Researchers have known about high-temperature superconducting copper-based materials, or cuprates, since 1980. Below a certain temperature (approximately -130 degrees Celsius), electrical resistance vanishes from these materials and magnetic flux fields are expelled. However, the basis for that superconductivity continues to be debated and explored.
Continue readingResearch collaboration to accelerate heterogeneous chip integration with hybrid bonding technology
Applied Materials Inc., Santa Clara, Calif., and the Institute of Microelectronics, a research institute of Singapore’s Agency for Science, Technology and Research, announced a new phase of their research collaboration at the Center of Excellence in Advanced Packaging in Singapore.
Continue readingFormFactor opens new manufacturing facility to expand capacity for semiconductor wafer probe card production
FormFactor Inc., Livermore, Calif., a leading semiconductor test and measurement supplier, announced the opening of a new manufacturing facility, expanding its Livermore campus.
Continue readingIntegrated Global Services acquires Amstar
Integrated Global Services, Inc., Richmond, Va., a leading provider of thermal spray surface protection solutions, has acquired GE Steam Power’s on-site thermal spray coatings technology, AmStar.
Continue readingBuffalo Tungsten’s WC thermal spray powders improve efficiency and performance
Buffalo Tungsten’s latest R&D project for WC thermal spray powder has led to big improvements and new and improved powder products planned to launch in the first quarter of 2022 that will help all material users see better results in their surface coatings.
Continue readingOerlikon’s new state-of-the-art laser cladding center now operational
Oerlikon Metco Coating Services announced its new laser cladding service center is fully operational in Huntersville, N.C., a suburb of Charlotte.
Continue readingUsing Superconducting Materials to Create Invisibility
Invisibility devices may soon no longer be the stuff of science fiction. A new study published in the De Gruyter journal Nanophotonics by lead authors Huanyang Chen at Xiamen University, China, and Qiaoliang Bao, suggests the use of the material Molybdenum Trioxide (a-MoO3) to replace expensive and difficult to produce metamaterials in the emerging technology of novel optical devices.
Continue readingSelf-healing nanomaterials usable in solar panels and other electronic devices
The field of self-repairing materials is rapidly expanding, and what used to be science fiction might soon become reality, thanks to Technion — Israel Institute of Technology scientists who developed eco-friendly nanocrystal semiconductors capable of self-healing.
Continue readingSamsung Electronics announces new advanced semiconductor fab in Texas
Samsung Electronics Co., Ltd., South Korea, a world leader in advanced semiconductor technology, announced that it would build a new semiconductor manufacturing facility in Taylor, Texas.
Continue readingFlame Spray Technologies releases new rGun – rotating plasma gun thermal spray unit
Flame Spray Technologies BV, Netherlands, released its new rGun, a rotating plasma gun that improves the capabilities of a standard plasma gun by providing continuous rotation of the attached plasma gun during the spray operation.
Continue readingGTP discontinues highly specialized thermal spray powders
Global Tungsten & Powders, Towanda, Pa., streamlines its product portfolio, discontinues highly specialized thermal spray powders.
Continue readingSpray Tips – Machining and macroroughening
Macroroughening is usually accomplished by machining grooves or threads into the surface to be sprayed.
Continue readingHitemco facility expansion will better serve the aerospace industry
Hitemco, Old Bethpage, N.Y., completed a 10,000-square-foot expansion to be able to take on more projects that keep the military, commercial, and private aerospace sectors running smoothly.
Continue readingStudy challenges standard ideas about piezoelectricity in ferroelectric crystals
For years, researchers believed that the smaller the domain size in a ferroelectric crystal, the greater the piezoelectric properties of the material. However, recent findings by Penn State researchers have raised questions about this standard rule.
Continue readingCrystal-clear images reveal secrets of energy-efficient catalysts and novel materials
To develop new materials and improve the efficiency of the chemical transformations that will someday provide renewable energy for our homes and businesses, scientists and engineers at Pacific Northwest National Laboratory, Richland, Wash., worked with building architects to design a space within the new Energy Sciences Center that is protected from magnetic fields, vibrations, and temperature fluctuations that can cause distorted images.
Continue reading3D printing nanoresonators: toward miniaturized and multifunctional sensors
Collaborating researchers from the Politecnico di Torino, Italy, and the Hebrew University of Jerusalem, Israel, 3D printed mechanical nanoresonators with properties such as quality factor, published stability, mass sensitivity, and strength comparable to those of silicon resonators.
Continue readingForge Nano’s Denver innovation campus continues expansion one year later
Forge Nano Inc., Denver, completed its surface engineering innovation campus in Denver in 2020, and one year later, it continues to expand the facility with its new 40,000 sq. ft. facility in Thornton.
Continue readingLam Research to open new semiconductor equipment manufacturing facility in Oregon
Lam Research Corp., Fremont, Calif., announced the expansion of a new 45,000 square foot manufacturing facility in the city of Sherwood, Ore. planned to open in December 2021.
Continue readingQuesTek’s single crystal nickel answers the Department of Energy’s call
Nickel-based superalloys are used in hot gas path components in gas turbines due to their excellent creep resistance. To achieve their maximum mechanical capability, these materials must be cast as single crystals. However, prior to funding research into the development of castable, single-crystal nickel-based superalloys, the industry typically utilized conventionally cast or directionally solidified blades.
Continue readingHöganäs closes its production in Niagara Falls due to hydrogen gas supply shortage
Due to an unexpected hydrogen gas supply shortage, an essential part in the production of metal powder, Höganäs is forced to close its production in Niagara Falls, N.Y., leading to the redundancy of 33 full-time employees.
Continue readingOptomec delivers $1 million metal additive system for production repair of turbines
Optomec, Albuquerque, N.M., announced the delivery of a multifunctional additive manufacturing machine to a leading supplier to the $37 billion worldwide aviation engine maintenance repair and overhaul market.
Continue readingControlling light with a material three atoms thick
Scientists use high-tech methods to control light in the laboratory, and now, thanks to a new breakthrough that uses a specialized material only three atoms thick, they can control light more precisely than ever before.
Continue readingHeterostructures of atomically thin layers help control heat transfer
Researchers from Tokyo Metropolitan University have found new ways of controlling how heat flows through thin materials by stacking atomically thin layers of atoms into van der Waals heterostructures. By comparing different stacks of different materials, or even the same material after heat treatment, they found that weak coupling and mismatch between layers helped significantly reduce heat transport.
Continue readingEngineers develop flexible, self-healing material to protect steel from the elements
An insulator of sulfur and selenium made with flexible devices in mind may have found its true destiny: As an anticorrosive coating for steel. The compound developed by the Rice University lab of materials scientist Pulickel Ajayan proved itself more dielectric (insulating) than most flexible materials and more flexible than most dielectrics, making it a good candidate for components in electronics like bendable cellphones.
Continue reading$18M NSF grant to build national semiconductor fabrication facility
Engineering researchers led by Distinguished Professor Alan Mantooth have received $18 million from the National Science Foundation to build and operate a national silicon carbide research and fabrication facility in Fayetteville, Ark. at the University of Arkansas.
Continue readingRefuting a 70-year-old approach to predicting material microstructure
Professors Gregory Rohrer and Robert Suter of Carnegie Mellon University’s have uncovered new information that will help materials scientists to predict how the properties of materials change in response to stressors such as elevated temperatures.
Continue readingArgonne materials scientists pursue a new generation of batteries
Applied research at the U.S. Department of Energy’s (DOE) Argonne National Laboratory suggests that replacing lithium-ion batteries with better technology may be possible sooner than expected.
Continue readingSpray Tips – Grit blasting equipment for surface preparation
There are three basic types of grit-blasting equipment: pressure machines or pressure pots, suction-type nozzles, and centrifugal or airless blasting machines.
Continue readingVRC Metal releases new metal powder spray nozzle
VRC Metal Systems, Box Elder, S.D., has released a new nozzle for spraying metal powders with its high-pressure cold-spray systems. The new cold-spray nozzle is great for large-scale projects and gets them done in half the time.
Continue readingFirst glimpse of hydrodynamic electron flow in 3D materials
A team of researchers from Harvard and MIT developed a theory to explain how hydrodynamic electron flow could occur in 3D materials and observed it for the first time using a new imaging technique.
Continue reading




























