinding, AC710/1 and AC7109/8.
Continue readingSpray Tips – Masking holes and complex geometries
In addition to tape masks, other masking techniques are used for holes and complex geometries.
Continue readingNew synthetic tooth enamel is harder and stronger than the real thing
Delivering what has been so challenging to produce, researchers present an engineered analog of tooth enamel – an ideal model for designing biomimetic materials – designed to closely mimic the composition and structure of biological teeth’s hard mineralized outer layer. It demonstrates exceptional mechanical properties.
Continue readingResearchers develop methodology for streamlined control of material deformation
The results of this paper rely on the novel observation that these maximally auxetic metamaterials deform conformally, which the researchers confirmed with a high degree of accuracy. This means that any angle drawn on the material before and after deformation will still look like the same angle. This seemingly mundane observation activates powerful mathematical structures.
Continue readingDeveloping more corrosion-resistant steel fences
The Innovative Manufacturing CRC, an Australian independent, for-impact cooperative research center, along with Australian industry partner InfraBuild and research organization CSIRO, Australia’s national science agency, has made a manufacturing investment of $904,512 AUD for a 2021-22 research project to advance its manufacturing processes and explore alternative coating options that allow them to produce more damage and corrosion-resistant fencing products.
Continue readingLippert introduces Road Defense powder coating technology
Lippert Components Inc., Eklhart, Ind., announced it is upgrading the formula for all powder coatings on chassis out of the Goshen and Middlebury locations, which serves all of its OEM customers.
Continue readingPhillips Federal expands Rock Island Arsenal additive manufacturing capability with a WarpSPEE3D machine
Phillips Federal, Hanover, Md., has acquired a new WarpSPEE3D Metal AM printer from SPEE3D, Austria, to be located at their Center of Innovation at the at the Rock Island Arsenal’s Additive Manufacturing Center of Excellence.
Continue readingSpray Tips – Masking
Various masking techniques have been developed to protect components next to the coating area from impact by overspray particles including shadow masks, high-temperature tapes, and paint-on masking compounds.
Continue readingConcordia receives $1.9M for transformative coatings research
The Government of Canada has committed $24 million through the New Frontiers in Research Fund for a project led by Queen’s University in Kingston, Ontario, poised to extend the lifespan of metals.
Continue reading




























