Minnesota Rubber & Plastic breaks ground Thursday on a new $7 million, a 9,000-square-foot innovation center in Plymouth that will put its material scientists and engineers closer to their clients.
Continue readingFully pressure-insensitive, pressure-based, mass flow controller for etch and CVD processes in semiconductor manufacturing
Brooks Instrument, a leader in precision fluid measurement and control technology, has released the new GP200 Series, the first fully pressure-insensitive, pressure-based, mass flow controller designed specifically for etch and chemical vapor deposition processes in semiconductor manufacturing.
Continue readingSpray Tips – Alumina surface roughening parameters during dry abrasive grit blasting
Second to cleaning, roughening is the most important step in preparing the surface to accept a sprayed coating.
Continue readingDOE awards $26M to labs and universities to advance chemical materials sciences with data science
The U.S. Department of Energy announced $26 million in research funding to harness research tools for clean energy solutions. The 10 projects announced will help scientists to unleash the power of data science.
Continue reading3D-printed grafts could revolutionize the treatment of cardiovascular disease
A biodegradable and customizable 3D-printed vascular graft could help prevent heart failure in cardiovascular patients.
Continue readingAtomica announces new brand, $50 million equipment acquisition
Atomica, Santa Barbara, Calif., formerly known as Innovative Micro Technology Inc., a global leader in microelectromechanical systems, has acquired $50 million of cutting-edge semiconductor processing tools.
Continue readingDevelopment of a Residual Stress Standard
In the past ten to fifteen years, significant progress toward the understanding and management of residual stresses in metallic structure has been made under the auspices of numerous Metals Affordability Initiative (MAI) projects, Small Business Innovative Research (SBIR) projects, USAF program funded projects, and many others. In January 2020, the ASM International Technical Committee on Residual Stress formed a subcommittee on residual stress standards development, whose goal is to promote the development of standards and specifications for the measurement, modeling, understanding and management of residual stress
Continue readingA college of semiconductor research is established in Taiwan
National Tsing Hua University’s (NTHU) plan to establish a College of Semiconductor Research (CoSR) has been approved by the Ministry of Education and student recruitment will soon follow. President Hocheng Hong said that the institute will be headed by Academician of Academia Sinica Burn J. Lin, whose research in immersion lithography has had a major impact on the semiconductor industry worldwide.
Continue readingCold spray restoration on active flying aircraft
The 28th Maintenance Group Additive Manufacturing Flight, Ellsworth Air Force Base, S.D., conducted its first restoration of an active flying aircraft in May and repaired an over wing faring slip joint.
Continue readingNanoparticles create heat from light to manipulate electrical activity in neurons
A team in the McKelvey School of Engineering at Washington University in St. Louis is using nanoparticles as heaters to manipulate the electrical activity of neurons in the brain and of cardiomyocytes in the heart.
Continue readingNSF awards Clark Atlanta University a $3.6 million research and education grant to develop next generation electronic materials
Clark Atlanta University’s (CAU) departments of chemistry and physics in partnership with researchers at Spelman College and Cornell University were awarded a $3.6 million research and education grant from the National Science Foundation.
Continue readingTDK Ventures backs metal additive manufacturing startup, Fabric8Labs
TDK Corp. announced that subsidiary TDK Ventures Inc. will back Fabric8Labs, marking its second investment in the additive manufacturing space and first in metal printing.
Continue readingOne Minute Mentor: Effect of porosity on the heat treatment of powder metallurgy steels
Porosity has the greatest single effect on the response of PM Steels to heat treatment compared with conventional steels. The majority of parts have a porosity between 5 and 15 vol%, far more than is found in a typical casting. Every mechanism in press and sinter is subject to diminishing returns; i.e., compact density has a decreasing dependence on compaction pressure, as does sintering and homogenization.
Continue readingAir Products announces multi-billion dollar net-zero hydrogen energy complex in Canada
Air Products, Lehigh, Pa., has announced a multi-billion-dollar plan to build a new net-zero hydrogen energy complex in Edmonton, Canada. The $1.3 billion (CAD) net-zero hydrogen production and liquefaction facility expected onstream in 2024 will accelerate the transition to a cleaner, more sustainable energy future.
Continue readingNew grant aims to broaden participation in cutting-edge materials research
The National Science Foundation has awarded grants to eight research teams to support partnerships that will increase diversity in cutting-edge materials research, education, and career development. One of those teams is Penn’s Laboratory for Research on the Structure of Matter and the University of Puerto Rico, whose long-running collaboration has now received an additional six years of support.
Continue readingNewly designed material could make sound travel backward
A team of scientists has proposed a new type of metamaterial that could create backward waves when transmitting sound. They published their design in the journal Nature Communications in June 2021. The team behind the new addition to the metamaterial portfolio was inspired by superfluid helium-4: a liquid form of helium with no viscosity that can only be observed at an extremely low temperature of around minus 450 degrees Fahrenheit.
Continue readingOptomec receives new patents for 3D microprinting with aerosol jet
Optomec, Albuquerque, N.M., an established leader in additive manufacturing solutions for 3D metal printing and 3D-printed electronics, has received new patents covering the use of aerosol Jjt for producing three-dimensional microstructures.
Continue readingNavy and VRC Metal Systems to invest in city of Chesapeake
The Hampton Roads Alliance, Norfolk, VA, announced that VRC Metal Systems LLC, in collaboration with Mid-Atlantic Tech Bridge and the U.S. Navy, is creating an industrial facility in the city of Chesapeake, creating up to 10 new jobs for the Hampton Roads region over a five-year period.
Continue readingSpray Tips: Design of substrate geometry for thermal spray coating processes
Understanding the part geometry is important to fixturing and tooling in order to maintain the proper spray angle. The following acceptable practices and design considerations should be considered for compliance with coating requirements.
Continue readingDr. Yufeng Zhao conducts groundbreaking frontier research in materials science and sustainability
Corban Assistant Professor of Physics, Dr. Yufeng Zhao has partnered with a team at Rice University to conduct groundbreaking new frontier research at the intersection of sustainability and the field of materials science.
Continue readingScientists one step closer to cheap flexible electronics, NUST MISIS reports
The National University of Science and Technology MISIS scientists were part of the international research team that came up with a new method for modulation of optoelectronic properties of single-walled carbon nanotube (SWCNT) films.
Continue readingA blueprint for designing and synthesizing new, multifunctional materials
A new paper in Science Advances, provides a blueprint for designing multifunctional materials using different combinations of nanocrystals. By bringing together theory, computational simulations, chemical synthesis, and assembly, researchers from the University of Pennsylvania and the University of Michigan demonstrate how an “inverse design” strategy can create unique materials from nanocrystals of varying compositions, sizes, and shapes.
Continue readingVerder Scientific acquires Mager Scientific
Verder Scientific has formally agreed to acquire all shares of the U.S. company Mager Scientific Inc., distributor of metallographic and hardness testing equipment.
Continue readingSkylar Tibbits says materials science will make our world less digital and more wondrous
When we picture what materials, design, and manufacturing of the future will look like, it’s easy to imagine digitally enabled smart homes filled with data-mining furniture, assembled by sophisticated robots, and upholstered in biometric synthetic fabrics. But a new book by Skylar Tibbits, a designer and director of MIT’s Self-Assembly Lab, suggests ongoing developments in materials science are poised to make our world a lot less digital—and much more wondrous.
Continue readingFortify, Rogers partner to develop 3D printed dielectric material systems for RF devices
Fortify, a Boston-based 3D printing startup, and Rogers Corp., a global leader in engineered materials for advanced connectivity and power electronics, have partnered to enable additive manufacturing of low-loss dielectric materials for radio frequency (RF) devices and electronics.
Continue readingHyperbolic metamaterial turns conventional light microscope into super-resolution imager
Speckle-MAIN technology, developed by researchers at the University of California, San Diego, involves a specially engineered material that shortens the wavelength of light as it illuminates the sample.
Continue readingOne Minute Mentor: Sintering of power particles
During sintering, metallurgical bonds form between powder particles. Strength, ductility, toughness, and electrical and thermal conductivities increase with increasing density. If different materials were blended together, interdiffusion could promote the formation of alloys and intermetallic phases. As a consequence of the density increases, size decreases.
Continue readingSolar Atmospheres awarded Aerojet Rocketdyne approval
Solar Atmospheres, Greenville, S.C., has been awarded Aerojet Rocketdyne approval, their second aerospace prime approval of 2021.
Continue readingLindberg/MPH ships electrically heated spray washer to the defense industry
Lindberg/MPH, Mich., announced the shipment of an electrically heated spray washer to the defense industry. This spray washer is designed as a companion to a heat-treating process, washing the parts prior to and/or after heat treating.
Continue readingSeco/Warwick introduces Zeroflow
Seco/Warwick, Poland, has introduced a new gas nitriding technology called ZeroFlow to the global industry in cooperation with scientists from the Poznan University of Technology. ZeroFlow reduces process costs while providing more ecologically friendly performance.
Continue reading




























