Grede will work with Michigan Technological University, others to bring thin-wall ductile iron castings to high-volume production.
Continue readingCould black phosphorus be the next silicon?
New material could make it possible to pack more transistors on a chip, research suggests.
Continue readingOSTP Calls for Nanotechnology-Inspired Grand Challenges
The National Nanotechnology Coordination Office (NNCO) is pleased to highlight an important request for information (RFI) issued by the White House Office of Science and Technology Policy (OSTP) seeking suggestions for Nanotechnology-Inspired Grand Challenges for the Next Decade.
Continue readingMaterials Science and Engineering Data Challenge
People have successfully applied advanced analysis techniques to big data and have solved significant challenges in several areas of society including business, biology, and astronomy.
Continue readingTesting unmanned aircraft systems
NASA, working with government and industry partners, is testing a system that would make it possible for unmanned aircraft to fly routine operations in U.S. airspace.
Continue readingMetallurgical and Materials Transactions Editorial Office Transition
Long-time Metallurgical and Materials Transactions production editor Dora Moscatello will retire on June 30.
Continue readingDiamond defects to monitor temperature
Luminescent signals from green glowing diamond defects could monitor temperature in a range of physical and biological systems with unprecedented versatility
Continue readingResearchers measure graphene vibrations
An international research group led by scientists at NIST’s Center for Nanoscale Science and Technology developed a method for measuring crystal vibrations in graphene
Continue readingNew quantum effect could lead to novel nanoelectronics
A quantum mechanical transport phenomenon demonstrated for the first time in synthetic, atomically-thin layered material at room temperature could lead to novel nanoelectronic circuits and devices, according to researchers at Pennsylvania State University, College Park.
Continue readingNovel material significantly improves traditional aerogel properties
A new polyimide aerogel developed at NASA’s Glenn Research Center, Cleveland, represents a revolutionary advance over the fragile silica aerogels currently on the market.
Continue readingCollaboration to develop carbon fiber for automotive light-weighting
The Ford Motor Co., Dearborn, Mich., and DowAksa, Turkey signed a joint development agreement to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber.
Continue readingUltracold temps cause molecules to chill out
At near absolute zero, molecules may start to exhibit exotic states of matter.
Continue readingRipples of a particle-separating wave seen in primordial plasma
Scientists in the STAR collaboration at the Relativistic Heavy Ion Collider (RHIC) have new evidence for what’s called a “chiral magnetic wave” rippling through the soup of quark-gluon plasma created in RHIC’s energetic particle smashups.
Continue readingSTRESS RELIEF — 3D-print your laptop
Using PLA filament, a small London-based team have managed to achieve the 3D printing of their own Raspberry-Pi-based laptop, with a battery life of six to eight hours and Wi-Fi enabled out of the box.
Continue reading3D printed biogel
Stretchable, biocompatible hydrogels with complex patterning could be used in tissue engineering.
Continue readingLeading innovation institutes convene in Detroit
LIFT, America Makes, and DMDII will inspire a new generation of investment in manufacturing technologies.
Continue readingConferences convene for successful Mega Show event
Aerospace and thermal spray professionals gathered for aerospace coating and materials information.
Continue readingHow microbes acquire electricity in making methane
Scientists at Stanford University, Calif., solved a long-standing mystery about methanogens—unique microorganisms that transform electricity and carbon dioxide into methane.
Continue reading3D-Printed Habitat Challenge
NASA and the National Additive Manufacturing Innovation Institute, known as America Makes, are holding a new $2.25 million competition to design and build a 3D printed habitat for deep space exploration.
Continue readingProgram focuses on future materials scientists
With advances in science and technology, today’s high school students could end up working with materials that don’t even exist today.
Continue readingTiny grains of lithium improve fusion plasma performance
Scientists from General Atomics and the U.S. DOE’s Princeton Plasma Physics Laboratory (PPPL) discovered a phenomenon that helps improve fusion plasmas, which could ultimately speed fusion energy development.
Continue readingTinkertoy materials hold promise as temperature regulators
Sandia National Laboratories, Livermore, Calif., researchers made the first measurements of thermoelectric behavior by a nanoporous metal-organic framework (MOF).
Continue readingCHiMaD consortium releases first annual report
The Center for Hierarchical Materials Design (CHiMaD), a NIST-sponsored center of excellence for advanced materials research and a critical component of the Materials Genome Initiative (MGI), has released its first annual report.
Continue readingSeparating rare earth metals with UV light
Researchers from the University of Leuven (KU), Denmark, Department of Chemical Engineering discovered a method to separate two rare earth elements—europium and yttrium—with UV light instead of with traditional solvents.
Continue readingMicroscope captures fermionic atoms
Fermions are the building blocks of matter, interacting in a multitude of permutations to give rise to the elements of the periodic table.
Continue readingSolar sailing team prepares for flight
LightSail is a citizen-funded project by The Planetary Society, Pasadena, Calif.
Continue readingMS&T2016—Call for symposium proposals
Symposium proposals for MS&T16 are being accepted through May 31, 2015.
Continue readingPerformance silica improves tire performance
Patented filler improves rolling resistance, wet traction and manufacturing efficiency.
Continue readingTechnique creates stronger carbon nanotube films
Researchers developed an inexpensive technique called “microcombing” to align carbon nanotubes (CNTs), which can be used to create large, pure CNT films that are stronger than previous films.
Continue readingImproving steelmaking with industrial gas technologies
Experts in steel metallurgy and process gas engineering from Linde LLC and Linde Engineering North America Inc. are showcasing technologies for improving plant productivity, product quality and environmental performance at AISTech 2015 at the Cleveland Convention Center, May 4-7.
Continue reading






















