Inspecting, testing, and measuring SiC

Achieving the auto industry’s stringent zero-defect goals is becoming a big challenge for makers of silicon carbide substrates, which are struggling to achieve sufficient yields and reliability as they migrate from 150 to 200 mm wafers and shift their focus away from pure silicon.

Continue reading

EU and Japan team up to develop new advanced materials

The EU and Japan are strengthening their research relationship with the launch of an enhanced dialogue on advanced materials.

Under this agreement, the EU and Japan will work on developing new materials that are used in critical sectors of the economy, such as renewable energy, batteries, zero-emission buildings and semiconductors. It aims to create a platform for sharing information on policy developments and exploring collaborative research opportunities.

The EU said these materials are also important for both the green and digital transitions and are a “vital part of economic sovereignty and strategic independence”.

The EU describes advanced materials as those that are engineered to display superior performance or special functions. A key example is graphene, a one-atom-thick layer of carbon that has many potential applications due to its flexibility and conductivity.

The EU expects the demand for advanced materials to increase significantly in the coming years and believes itself – and Japan – have a global lead in this technology. The agreement follows a recent strategy proposed by the European Commission to move towards “EU industrial leadership” in advanced materials.

The new agreement builds on the success of the EU’s collaboration with Japan in material sciences, which included the development of new materials for the substitution of critical metals and advanced materials for power electronics. EU commissioner Iliana Ivanova said the new dialogue on advanced materials “strengthens our cooperation with Japan in research and innovation”.

“These materials are critical for our transition to a green future, and by joining forces, we can get there faster,” Ivanova said. “I look forward to seeing the results of this new cooperation with Japan.”

For more information: European Commission

Rice researchers develop 3D-printed wood from its own natural components

Researchers at Rice University have unlocked the potential to use 3D printing to make sustainable wood structures, offering a greener alternative to traditional manufacturing methods.

Wood has historically been marred by wasteful practices generated during shaping processes, driving up costs and environmental impact. Now researchers in materials science and nanoengineering at Rice have developed an additive-free, water-based ink made of lignin and cellulose, the fundamental building blocks of wood. The ink can be used to produce architecturally intricate wood structures via a 3D printing technique known as direct ink writing.

“The ability to create a wood structure directly from its own natural components sets the stage for a more eco-friendly and innovative future,” said Muhammad Rahman, an assistant research professor of materials science and nanoengineering at Rice. “It heralds a new era of sustainable 3D-printed wood construction.”

The implications are far-reaching, potentially revolutionizing industries such as furniture and construction.

“Unlike previous attempts, this method exclusively uses nanoscale wood components for 3D printing, marking a significant advancement in the field,” said Pulickel Ajayan, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and professor and chair of materials science and nanoengineering.

The university’s research focused on optimizing the composition of the ink by adjusting the ratio of lignin, cellulose nanofibers and nanocrystals while maintaining the natural lignin-cellulose balance, according to both M.S.H Thakur and Chen Shi, lead co-authors on the study.

Although lignin is one of the most abundant biopolymers on Earth, it is the least-valued product in industries, noted Amit Naskar, a project collaborator and senior research and development staff at Oak Ridge National Laboratory.

Post-printing, comprehensive analyses were conducted to assess the surface and internal structures of the 3D printed wood, comparing it to natural wood counterparts. The payoff not only exhibited close similarities to natural wood in texture but also in scent and strength.

Additionally, mechanical tests were performed to evaluate compressive and bending strengths, revealing promising results that surpassed those of natural balsa wood.

For more information: Science Advances

Image: Muhammad Rahman (center), an assistant research professor of materials science and nanoengineering at Rice and his lab. Photo courtesy of Gustavo Raskosky/Rice University. 

Scientists reveal the first unconventional superconductor that can be found in mineral form in nature

Scientists from Ames National Laboratory have identified the first unconventional superconductor with a chemical composition also found in nature. Miassite is one of only four minerals found in nature that act as a superconductor when grown in the lab. The team’s investigation of miassite revealed that it is an unconventional superconductor with properties similar to high-temperature superconductors. Their findings further scientists’ understanding of this type of superconductivity, which could lead to more sustainable and economical superconductor-based technology in the future.

Superconductivity is when a material can conduct electricity without energy loss. Superconductors have applications including medical MRI machines, power cables, and quantum computers. Conventional superconductors are well understood but have low critical temperatures. The critical temperature is the highest temperature at which a material acts as a superconductor.

In the 1980s, scientists discovered unconventional superconductors, many of which have much higher critical temperatures. According to Ruslan Prozorov, a scientist at Ames Lab, all these materials are grown in the lab. This fact has led to the general belief that unconventional superconductivity is not a natural phenomenon.

Prozorov explained that it is difficult to find superconductors in nature because most superconducting elements and compounds are metals and tend to react with other elements, like oxygen. He said that miassite (Rh17S15) is an interesting mineral for several reasons, one of which is its complex chemical formula. “Intuitively, you think that this is something which is produced deliberately during a focused search, and it cannot possibly exist in nature,” said Prozorov, “But it turns out it does.”

Paul Canfield, Distinguished Professor of Physics and Astronomy at Iowa State University and a scientist at Ames Lab, has expertise in the design, discovery, growth, and characterization of novel crystalline materials. He synthesized high-quality miassite crystals for this project. “Although miassite is a mineral that was discovered near the Miass River in Chelyabinsk Oblast, Russia,” said Canfield, “it is a rare one that generally does not grow as well-formed crystals.”

Growing the miassite crystals was part of a larger effort to discover compounds that combine very high melting elements (like Rh) and volatile elements (like S). “Contrary to the nature of the pure elements, we have been mastering the use of mixtures of these elements that allow for low-temperature growth of crystals with minimal vapor pressure,” said Canfield. “It’s like finding a hidden fishing hole that is full of big fat fish. In the Rh-S system, we discovered three new superconductors. And, through Ruslan’s detailed measurements, we discovered that the miassite is an unconventional superconductor.”

Prozorov’s group specializes in advanced techniques to study superconductors at low temperatures. He said the material needed to be as cold as 50 millikelvins, which is about -460 degrees Fahrenheit.

Prozorov’s team used three different tests to determine the nature of miassite’s superconductivity. The main test is called the “London penetration depth.” It determines how far a weak magnetic field can penetrate the superconductor bulk from the surface. In a conventional superconductor, this length is basically constant at low temperatures. However, in unconventional superconductors, it varies linearly with the temperature. This test showed that miassite behaves as an unconventional superconductor.

Another test the team performed was introducing defects into the material. Prozorov said that this test is a signature technique his team has employed over the past decade. It involves bombarding the material with high-energy electrons. This process knocks out ions from their positions, thus creating defects in the crystal structure. This disorder can cause changes in the material’s critical temperature.

Conventional superconductors are not sensitive to non-magnetic disorders, so this test would show no or very little change in the critical temperature. Unconventional superconductors have a high sensitivity to disorder, and introducing defects changes or suppresses the critical temperature. It also affects the critical magnetic field of the material. In miassite, the team found that both the critical temperature and the critical magnetic field behaved as predicted in unconventional superconductors.

Investigating unconventional superconductors improves scientists understanding of how they work. Prozorov explained that this is important because, “Uncovering the mechanisms behind unconventional superconductivity is key to economically sound applications of superconductors.”

For more information: Communications Materials

Image: A miassite crystal grown by Paul Canfield.

A new world of 2D material is opening up

Materials that are incredibly thin, only a few atoms thick, exhibit unique properties that make them appealing for energy storage, catalysis and water purification. Researchers at Linköping University have now developed a method that enables the synthesis of hundreds of new 2D materials.

Since the discovery of graphene, the field of research in extremely thin materials, so-called 2D materials, has increased exponentially. The reason is that 2D materials have a large surface area in relation to their volume or weight. This gives rise to a range of physical phenomena and distinctive properties, such as good conductivity, high strength or heat resistance, making 2D materials of interest both within fundamental research and applications.

“In a film that’s only a millimetre thin, there can be millions of layers of the material. Between the layers there can be a lot of chemical reactions and thanks to this, 2D materials can be used for energy storage or for generating fuels, for example,” says Johanna Rosén, professor in Materials physics at Linköping University.

The largest family of 2D materials is called MXenes. MXenes are created from a three-dimensional parent material called a MAX phase. It consists of three different elements: M is a transition metal, A is an (A-group) element, and X is carbon or nitrogen. By removing the A element with acids (exfoliation), a two-dimensional material is created. Until now, MXenes has been the only material family created in this way.

The Linköping researchers have introduced a theoretical method for predicting other three-dimensional materials that may be suitable for conversion into 2D materials. They have also proved that the theoretical model is consistent with reality.

To succeed, the researchers used a three-step process. In the first step, they developed a theoretical model to predict which parent materials would be suitable. Using large-scale calculations at the National Supercomputer Centre, the researchers were able to identify 119 promising 3D materials from a database and a selection consisting of 66,643 materials.

The next step was to try to create the material in the lab.

“Out of 119 possible materials, we studied which ones had the chemical stability required and which materials were the best candidates. First, we had to synthesise the 3D material, which was a challenge in itself. Finally, we had a high-quality sample where we could exfoliate and etch away a specific atom layers using hydrofluoric acid,” says Jie Zhou, assistant professor at the Department of Physics, Chemistry and Biology.

The researchers removed yttrium (Y) from the parent material YRu2Si2, which resulted in the formation of two-dimensional Ru2SixOy.

But to confirm success in the lab, verification is necessary – step three. The researchers used the scanning transmission electron microscope Arwen at Linköping University. It can examine materials and their structures down at the atomic level. In Arwen it is also possible to investigate which atoms a material is made up of using spectroscopy.
“We were able to confirm that our theoretical model worked well, and that the resulting material consisted of the correct atoms. After exfoliation, images of the material resembled the pages of a book. It’s amazing that the theory could be put into practice, thereby expanding the concept of chemical exfoliation to more materials families than MXenes,” says Jonas Björk, associate professor at the division of Materials design.

The researchers’ discovery means that many more 2D materials with unique properties are within reach. These, in turn, can lay the foundation for a plethora of technological applications. The next step for the researchers is to explore more potential precursor materials and scale up the experiments. Johanna Rosén believes that future applications are almost endless.

“In general, 2D materials have shown great potential for an enormous number of applications. You can imagine capturing carbon dioxide or purifying water, for example. Now it’s about scaling up the synthesis and doing it in a sustainable way,” says Johanna Rosén.

For more information: Science

Image: In the electron microscope Arwen materials can be studied at an atomic level.

Material insights enable new, high-speed electronics

A new study conducted by researchers from the University of Delaware’s Center for Composite Materials (CCM) and DuPont Specialty Products, Wilmington, Del., now provides insights about a composite material that can be used to make thin, flexible and durable circuit boards.

Continue reading

LLNL scientists advance light-responsive material

Researchers at Lawrence Livermore National Laboratory, Livermore, Calif., have furthered a new type of soft material that can change shape in response to light, a discovery that could advance “soft machines” for a variety of fields, from robotics to medicine.

Continue reading

Haynes International announces agreement to be acquired by North American Stainless, a wholly owned subsidiary of Acerinox

Haynes International, Inc., Kokomo, Ind., a leading developer, manufacturer and marketer of technologically advanced high-performance alloys, announced it entered into a definitive agreement to be acquired by North American Stainless, a wholly owned subsidiary of Acerinox, Spain, in an all-cash transaction valuing the Company at an enterprise value of approximately $970 million and representing a multiple of 12.3x fiscal 2023 EBITDA.

Continue reading

Spray Tips: Particle classification by sieve analysis

In powder manufacture, particle size distribution, known as classification, categorizes powders into groups or cuts; sieving, the primary method for separating powders into their size fractions, serves as a diagnostic tool for quality assessment or a manufacturing technique for selecting specific size distributions.

Continue reading

Physicists detect elusive ‘Bragg glass’ phase with machine learning tool

Cornell quantum researchers have detected an elusive phase of matter, called the Bragg glass phase, using large volumes of x-ray data and a new machine learning data analysis tool. The discovery settles a long-standing question of whether this almost–but not quite–ordered state of Bragg glass can exist in real materials.

The lead author is Krishnanand Madhukar Mallayya, postdoctoral researcher in the Department of Physics in the College of Arts and Sciences (A&S). Eun-Ah Kim, professor of physics (A&S), is the corresponding author. The research was conducted in collaboration with scientists at Argonne National Laboratory and at Stanford University.

The researchers present the first evidence of a Bragg glass phase as detected from X-ray scattering, which is a probe that accesses the entire bulk of a material, as opposed to just the surface of a material, in a systematically disordered charge density wave (CDW) material, PdxErTe3. They used comprehensive X-ray data and a novel machine learning data analysis tool, X-ray Temperature Clustering (X-TEC).

“Despite its theoretical prediction three decades ago, concrete experimental evidence for CDW Bragg glass in the bulk of the crystal remained missing,” Mallayya said.

Theoretically, there is a sharp distinction between three phases: long-range order, Bragg glass, and disordered state, Kim said. In the disordered state, the CDW correlation decays within a finite distance. In the long-range ordered state, the charge density wave correlation continues indefinitely.

In the Bragg glass phase, Kim went on, the CDW correlation does decay, but so slowly that it will only completely vanish at infinite distances.

“The challenge is detecting these distinctions from experimental data that also reflects real-life issues like noise and finite resolution of the experimental setup,” Kim said.

The researchers overcame key challenges through strategic synergy among materials, data and machine-learning tools. On the materials front, they found, in collaboration with scientists at Stanford, a family of CDW materials that will allow a systematics study with a control over dirt to use in the experiment – PdxErTe3. On the data front, they took massive amounts of data at Argonne National Laboratory in collaboration with Argonne scientists.

On the machine learning front, they used X-TEC, a machine learning tool, to analyze the massive volume of data with a scalable and automated approach.

“An experimental detection of Bragg glass phase through X-ray diffraction has settled the open question regarding the fate of CDW order subject to dirt,” Mallayya said.

Going beyond the specific scientific problem, the paper presents a new mode of research in the age of large data, Kim said: “Using machine learning tools and data-scientific perspectives, we can go after challenging questions and track down subtle signatures through a comprehensive data analysis.”

The researchers wrote that this detection of Bragg glass order and the resulting phase diagram significantly advance our understanding of the complex interplay between disorder and fluctuations. Moreover, using X-TEC to target fluctuations through a high-throughput measure of “peak spread” can revolutionize how the fluctuations are studied in scattering experiments.

For more information: Cornell University

Revolutionizing surface science: A new horizon in superhydrophobic materials

Superhydrophobic surfaces, which repel water strongly, are useful for self-cleaning, anti-corrosion, and oil/water separation. Traditional methods to create these surfaces are complex and material-specific. Recent innovations include 3D printing for customizable surfaces and hydrothermal methods for durable coatings. A new approach using femtosecond laser and chemical treatments promises easier creation of these surfaces on various materials, offering great stability and wide application potential.

Superhydrophobic surfaces, characterized by their ability to repel water with a contact angle above 150° and a sliding angle below 10°, offer a range of applications from self-cleaning and anti-corrosion to oil/water separation and droplet manipulation. Traditionally, creating such surfaces has been challenging, requiring complex, time-consuming, or material-specific methods. Recent advancements, however, include innovative techniques like 3D printing for adjustable porosity, hydrothermal methods for antibacterial coatings, and soft-imprinting for lotus-inspired textures. Despite these developments, a need for simpler, versatile methods persists.

A new study focused on a novel technique for creating superhydrophobic surfaces that can repel water effectively.

This new method for creating water-repellent surfaces has two main steps. First, a special laser (femtosecond laser) is used to carve tiny patterns on different materials. This carving is really detailed, making small structures that help enhancing surface roughness. Next, these laser-carved surfaces are coated with stearic acid, a substance that makes them water-repellent by reducing surface energy. This combination of laser carving and chemical coating creates a strong water-repellent surface. What’s great about this method is that it can be used on many different materials like metals, ceramics, and plastics, making it more versatile than older techniques. This could be really useful for things like keeping electronic devices safe from water or improving medical tools.

Professor YIN Kai, the lead researcher, stated, “Our femtosecond laser-chemical hybrid processing technique marks a significant advancement in material science, offering a versatile approach to creating superhydrophobic surfaces on varioussubstrate.”

The femtosecond laser-chemical hybrid processing technique represents a leap forward in the creation of superhydrophobic surfaces, with potential implications across a broad range of fields. By enabling the application of superhydrophobic coatings on variousmaterial, this research paves the way for innovations in surface science and technology.

For more information: Journal of Central South University

Image: Fabrication of substrate-independent superhydrophobic surfaces: (a) Schematic diagram for fabrication of substrate-independent superhydrophobic surfaces; (b) Photos of the water droplets placed on the Pristine ceramic, Ti, Si, and quartz glass, respectively; (c) Optical photos and static contact angles of the water droplets placed on the LTC-SA, LTT-SA, LTS-SA, and LTQ-SA, respectively; (d) Comparison of WCAs on pristine and treated samples surfaces; (e) Comparison between our proposed method and previously reported other preparation methods for superhydrophobic surfaces.

Compressor cracks cited in Canadian helo crash

Fractures in the sixth-stage compressor wheel triggered a catastrophic engine failure and caused the April 2022 fatal crash of a Kestrel Helicopters 1981 Hughes 369D during long-line slinging operations in British Columbia, according to a recently released report from Canada’s Transportation Safety Board.

Continue reading