New approach to preventing embrittlement could be useful in nuclear reactors.
Continue readingIMS Sorby Award presented to Prof. Frank Mücklich – Director, Materials Engineering Center Saarland (MECS), Research Center of the Steinbeis Foundation, Saarbrücken, Germany
The Henry Clifton Sorby Award is presented annually to recognize lifetime achievement in the field of metallurgy. Recipients are acknowledged for 25 years or more of dedication to research, teaching, or laboratory sales and service.
Continue readingGranta Design materials/processes database inspires and educates engineers and designers
Granta Design Ltd., England, offers university educators and students the new CES EduPack, “Products, Materials, and Processes Database,” which includes both the Designer’s View and the Engineer’s View of materials information.
Continue readingTresa Pollock named Principal Editor for Metallurgical and Materials Transactions
ASM International, Materials Park, Ohio, announces that the new principal editor of the Metallurgical and Materials Transactions (Met Trans) family of journals will be Dr. Tresa M. Pollock, an internationally recognized leader in the science and technology of advanced structural alloys.
Continue reading2016 J. Willard Gibbs Phase Equilibria Award winner
ASM International, Materials Park, Ohio, is pleased to announce that Dr. Ursula R. Kattner, FASM, Physical Scientist, National Institute of Standards and Technology, Gaithersburg, Md., is the 2016 J. Williard Gibbs Phase Equilibria Award recipient.
Continue readingWinners of Head Health Challenge III announced
The National Football League (NFL), Under Armour, General Electric , and the U.S. Department of Commerce’s National Institute of Standards and Technology (NIST), recently announced the five winners of Head Health Challenge III, an open innovation competition to support the discovery, design, and development of advanced materials that better absorb or dissipate impact.
Continue readingRoads that de-ice themselves
With the arrival of winter, stores, cities, and homeowners are stocking up on salt, gravel, and sand in anticipation of slippery roads.
Continue readingMetal powders are potential replacement for fossil fuels
Can you imagine a future where your car is fueled by iron powder instead of gasoline?
Continue readingNanomanufacturing technique advances imaging technology
More than a decade ago, theorists predicted the possibility of a nanolens—a chain of three nanoscale spheres that would focus incoming light into a spot much smaller than possible with conventional microscopy.
Continue readingDesign software helps deliver helicopter early
Bell Helicopter, Fort Worth, Texas, completed the Bell V-280 tiltrotor fuselage last year ahead of schedule and within budget.
Continue readingBand-Aid of the future (with video)
Engineers at Massachusetts Institute of Technology, Cambridge, designed what may be the Band-Aid of the future: a sticky, stretchy, gel-like material that can incorporate temperature sensors, LED lights, and other electronics, as well as tiny, drug-delivering reservoirs and channels.
Continue readingPickin’ up good vibrations with rock hard guitar picks
Genvac Aerospace Inc., Cleveland, launched a crowdfunding campaign introducing Rock Hard Metal, a line of diamond-enhanced guitar picks.
Continue readingCutting costs of F-35 parts using cryogenic machining system
Leading aerospace OEM acquires an Okuma horizontal machining center with patented cryogenic machining system and increases cutting speeds by 52% with improved surface integrity and part quality, estimates a 30% cost reduction for large titanium airframe components.
Continue readingNucor to acquire cold finish bar assets in Ohio and Georgia
Nucor Corp., Charlotte, N.C., will acquire Gerdau Long Steel’s Bright Bar assets located in Orrville, Ohio, and Cartersville, Ga., for an undisclosed amount.
Continue readingTaking the stress out of engineering new materials (with video)
A team including scientists at the NIST has taken a major step toward measuring stress usefully in cutting-edge materials.
Continue readingMicron donates $25 million to Boise State for materials research
Boise State University, Idaho, announces a $25 million gift from the Micron Foundation that will have a transformational impact on its engineering materials research programs.
Continue readingWhite House Energy Summit focuses on advancing technology safety and low-cost energy
Speaking at the White House Summit on Nuclear Energy physicist Christina Back of General Atomics highlighted the urgency of developing next-generation fast-gas reactors with new materials to enhance safety and ensure energy security.
Continue readingGrant awarded to study key energy materials
Researchers at the University of Arkansas, Fayetteville, will use a $374,621 federal grant to investigate fundamental properties of materials that are considered key to advances in energy generation, storage, and conversion.
Continue readingHarvesting more energy from photons
Quantum process increases the number of electrons produced when light strikes a metal-dielectric interface
Continue readingBoron-doped graphene enhances sensor sensitivity
An international team of researchers, led by Pennsylvania State University, State College, developed ultrasensitive gas sensors based on the infusion of boron atoms into the tightly bound matrix of carbon atoms known as graphene.
Continue readingHeat Treat 2015 Finishes with a “BANG!”
The ASM Heat Treating Society Conference and Exposition (Heat Treat 2015) took place in late October in Detroit. The three-day event, co-located with the American Gear Manufacturer’s Association Gear Expo, attracted over 7000 heat treating and gear professionals from all over the world, including an equipment exhibition featuring 202 companies in 288 booths.
Continue readingASM Handbooks Online now includes Volume 5B: Protective Organic Coatings
ASM International, Materials Park, Ohio, recently released ASM Handbooks Online, which features the addition of ASM Handbook, Volume 5B: Protective Organic Coatings.
Continue readingLinde highlights advanced technologies at Heat Treat 2015
Linde LLC, Murray Hill, N.J., will showcase advanced gas control technologies and engineering services for heat treatment furnaces at Heat Treat 2015 next week in Detroit, booth 248.
Continue readingASM International elects new president, vice president, treasurer, and trustees
ASM International, Materials Park, Ohio, elected Jon D. Tirpak, PE, FASM, as ASM’s 2015-2016 Board of Trustees President.
Continue readingRevolutionizing flexible electronics and solar cells
Binghamton University, N.Y., researchers demonstrated an eco-friendly process that enables unprecedented spatial control over the electrical properties of graphene oxide.
Continue readingAward winning partnership protects the environment
JTEKT North America Corp. recently received the Award for Excellence in Pollution Prevention from the State of Tennessee by using a new technology from Houghton International in the manufacturing processes at its plant in Vonore.
Continue readingNew machining capability is efficient and cost-effective
Norman Noble Inc., Cleveland, Ohio, introduces SynchroFlash, a new machining capability that synchronizes Swiss turning and milling and laser machining into one, highly efficient and cost- effective operation.
Continue readingWorld’s largest database of piezoelectric properties published
Disturbing a material’s crystal lattice can create a charge imbalance that leads to a voltage across the material.
Continue readingAdvancing development of thermal manufacturing technologies
Cross-industry Consortium Leads the Way to Advanced Thermal Manufacturing
Continue readingHeat Treat expo sells out
The exposition for Heat Treat 2015 has sold out for the second time in a row.
Continue reading



















