Constellium to showcase cutting-edge solutions for aluminium automotive structures at CES 2024

Constellium, Paris, exhibited its latest innovations in aluminium Automotive Structures at CES 2024 in Las Vegas from January 9-12. A leading supplier of advanced lightweight aluminium automotive components, Constellium highlighted its sustainable solutions for automakers and consumers. 

Constellium showcased a diverse range of aluminium solutions designed to address the industry’s growing demand for lightweight materials and more sustainable solutions. These components contribute to enhanced vehicle performance and play a pivotal role in reducing carbon emissions, aligning with the global trend toward eco-friendly mobility. Among the products displayed are:  

  • Innovative Crash Management System for electric vehicles
  • Structural Sill providing stiffness and crash resistance
  • Lightweight Battery Enclosure solutions
    • Laser-Welded Battery Enclosure for Cell-to-Module applications
    • Adhesive-Bonded Battery Enclosures for Cell-to-Module or Cell-to-Pack applications
    • Structural Battery Enclosure for Cell-to-Pack or Cell-to-Body applications 

Read further here.

New 3D-printable material to advance sustainable solutions

A research team led by Lawrence Berkeley National Laboratory (Berkeley Lab) has developed “supramolecular ink”, a new technology for use in OLED (organic light-emitting diode) displays or other electronic devices. Made of inexpensive, earth-abundant elements. Supramolecular ink could enable more affordable and environmentally sustainable flat-panel screens and electronic devices.

Principal investigator and a faculty senior scientist in Berkeley Lab’s Materials Sciences Division and professor of chemistry and materials science and engineering at UC Berkeley, Peidong Yang, stated, “By replacing precious metals with Earth-abundant materials, our supramolecular ink technology could be a game changer for the OLED display industry. What’s even more exciting is that the technology could also extend its reach to organic printable films for the fabrication of wearable devices as well as luminescent art and sculpture.”

If you have a relatively new smartphone or flat-panel TV, there’s a good chance it features an OLED screen. OLEDs are rapidly expanding in the display market because they are lighter, thinner, use less energy, and have better picture quality than other flat-panel technologies. OLEDs contain tiny organic molecules that emit light directly, eliminating the need for the extra backlight layer that is found in a liquid crystal display (LCD). However, OLEDs can include rare, expensive metals like iridium.

The Berkeley Lab team recently discovered how the new material could potentially adopt a cheaper fabrication process for electronic displays.

The new material consists of powders containing hafnium (Hf) and zirconium (Zr) that can be mixed in solution at low temperatures – from room temperature up to around 176 degrees Fahrenheit (80 degrees Celsius) – to form a semiconductor ink.

Additional experiments at UC Berkeley showed that the supramolecular ink is also compatible with 3D printing technologies such as for the design of decorative OLED lighting.

Cheng Zhu, a Ph.D. candidate in materials science and engineering at UC Berkeley added that manufacturers could also use the supramolecular ink to fabricate wearable devices or high-tech clothing that illuminates for safety in low-light conditions, or wearable devices that display information through the supramolecular light-emitting structures.

For more information: Berkley Lab

Scientists announce breakthrough in hypersonic heat shield

In a giant leap for future hypersonic flight, Chinese scientists have turned to multi-scale technology to develop a revolutionary new material that has achieved record high marks in tests for vital strength and thermal insulation properties.

The scientists say their porous ceramic creation opens the door to wider exploration in the fields of aerospace, chemical engineering and energy transfer and production.

“For the first time, it is reported a multi-scale structure design and fast fabrication of … high-entropy ceramics via an ultrafast high-temperature synthesis technique that can lead to exceptional mechanical load-bearing capability and high thermal insulation performance,” the researchers said.

Scientists have long faced challenges in developing strong, lightweight materials boasting low-thermal conductivity that are critical, especially for hypersonic travel. Ceramic materials offer promise because they exhibit low thermal conductivity, high melting points and corrosion resistance, and they are also non-combustible.

But exploration projects at great depths below the Earth’s surface as well as in outer space encounter extremely high temperatures and pressure. Traditional ceramic materials are insufficient in those instances.

Lightweight, porous materials offered low thermal transfer but that desirable property often came with a tradeoff—greater fragility.

In their report, “Ultrastrong and High Thermal Insulating Porous High-Entropy Ceramics up to 2000 °C,” researchers at Guangzhou University School of Materials Science and Engineering stated, “It is imperative to find ways to simultaneously improve the mechanical strength and thermal insulation capacity of porous ceramics.”

So they turned to the concept of high-entropy design to come up with a porous ceramic material that achieved a good balance between strength and heat resistance without the usual downsides.

High-entropy design focuses on the use of equal measures of multiple elements that can be used to create stronger, more heat-resistant and more stable components.

The researchers developed a material that achieved the demanding insulation and weight criteria for aerospace flight. Their new ceramic creation, which goes by the unassuming name 9PHEB—9-cation porous high-entropy diboride—provides “exceptional thermal stability” and “ultrahigh compressive strength,” the researchers said.

“High-quality interfaces, characterized by strong bonding without defects or amorphous phases, can promote the rapid force transfer along the building block and to many other ones through connections upon loading, leading to a significant enhancement of mechanical strength,” the report said.

For more information: Advanced Materials

Image: Morphology and statistics of the fabricated 9PHEB samples after acid corrosion. (a) SEM image of the samples with a porosity of ~50%. (b) Statistics of the grain sizes. The average grain size is calculated to be 1.07±0.31 μm.

Portable mass spectrometer components made via 3D printing

Using additive manufacturing, researchers at the Massachusetts Institute of Technology (MIT) in Cambridge, Mass., produced a mass filter, which is the core component of a mass spectrometer, that is far lighter and cheaper than the same type of filter made with traditional techniques and materials.

Continue reading

Office of Naval Research-sponsored research could potentially lead to millions of new materials

A research team, led by the Office of Naval Research (ONR) Principal Investigator, Dr. Stefano Curtarolo, Duke University, developed a computational method for creating new types of ceramics using transition metals – carbonitrides or borides – through a process called Disordered Enthalpy-Entropy Descriptor (DEED).

The applications are endless, said Dr. Eric Wuchina, a research materials engineer who was the program officer with ONR’s Sea Warfare and Weapons department when Curtarolo’s research team was awarded the Multidisciplinary University Research Initiative (MURI).

Wuchina said. “Now we can help design any material for high voltage, breakdown resistance for strength, for high-temperature capability, for high or low thermal conductivities – a variety of things that you can do because of the thermodynamic database that Professor Curtarolo has been putting together for the last 20-25 years.”

Curtarolo’s team maintains the Duke Automatic-FLOW for Materials Database (AFLOW)—a database that allows algorithms to accurately predict the properties of unexplored mixtures without having to create them in the laboratory.

“We’ve used the same iron, copper, nickel and other alloys throughout history and just added stuff in to change the properties,” Wuchina said. “Rather than limit ourselves to just 10 chemical elements, this allows us to look at the whole periodic table of 100 elements – and to look at a variety of different compositions.”

According to Wuchina, the variety of new compositions could create potentially millions of new materials.

“Professor Curtarolo has developed the ability for us to look at a wide variety of materials and potential materials that have never been made and predict what their properties are going to be. And then how to make real materials out of those for applications for specific applications.”

So far, DEED has predicted 900 possible new formulations of high-performance materials – 17 of which have already been successfully created in laboratories.

Instead of focusing solely on the orderly atomic structure of conventional materials, Curtarolo’s team worked to develop the predictive properties of “high-entropy” materials – that is, materials that could be created through a chaotic mixture of atoms.

“The high-entropy carbides all had a relatively uniform amount of enthalpy, so we could ignore part of the equation,” Curtarolo said. “But to predict new ceramic recipes with other transition metals, we had to address the enthalpy.”

Enthalpy is a measure of the sturdiness of a design while entropy is the number of possible designs that have similar strength. Curtarolo’s computational method not only calculates what elements need to go into creating a ceramic for a certain application, but also how to arrange the microstructure – the atoms – so that it has also high-temperature capabilities.

“Typically to get higher or lower thermal conductivity you will use a ceramic,” Wuchina said. “You might make it a little more porous so that it has better-insulating properties, right? Well, how do you do that without harming the mechanical properties?”

That’s what makes Curtarolo’s research and computational method so unique. It allows him to predict how different compounds will behave and to what applications these new compounds would be best suited.

Wuchina said. “The DEED process can capture and develop a wide range of materials and the materials properties that we don’t have now, and it allows us to use computational tools to tell us what compositions and what microstructures are best and how to make them. And that’s something that has historically been trial and error.”

For more information: Nature

Ancient graphite reveals a quantum surprise

Scientists at The University of Manchester’s National Graphene Institute have discovered new physics in graphite through the application of twistronics, revealing a 2.5-dimensional mixing of surface and bulk states. The research opens new possibilities in controlling electronic properties in both 2D and 3D materials.

Continue reading

Solar Atmospheres of California adds Airbus approval

Solar Atmospheres, Fontana, Calif., has announced that they are now Airbus approved for heat treating.

Frank Trujillo, director of Sales for Solar Atmospheres of California, stated that, “Many Airbus suppliers were in need of a heat treater in the West that could process parts, plates and bars in support of increased Airbus production rates. SCA is proud to be a partner on the Airbus Team!”

With our wide range of furnaces, we are capable of processing very small pieces or loads of 50,000 pounds and up to 24 feet in length. This approval will translate into improved lead-times and greater efficiencies for all Airbus suppliers that require heat treat services in the Western Region.

Read further here.

 

Nitrex installs nitriding system at Akademi Metalurji

Nitrex Vacuum, Quebec, has installed a turnkey nitriding system at Akademi Metalurji, a full-service commercial heat-treating solutions provider located in Turkey. The project includes a mid-sized pit-type furnace, advanced controls, three process technologies along with accelerated cooling. 

The decision to invest in a new nitriding system was driven by the company’s objective to overcome efficiency and quality challenges faced with their previous furnace at the Gebze facility. The prior system consumed excessive amounts of process gases and yielded inconsistent nitriding results. With the addition of a Nitrex NX-1015 pit furnace, Akademi Metalurji can now save on process gases and production time, while also expanding their heat treatment capabilities to accommodate wider-dimensioned parts. The nitriding furnace offers an effective work zone of 39” diameter by 59” high (1000 x 1500 mm) and can handle a load of up to 4400 lbs. (2000 kg). The supplied library of Nitreg-based recipes is tailored to meet different application requirements, resulting in a hardened surface that is highly wear-resistant. For applications like machinery components, tooling, dies, and molds, where Akademi Metalurji specializes, Nitreg delivers improved tooling performance, ensuring longer service life and higher throughput. Ultimately, this leads to tool cost savings for their customers.

The system was successfully installed at the Gebze facility, located southeast of Istanbul, and commenced operations in April 2023. Since then, it has been running smoothly, delivering excellent results.

Read further here.