Modified $450 3D printer builds living materials with more than 100 layers

Researchers led by the University of Rochester’s Anne S. Meyer developed a lower-cost method for creating 3D-printed living materials using a standard plastic 3D printer. These materials can contain bacteria capable of applications such as cleaning contaminated water or breaking down plastic waste, offering an alternative to specialized bioprinters that can cost more than $100,000. 

To solve this, a team of researchers led by the University of Rochester’s Anne S. Meyer has developed a low-cost solution using a standard plastic 3D printer.

“We aim to create DIY bioprinters using inexpensive, easily obtainable parts, so that they are affordable and easy for other scientists to make in their own labs as well,” says Meyer, a professor in the Department of Biology.

In a recent study published in , Meyer and colleagues from URochester and Cornell University modified a regular plastic 3D printer by removing the plastic filament extruder and replacing it with a syringe pump that squeezes out bio-ink—a specialized formula that mixes living cells with a polymer solution. Once printed, the bio-ink hardens into a gel.

“Our syringe can also perform both extrusion and retraction, preventing oozing at the edges of printed structures,” says Meyer. “This new setup allows for printing of crisp shapes with well-defined edges.”

In the true spirit of DIY, Meyer’s lab constructed the customized bioprinter at a cost of $450. All the parts are easily available, adds Meyer, allowing other labs to build their own version of the printer and syringe pump.

While previous DIY 3D bioprinters were limited to printing structures of less than 20 layers, “our upgraded printer can create living structures that are significantly taller and more complex than was previously possible, and it can even create hollow cavities within the prints,” says Meyer, noting that the upgraded DIY printer can print living materials with more than 100 layers.

“This opens up possibilities to make structures that have a high surface-to-volume ratio, so that the embedded bacteria can more efficiently receive signals or nutrients from the environment and can excrete any useful products much more rapidly into their surroundings,” she adds.

Researchers also developed a support gel called a slurry that the bioprinter prints into, which holds up bio-ink and helps it solidify quickly and at any height.

Two types of slurry were created: one for easy removal of the print and one for incubation that allows microbes in the bioprints to stay alive in the slurry for four or more weeks. In previous methods, the printed bacteria started to die after about nine days.

The new slurry could have a significant impact on the research of biofilms—three-dimensional communities of microorganisms, such as bacteria, that adhere to surfaces—that can be both harmful and beneficial to humans.

For Meyer, the benefit of using different methods of incubation is the possibility “to create engineered biofilm materials that either have more biofilm characteristics, allowing study of and testing on medically relevant biofilm, or that have stronger mechanical properties, allowing them to be used for applications.”

For more information: ACS Applied Polymer Materials

Image: Anne S. Meyer’s lab has been making its own low-cost bioprinters for more than a decade, using them to print living structures to test new antibacterial and wastewater treatments along with other applications. Credit: URochester photo / J. Adam Fenster

Case Western Reserve, Argonne National Laboratory sign agreement to partner on critical scientific research

Case Western Reserve University and Argonne National Laboratory signed a five-year agreement to expand collaboration in scientific research and innovation. The agreement was signed Nov. 13 in Cleveland by Case Western Reserve President Eric W. Kaler and Argonne Director Paul Kearns.

“The relationship between our institutions has grown stronger since it first began in 2019 and even more so in the past year,” Kaler said. “This MOU enables us to build on our shared successes, expand our research collaborations, and advance our common goals.”

The partnership facilitates the creation of joint academic appointments for faculty and researchers, student exchanges and new research programs, building on the existing collaboration of the past several years between the university and Argonne, a federally funded research and development facility about 25 miles southwest of Chicago.

“The most significant advances in science increasingly depend on bringing together exceptional people, expertise and capabilities across institutions,” Kearns said. “Case Western Reserve’s talented faculty and students bring a strong record of research excellence, and together, we can build on our strengths to address critical national challenges and develop the next generation of scientific innovators.”

The document identifies eight areas in which the two entities will partner in the next five years. Collaboration could include creating joint appointments, student exchanges or new research programs in:

  • Advanced manufacturing
  • Bioinformatics
  • Biotechnology
  • Critical minerals and materials
  • Data governance and stewardship
  • Electrochemistry
  • Nuclear fuel recycling
  • Polymers and plastics

Argonne and Case Western Reserve researchers have also partnered on high-impact research in areas critical to national security and energy independence. Those projects include a Genesis Mission Phase 1 project funded by the U.S. Department of Energy to use artificial intelligence to help scientists recycle used nuclear fuel, and an Advanced Research Projects Agency-Energy funded project to invent a new chemical separation process to advance to more efficient production of rare earth metals.

Argonne researchers have served on the advisory board of CWRU’s Great Lakes Energy Institute since 2018, and the university was an affiliate of the laboratory’s Joint Center for Energy Storage Research, an innovation hub active from 2013 to 2023.

The collaboration has also produced 98 joint research publications since 2022, in fields ranging from astrophysics to electrochemistry.

Additionally, the institutions recently signed an agreement that created two joint appointments, initially filled by Christine Duval, associate professor, Department of Chemical and Biomolecular Engineering; and Pawan Tripathi, a postdoctoral researcher at Argonne.

For more information: Case Western Reserve

NSF invests in creative approaches to studying critical minerals and materials

Critical minerals and materials are essential to everyday technology, energy systems, national defense, advanced manufacturing and innovation. The U.S. National Science Foundation Directorate for Geosciences invests in research to improve how these materials are discovered and studied while preparing the next generation of researchers.

Here are a few examples of projects supported by these investments over the past year.

Researchers from the Colorado School of Mines are working with industry partners to study the conditions necessary for copper to form in economically viable concentrations at Copper Creek in Arizona.

The project will determine when and at what temperature copper precipitates among three different ore types. The team will conduct field investigations and examine drill core samples using petrography, cathodoluminescence microscopy, and fluid inclusion analysis to provide new insights into the spatial and timing controls on processes that form metals in porphyry copper deposits.

The work will provide support for graduate student training in leading-edge, use-inspired economic geology education and research.

A team from Washington State University is studying chemical changes in hot fluids from a carbonatite-hosted rare earth element (REE) deposit at Mountain Pass, California, to provide geologic context for the timing and evolution of the fluids that produced the REE-enriched geologic formation.

These types of deposits can be difficult to detect at Earth’s surface. The project will expand beyond the primary REE deposit to examine the spatial extent and chemistry of the surrounding “alteration halo” — rocks that have experienced distinct changes in their chemistry that can help “fingerprint” where the REE-enriched rocks are located and the conditions under which they formed.

This project will help researchers and industry focus exploration efforts on additional REE-enriched geologic sources.

Researchers from the New Mexico Institute of Mining and Technology are exploring ways CMM forms in hydrothermal fluids, such as those found in geysers, mud pots, and fumaroles. The team will use thermodynamic models, across a range of pressures and temperatures, to predict conditions in which CMM form in hydrothermal fluids.

Researchers will also determine thermodynamic properties of CMM-bearing hydrothermal fluids and apply these new thermodynamic tools to model natural geothermal systems. Workshops and student internships will provide training opportunities in cutting-edge thermodynamic modeling to improve understanding of CMM formation.

Another group of researchers from Boise State University is developing a rapid, cost-effective prospecting tool for strategic metals using trace elements from different tree species.

The team will compare trace elements in three common mid-elevation evergreen tree species with measurements in nearby soils to determine whether the tree samples can help pinpoint CMM deposits. The team, made up of graduate and undergraduate students, will use laser-ablation, inductively coupled plasma, mass spectrometer analyses to quickly and precisely measure the trace element concentrations in trees.

If successful, this approach would simplify and expand how people prospect for critical minerals in wooded areas.

A research team led by Woods Hole Oceanographic Institution is taking a cutting-edge approach to an established field to find deep-sea sediments enriched in REEs, a subset of CMM used for magnets, catalysts, and many military assets.

Deep-sea clays contain a lot of fish fossils, fish teeth, and shark scales. These long-buried deep-sea creatures have visually identifiable morphological characteristics tied to specific intervals of geologic time, allowing researchers to match the age of the fossil with the age of the surrounding sediment through a field called ichthyolith biostratigraphy.

The research team will use machine learning-driven image classification to significantly advance ichthyolith biostratigraphy, which can in turn enhance super intelligence- and statistics-driven interpolation of sparse data from remote parts of the Pacific Ocean. The outcome can improve predictions on where to find REE-rich deposits.

A collaborative award to the University of Minnesota and Oregon State University will expand use of the Magnetics Information Consortium (MagIC) database, a digital data archive of rock magnetism.

The public database allows researchers to investigate the magnetic properties of Earth materials, supporting the study of changes to Earth’s protective magnetic field over time, pinpointing mineral deposits, and understanding how long-term tectonic motions relate to volcanic and earthquake activity.

MagIC catalogs the magnetic properties of different rock types identified through studies prospecting for critical minerals. The database will serve as a resource for critical mineral exploration. MagIC also stores information about tectonic plate motions, helping researchers predict where ancient tectonic processes may have formed rich deposits of REEs and other strategic minerals.

A cooperative agreement with the University of Minnesota will continue to support the long-term operations and management of the Continental Scientific Drilling Facility (CSDF).

CSDF provides key resources and project support for researchers who need to access the subsurface to collect samples by drilling and coring. These tools are the primary means of accessing, measuring, and monitoring processes that operate at depth and form CMM.

Under the current award, the CSDF will stimulate community science planning and support new projects across the Earth Sciences, including studies of CMM. Recent CSDF-supported projects have examined the tectonic and geochemical controls on active-fault hydrogeology, providing insights into the environments and processes linked to critical mineral formation.

A new NSF Research Experience for Undergraduates (NSF REU) site led by Miami University will provide undergraduate students with hands-on summer research opportunities covering three themes: Soil, Water, and Atmospheric Systems; Hazards and Resource Preservation; and Critical Minerals. The NSF REU site aims to address the need for a science, technology, engineering, and mathematics-ready workforce.

Students will conduct a 10-week, independent, faculty-mentored research project associated with one of the themes. Those working on the critical minerals theme can explore potential domestic sources of chromium, cobalt, and nickel associated with ultramafic rocks, as well as opportunities to recycle historic mine waste from gold-silver mining operations. During the summer experience, students will also gain career exposure through connections with real-world practitioners in the critical minerals space.

A multi-institute team led by Syracuse University is supporting eRock, an open digital platform that makes outcrop data easier to find, explore, analyze, and share.

The team will be investigating how geological processes control the movement and concentration of lithium in Earth’s crust. This work could improve exploration strategies and strengthen domestic supplies of a mineral critical to the energy transition.

This project will also create a transformational, browser-based analytical environment that integrates measurement, interpretation, and contextual metadata in one open platform. The platform uses drone photography, 3D imaging, and web-based visualization tools to allow scientists to remotely study the geological structures that host REEs and transition materials like lithium.

By improving access to digital field data, the project will strengthen geoscience research and help prepare the next generation of geoscientists with modern digital skills.

For more information: National Science Foundation

Image: The Operational Land Imager-2 (OLI-2) on Landsat 9 acquired this natural-color image of the lithium mining operation in Silver Peak, Nevada, on December 8, 2022. The Silver Peak mine generates about 1 percent of the world’s annual production of lithium. Credit: NASA Earth Observatory image by Lauren Dauphin, using Landsat data from the U.S. Geological Survey

New report identifies four moon sites for crewed missions to explore to advance scientific discovery

A National Academies of Sciences, Engineering, and Medicine report recommends four sites for future crewed moon missions: Bhabha Crater, Mons Hadley, the Orientale Basin and the Aristarchus Plateau. Exploring these areas could help scientists better understand the moon’s history, the solar system and potential resources that could support future human exploration.

“Exploring these lunar sites will allow scientists to unlock new information about the moon that has never been available to us before,” said James Day, professor at Scripps Institution of Oceanography and the University of California, San Diego, and co-chair of the committee that wrote the report. “Returning to the moon will be a great achievement for humanity, and setting foot where we never have before will be a major moment for science.”

The far side of the moon is shielded from radio frequency interference from Earth, making it an ideal place for groundbreaking discoveries in radio astronomy and other observations that could open new windows to investigating the universe. There are also important questions related to biology and human health that could be addressed — for example, how lunar soil could be used to benefit long-term human habitation on the moon.

“The four sites that our report recommends would give astronauts the chance to study questions as varied as how to use lunar soil to grow plants, to understanding the sources of gravitational waves,” said committee co-chair Daniel Dumbacher, professor of engineering practice in the School of Aeronautics and Astronautics at Purdue University. “These sites give science the best shot at learning as much as possible from a crewed mission beyond the South Pole of the moon.”

Bhabha Crater
Bhabha Crater would be the farthest and most isolated location humans have ever explored. Human explorers would be able to access material from the moon’s oldest preserved impact basin, investigate the lunar crust on the far side of the moon, and deploy radio and optical astronomy experiments.

Mons Hadley
On the near side of the moon, the Mons Hadley region is near the landing site for the Apollo 15 mission. Revisiting the site would provide new information for future crewed missions by allowing the study of hardware and biological materials left exposed to the lunar environment for more than 50 years. At Mons Hadley, explorers could collect new geological samples and samples from the Apollo 15 site to inform the Artemis program and moon-to-Mars planning. This site would also be suitable for a space weather observatory and an experiment to assess how material from the moon’s surface may mitigate radiation hazards, the report says.

Orientale Basin
On the outer edge of the moon’s disk as seen from Earth, the Orientale Basin provides access to the best-preserved, large, multi-ringed impact basin in the solar system. Visiting this site would offer an unmatched variety of geological materials and a seismically quiet environment that will yield insight into the deep structure and origin of the moon, the report says. Mission crews should return samples from the basin to Earth to better understand how the basin was formed, as well as deploy a gravitational wave observatory.

Aristarchus Plateau
Rising dramatically from ancient lava flows on the near side of the moon, the Aristarchus Plateau is a geologically rich volcanic landscape. This site would provide the opportunity to collect samples that will yield insight into the variety of volcanic processes that have shaped the moon and potentially important resources that could support future exploration. This site would also be suitable for establishing a space weather observatory to improve space weather forecasting and for assessing how material from the moon’s surface may mitigate radiation hazards.

Improving Science Capabilities
The report also makes recommendations for NASA that would enhance the ability of astronauts to explore these locations and pursue scientific discovery. NASA should develop the capability for astronauts to travel farther than the current maximum of 2 kilometers for extravehicular exploration, and ensure that instruments deployed by astronauts can operate over many day-to-night cycles on the moon.

NASA should also develop a high-resolution observational tool to be placed in orbit above the moon to ensure continued safety and planning for lunar missions, as well as a simple, unpressurized crewed rover for short excursions, and continuous communications capabilities to be used by humans working on the surface of the moon.

For more information: National Academies

OHIO researchers Faiz Rahman, Savas Kaya receive $550,000 NSF award for next-generation nanolithography

A new U.S. National Science Foundation award will support Dr. Faiz Rahman and Dr. Savas Kaya in developing an advanced electron-beam lithography technique capable of creating features smaller than 5 nanometers. The three-year, $550,000 project runs from Sept. 1, 2026, through Aug. 31, 2029.

Electron-beam lithography is an important tool for fabricating extremely small customized structures, but producing features approaching molecular dimensions remains technically challenging.

The new project seeks to overcome these limits by combining a very fine electron beam with deep-ultraviolet radiation and singlet oxygen, a highly reactive form of oxygen. The electron beam breaks long polymer chains in the resist into smaller fragments, while singlet oxygen helps remove those fragments during patterning. This approach could allow extremely small openings to be produced directly in the resist in a single-step process.

The research aims to demonstrate patterning at the sub-5-nm scale, a capability increasingly important for semiconductor manufacturing and potentially valuable in photonics, bioengineering, nanomaterials and biomedical applications. The resulting nanoscale patterns could also be used as templates for removing or depositing materials and for fabricating photomasks needed for future generations of microelectronic devices.

The work will be conducted at Ohio University’s Russ Research Opportunity Center (RROC) and will strengthen NQPI’s experimental capabilities in nanofabrication and nanoscale science.

According to Rahman, an existing scanning electron microscope will be converted into an electron-beam lithography system for the project. The research will also provide training opportunities for postdoctoral and graduate researchers.

The award highlights the interdisciplinary strengths of NQPI and Ohio University in nanotechnology, advanced manufacturing, materials science and device fabrication, while establishing new capabilities for creating structures at dimensions of only a few nanometers.

For more information: National Science Foundation

Locusts get a sensory assist from nanomaterials

Researchers are exploring how insects could serve as sensing systems in environments that are difficult or dangerous for humans to access. Research from Washington University in St. Louis combines insects’ biological abilities with engineering to potentially detect hazards, map areas and gather information in challenging environments.

“We marry the best biology has to offer with engineering principles to create a superior sensing system,” said Barani Raman, the Dennis & Barbara Kessler Professor in biomedical engineering at the WashU McKelvey School of Engineering.

Raman and his colleague Srikanth Singamaneni, the Lilyan & E. Lisle Hughes Professor in mechanical engineering and materials science, are senior authors of the research.

Both biological and artificial chemical sensing systems have drawbacks, Singamaneni said. A locust’s olfactory system is extremely sensitive and can detect faint odors that guide its behavior. But even with 50,000 olfactory receptor neurons in each antenna, it can’t identify a wide enough range of chemical compounds. Meanwhile, synthetic sensors don’t perform as well as more nimble living creatures, but they can be very accurate at detecting specific compounds. Why not combine the two?

“Both biological and artificial chemical sensing approaches have their strengths and drawbacks,” said Singamaneni, but by combining them, “you can cast a broader net.” Here, they added an ultralight, highly porous nanomaterial coating, known as surface-enhanced Raman scattering (SERS) substrate, to the locusts’ antennae.

SERS is a technique that boosts signals from molecules on or near nanostructure metal surfaces; it’s especially useful for detecting trace chemicals. In this case, researchers used a collagen foam applied to the antennae or wings. The foam augmented the insect’s odor-detecting skills without interfering with its other functions.

Singamaneni’s lab specializes in designing and synthesizing these types of nanomaterials. He has been working with plasmonic nanostructures as long as Raman has been mapping locust sensory circuits. They melded their research, and it paid off. Locusts equipped with the foam outperformed non-SERS locusts as well as synthetic chemical sensors, improving odor-detection performance across all chemicals tested, including the chemical signature for TNT.

In a series of tests, their hybrid systems successfully detected a wider range of smells without affecting the insect’s normal functions.

Raman said a key challenge in chemical sensing is they often don’t know what molecules they’re targeting. The foam attached to the antenna helps identify particular chemical species, he noted. The biology and the chemical sensing parts complement each other.

“It clearly showed the best of the two worlds can be merged,” he said.

For more information: Advanced Materials

Image: A future hybrid system could deploy locusts like this one to detect chemical vapors in search-and-rescue operations, or war zones, quickly identifying particular chemicals based on neural response signatures in the organism and pinpointing their locations before responders enter the scene. The foam on the antenna and wing can enhance an organism’s innate sensory system, collect samples and detect trace chemical signatures. (Photo: Raman lab)

Enhancing hidden defects to strengthen metal materials

Scientists have discovered a way to use defects in crystals to create stronger materials. By organizing these imperfections into dense networks, researchers strengthened two metal alloys without changing their chemical composition.

Notably, this method significantly increased both the amount of stress the metals could withstand and their resistance to gradual warping at high temperatures. These results suggest that adding a layer of engineered defects to structural materials could complement conventional materials design, said Andreas Bezold, lead author of the study and an adjunct assistant professor of materials science and engineering at The Ohio State University.

“Defects are very important to learn more about, because by understanding how they interact with a material’s internal structure helps us design stronger materials,” he said.

Built on previous Ohio State research that showed how microscopic defects that form during deformation can be turned into layers that strengthen the structure, this team’s approach is the first to introduce densities that fully enrich these alloys. Using this method to develop alloys with more advanced properties could help scientists create more sustainable, longer-lasting materials.

“We wanted to make these strengthening structures a deliberate part of the material’s design,” said Bezold. “So it was fascinating to see how defects could have such a positive effect on the overall durability of the alloys.”

To measure how defects could strengthen metal, researchers first deformed the crystals in a cobalt-nickel-based superalloy and a cobalt-chromium-tungsten alloy, then used heat to slowly age them. This process created atomically thin, dense features in the structure that scientists could analyze.

Utilizing a combination of two techniques, transmission electron microscopy and computer simulations, the team found that the resulting boost in strength was linked to how atoms were arranged around the structural defects. Altering this complex formation could influence the strength of the material.

“Seeing the strengthening process on the atomic scale was quite stunning, since despite being associated with damage, the right defects with the right structure and chemistry can actually make a material stronger,” said Michael Mills, co-author of the study and a professor of materials science and engineering at Ohio State.

In the future, this method could be used to create high-strength alloys for technologies that have to withstand high temperatures, such as aircraft turbine engines or power plant machinery. For now, Bezold’s team is helping pave the way for richer design principles in engineering.

“This is a field that is quickly becoming very exciting,” he said. “We hope that this idea becomes a new lever that strengthens and pushes the limits of material engineering even further.”

For more information: Science

One Minute Mentor: Tempering of Shock-Resisting Tool Steels

Both the tungsten and silicon types of shock-resisting tool steel resist softening during tempering to a greater degree than carbon tool steels. Secondary hardening does not occur in these steels, except to a minimal degree in some high-W or high-Mo compositions (e.g., S5 and S7). The effect of tempering temperature on the hardness of various types and compositions of S steels is shown in Fig. 6.

Tools made of shock-resisting steel should be tempered immediately after quenching, or cracking is likely, especially if they are quenched in water or brine. Ideally, quenched tools should reach 50 to 70 °C (120 to 160 °F) before tempering begins. Some tool records indicate that double tempering is beneficial for S steels. It is especially important where higher toughness is required, for large parts (>50 mm, or 2 in.), and for the higher-alloyed grades (e.g., S5 or S7).

Surface treatments such as carburizing and carbonitriding are often applied to S1 steel. Types S4 and S5 do not take an effective carburized case.

For more information, click on the link below (subscription required). Then scroll to Figure 6.

Rafael Agnelli Mesquita; Reinhold Schneider; Cristiane Sales Gonçalves, Heat Treating of Cold-Work Tool Steels — Low- and Un-Alloyed Water and Oil Hardening Steels, ASM International, 2014. https://doi.org/10.31399/asm.hb.v04d.a0005972

Lighteum Medical appoints Gaurav Agarwal as CEO

Lighteum Medical, San Diego, California, a manufacturer of precision medical components including high-complexity nitinol-based solutions, appointed Gaurav Agarwal as chief executive officer.

Agarwal has nearly 30 years of leadership experience across medical devices, diagnostics, and healthcare technology, including involvement in more than $15 billion in M&A transactions and $11 billion in private equity dispositions. He most recently served as president and CEO of Capsa Healthcare, where the company delivered more than 20% revenue and EBITDA growth in 18 months and completed two tuck-in acquisitions. He previously served as president and CEO of Vyaire Medical and held senior positions at Acelity/KCI, Smith & Nephew, and GE Healthcare. At Acelity/KCI, he led global commercial roles during the company’s $6.725 billion sale to 3M.

“Gaurav is an accomplished medtech leader and proven growth-oriented operator with a track record of building high-performing organizations and driving results,” said Gregory T. Lucier, chairman of the board.

“I am excited to join Lighteum Medical and advance our mission of providing precision-engineered solutions that enable life-enhancing, minimally invasive medical devices,” said Agarwal.

Lighteum Medical, a Montagu portfolio company, was formed by combining Medical Device Components LLC and Lighteum LLC. The company specializes in platinum group metals and nitinol components and applies expertise in metallurgy, micromachining, femtosecond laser processing, shape setting, and electropolishing. It operates manufacturing centers in San Diego and Oceanside, California; Mexicali, Mexico; and Tullamarine, Australia.

Read further here: https://qmed.com/lighteum-medical-appoints-gaurav-agarwal-as-chief-news129923.html

Axel Johnson Inc. takes full ownership of Fort Wayne Metals

Axel Johnson Inc. (AJI), New York, acquired full ownership of Fort Wayne Metals Research Products LLC, Fort Wayne, Indiana, from the Glaze family. AJI first invested in the company in 2021.

Founded in 1970, Fort Wayne Metals develops and manufactures high-performance precision materials for medical devices and other critical applications, supporting millions of medical procedures each year. The company will remain headquartered in Fort Wayne, where it has operated for more than 50 years.

Jeremy Rohrs continues as president and CEO of Fort Wayne Metals.

“Today marks the beginning of an exciting new chapter for Fort Wayne Metals and AJI,” said Sara Greenstein, CEO, Axel Johnson Inc.

“This milestone represents an exciting opportunity for our employees, customers, and partners,” said Rohrs.

The transition completes a partnership that began five years ago and places Fort Wayne Metals fully within AJI’s portfolio of long-term holdings. AJI, founded in 1920 and headquartered in New York City, is a family-owned investment company that builds businesses through long-term ownership partnerships. It employs more than 5,500 people and is part of the Axel Johnson Group, which has about 40,000 employees.

Fort Wayne Metals is a supplier of precision wire and materials to the medical device industry, with a long history of innovation and quality in materials for medical and industrial applications.

Read further here: https://www.businesswire.com/news/home/20260701588723/en/Fort-Wayne-Metals-Joins-Axel-Johnson-Inc.-in-Full-Ownership-Transition

Pressio Spine completes first cases with nitinol compression staple

Pressio Spine announced the successful completion of the first surgical cases using its Continuum compression staple, a superelastic nitinol fixation system for single-level anterior cervical discectomy and fusion (ACDF).

The Continuum staple is engineered to provide continuous compression across the fusion site. It uses an in-line spinal positioning design with a streamlined placement technique and is supplied as a fully sterile, single-use instrument kit.

The initial cases were performed by Dr. Daniel Leas of Carolina Neurosurgery and Spine Associates.

“The nitinol compression is doing real work immediately,” said Leas. “I don’t have to think about screw angles or trajectories or multi-step fixation protocols.”

Conventional anterior cervical fixation typically relies on plates and screws placed in multiple steps. Pressio Spine positions Continuum as an alternative in which the superelastic nitinol actively maintains load on the graft after placement.

“Continuum changes that entirely,” said Kent Ellington, CEO, Pressio Spine. “The nitinol compression is actively working, continuously supporting the fusion site.”

The staple is designed for use alongside the company’s Tidal cervical fusion cage, a 3D-printed titanium cage with 80% porosity and a threaded design for rotational stability.

Pressio Spine develops spine surgery technologies intended to bridge clinical potential and patient outcomes in modern operating environments.

Read further here: https://www.financialcontent.com/article/bizwire-2026-9-15-pressio-spine-announces-successful-completion-of-initial-continuum-cases

Quasar Medical acquires Nitinol Design and Development Center in San Diego

Quasar Medical, a global contract development and manufacturing organization (CDMO) for minimally invasive medical devices, acquired the Nitinol Design and Development Center in San Diego, California, from Medres International.

The 10,000-sq-ft center, established in 2024, provides nitinol design, development, process engineering, and precision manufacturing for minimally invasive devices. Its capabilities include laser cutting, shape setting, and electropolishing. The acquisition brings dedicated nitinol operations and engineering staff to Quasar and adds design, prototyping, and process optimization capabilities.

The center is about an hour’s drive from Quasar’s facility in Tecate, Mexico, and will have access to the company’s global manufacturing network of 11 locations. Integration will be overseen by Christine Trepanier, senior vice president of technology at Quasar Medical, with Tom Duerig, who introduced nitinol to medical devices as founder of NDC, serving as senior advisor.

“Nitinol is a foundational technology for many of today’s most advanced devices, both in minimally invasive disposables and implantables,” said Alex Wallstein, CEO, Quasar Medical. “This is a significant upgrade of Quasar to a whole new level of expertise.”

“We are confident that under the stewardship of Quasar, the Nitinol Center in San Diego will thrive with dramatically increased resources and customer reach to achieve its full potential,” said Dr. Chris Cheng, CEO and chairman, Medres International.

Quasar Medical has more than 38 years of experience, about 5,000 employees, and 11 locations. The ISO 13485:2016-certified company supplies catheters, balloons, steerable systems, nitinol technologies, electromagnetic sensors, and complex assemblies.

Read further here: https://www.prnewswire.com/news-releases/quasar-medical-acquires-nitinol-design-and-development-center-302839603.html

Can-Eng to supply walking beam austenitizing furnace for wear-resistant plate

Can-Eng Furnaces International, Niagara Falls, Ontario, Canada, was awarded a contract to design and supply a high-temperature plate processing austenitizing furnace system. The system will produce critical wear components used in ground-engaging equipment that operates in severe service conditions. The customer was not named.

Austenitizing is the high-temperature step that precedes quenching when hardening steel. The new system is designed to provide precise temperature control, metallurgical consistency, and production capacity for heavy-duty applications.

The furnace uses an air-cooled walking beam design that allows waste heat to be recovered and used as part of the building’s heating system. Engineered to accommodate plates up to 8 ft (2.44 m) wide, the walking beam configuration minimizes product distortion while providing reliable material handling throughout the heat treatment cycle.

Thermal input is supplied by direct-fired, auto-recuperative burners, which provide efficient heat transfer while reducing fuel consumption. Furnace combustion, process control, and walking beam motion are integrated through a Siemens S7-1500F programmable logic controller.

Can-Eng has more than 60 years of experience designing and manufacturing walking beam furnace systems for customers worldwide. The ISO 9001:2015-certified company supplies thermal processing systems for steel, aluminum, and other metals.

Read further here: https://www.can-eng.com/news/can-eng-has-been-awarded-a-contract-to-design-and-supply-a-high-temperature-plate-processing-austenitizing-furnace-system

Hiperbaric supplies Spain’s first domestically built HIP system to TTT Group

Hiperbaric, Burgos, Spain, will supply TTT Group, a Spanish provider of heat treatment and surface coating services, with a Hiperbaric HIP 107 hot isostatic pressing system. It is the first HIP system built with Spanish technology to be sold in Spain, and it will allow TTT to launch a new HIP business unit serving the aerospace, defense, energy, and oil and gas sectors.

The HIP 107 post-processes critical metal components, particularly castings and additively manufactured parts, to eliminate internal porosity and improve fatigue life, ductility, and other mechanical properties. It operates at pressures up to 2,000 bar (29,000 psi) and temperatures up to 1,400°C (2,550°F), with an option to reach 2,000°C (3,630°F). Its Fast Cooling technology combines heat treatment and material consolidation in a single step, reducing energy costs and cycle times.

“We are immensely proud that our first HIP system installed in Spain is being deployed by a leader like TTT Group,” said Andrés Hernando, CEO, Hiperbaric.

“This operation represents the largest investment in our company’s 65-year history,” said Xabier Berasategi, CEO, TTT Group. “With this equipment, we not only eliminate microscopic internal pores in mechanical parts to ensure their extreme fatigue resistance, but we also provide the market with a comprehensive competitive advantage: heat treatments and HIP densification under one roof.”

The order follows Hiperbaric’s sale of its first HIP system to Plus Metal, Taiwan, last year. Founded in 1999, Hiperbaric designs and manufactures high-pressure processing equipment for the food and beverage industry, HIP systems for industrial components, and high-pressure hydrogen compression systems. It also operates the first HIP Innovation Center in Southern Europe.

Read further here: https://www.hiperbaric.com/en/hiperbaric-suministra-primer-equipo-hip-en-espana-a-la-guipuzcoana-ttt-group-nueva-unidad-de-negocio/

Aichelin supplies vacuum heat treatment system to Turkish tool steel producer

Aichelin, Mödling, Austria, delivered, installed, and commissioned a vacuum heat treatment system for Ayhan Takım Çelik A.Ş., a Türkiye-based provider of tool steels and technical materials. The investment expands the customer’s heat treatment capabilities for premium tool steels, particularly for demanding aluminum extrusion and die-casting applications.

The installation consists of a vacuum gas-quenching furnace with 10-bar nitrogen quenching and a vacuum tempering furnace. It handles batch weights of up to 1,500 kg (3,300 lb) and combines oxidation-free heat treatment with precise temperature control, providing good surface quality and highly reproducible process results.

Following commissioning and final acceptance, the system has been fully integrated into the customer’s production environment. The two companies worked together through the engineering, manufacturing, installation, and startup phases.

“The new Aichelin system offers the precision and reliability we need,” said Ayhan Dere, CEO, Ayhan Takım Çelik. The company continuously invests in technologies that strengthen production capacity, meet high quality standards, and support its long-term growth strategy.

Andaç Güzel, director, AICHELIN ST Vakum Fırınları A.Ş., said the project combines proven vacuum technology with process reliability and energy efficiency.

The Aichelin Group designs and builds industrial furnace systems for the heat treatment of metals and supplies vacuum heat treatment solutions for high-performance tool steels to customers worldwide.

Read further here: https://prozesswaerme.net/stahl/aichelin-liefert-leistungsstarke-vakuum-waermebehandlungsanlage-an-ayhan-takim-celik/

SECO/WARWICK supplies second vacuum furnace to Chinese turbine component maker

SECO/WARWICK, Świebodzin, Poland, received a repeat order for a Vector single-chamber vacuum furnace from a Chinese manufacturer of gas turbine and aircraft engine components. The furnace will heat treat turbine blades made from high-temperature alloys.

The order follows a vacuum furnace with a graphite hot zone that SECO/WARWICK delivered to the same customer in 2023. Based on that unit’s performance, the customer ordered a more technically demanding version for its turbine blade work.

The customer’s process required capabilities beyond the standard Vector configuration: gas cooling at up to 12 bar instead of the standard 10 bar, and temperature uniformity of ±3°C (±5.4°F) instead of ±5°C (±9°F). The furnace operates at temperatures up to 1,400°C (2,550°F), handles a maximum gross load of 600 kg (1,300 lb), and maintains vacuum levels of 10⁻³ Pa to minimize oxidation. It uses an all-metal hot zone rather than graphite, which the company notes is particularly important in processes that require a highly clean environment.

“In this project, the key was to combine two things: the proven design of the Vector vacuum furnace and a very specific adaptation to the customer’s process,” said Maciej Korecki, vice president of the vacuum segment, SECO/WARWICK Group.

Pan Gaojun, managing director, SECO/WARWICK China, said, “The first unit we delivered to this partner proved its value in everyday production. That is why the order was repeated.”

SECO/WARWICK Group designs and manufactures vacuum, atmosphere, and aluminum heat treatment furnaces and vacuum metallurgy equipment, with operations in Poland, the U.S., China, and India.

Read further here: https://www.secowarwick.com/en/news/another-vector-for-turbines/

Thermo Fisher introduces new RaptIR X FTIR Microscope

Thermo Fisher Scientific (Waltham, Mass.) recently launched the Thermo Scientific Nicolet RaptIR X FTIR Microscope. The new equipment is the latest advancement in FTIR microscopy designed to make chemical analysis of microscopic samples more accessible, intuitive and efficient for laboratories.

Continue reading

Common metal could unlock a cheaper path to quantum materials

Researchers have created a cobalt-based thin film that could offer a lower-cost approach to developing materials for quantum research. By adding about 4% cobalt to sodium antimonate, scientists created localized honeycomb structures that produce strong magnetic interactions associated with Kitaev-type quantum materials without disrupting the material’s larger crystal structure.

Kitaev materials are studied because some may support quantum spin liquids, unusual states in which atomic spins remain dynamic instead of settling into conventional magnetic order. Research has often relied on compounds containing scarce metals such as ruthenium and iridium.

“Previous work in this area has largely been limited to rare metals like ruthenium and iridium,” says lead author Hao-Bo Li. “We asked whether cobalt, one of the most common transition metals on Earth, could be made to form the same honeycomb structure and display the same intriguing physics.”

Microscopy confirmed that the cobalt atoms clustered into the predicted honeycomb motifs without creating unwanted secondary phases.

“What excites us is that these cobalt honeycombs appear to form naturally, without any special coaxing,” explains senior author Hidekazu Tanaka. “They even produce a clear magnetic signal that matches what theory predicts for this type of structure.”

Magnetic measurements showed a ferromagnetic-like state near 88 K, or about minus 301 degrees Fahrenheit. Calculations indicate that this behavior comes from the local arrangement of cobalt atoms within the CoO6 structures.

The material has not been shown to host a quantum spin liquid, but it provides a cobalt-based system for studying Kitaev-type magnetism without relying on rare metals.

“Cobalt is relatively cheap, widely available, and already used in semiconductor manufacturing,” remarks Li. “This approach could eventually lead to quantum computing components that are far more practical to produce at scale.”

The researchers are now working to further engineer the material and test its quantum properties in greater detail.

For more information: Physical Review Materials

Physicists find evidence for ‘third’ type of magnetism

Altermagnets are a recently described class of materials that have no net magnetization but display magnetic-like electron behavior. Their unique properties could support advances in spintronics, which uses electron spin to develop faster, more efficient electronics. Because altermagnets do not produce stray magnetic fields, they could also allow devices to be placed closer together without interference.

“Ferromagnetism produces the behavior most people associate with everyday magnets,” said senior author University of Central Florida’s Professor Madhab Neupane and colleagues.

“In these materials, magnetic moments align in the same direction, creating a magnetic field. That property can be useful in electronics, but the resulting stray magnetic fields can interfere with nearby components.”

“Antiferromagnets behave differently. Their magnetic moments point in opposing directions and cancel one another out, largely avoiding the stray fields. However, they lack some of the useful electronic properties found in ferromagnets.”

“Altermagnets offer another possibility by combining desirable characteristics of both,” they added.

“Like antiferromagnets, they can avoid producing unwanted stray magnetic fields. But they can also generate and detect spin currents — the movement of electron spins through a material — that researchers hope to use for future electronics.”

In the study, the researchers used a technique called angle-resolved photoemission spectroscopy, which maps how electrons move inside a crystal, including measurements that distinguish between spin ‘up’ and spin ‘down’ electrons.

They first detected a characteristic splitting in the electronic bands of Co1/4TaSe2.

They then used spin-resolved angle-resolved photoemission spectroscopy to take a closer look and found that those split states carried opposite spin polarizations, key evidence of altermagnetism.

“The significance became clear once the experimental measurements consistently matched our theoretical predictions,” Professor Neupane said.

“Seeing those independent pieces of evidence converge gave us confidence that we had identified a genuine layered altermagnet.”

According to the scientists, the material is distinctive because it is a layered, van der Waals crystal, which could make it easier to combine with other exotic materials, such as superconductors, in layered devices.

Other altermagnet candidates studied so far, mainly manganese telluride and chromium antimonide, are not layered in this way.

“Evidence for altermagnetism in a versatile materials platform opens a lot of new possibilities,” said first author Milo Sprague, also from the University of Central Florida.

“There’s currently a lot of debate in altermagnetic theory about how the spin-polarized electronic states interact with other magnetic phenomena.”

“Now we have a material that we can easily modify to explore these new questions.”

For more information: Nature Communications

Image: Establishment of altermagnetic crystal and magnetic structure in Co1/4TaSe2. Image credit: Sprague et al., doi: 10.1038/s41467-026-76784-x.