‘Writing’ with atoms could transform materials fabrication for Quantum devices

Scientists at the Department of Energy’s Oak Ridge National Laboratory have developed a groundbreaking advanced microscopy tool that can precisely place individual atoms, enabling the creation of new materials with unique properties for quantum computing and communication devices that cannot be produced by conventional methods.

“By working at the atomic scale, we also work at the scale where quantum properties naturally emerge and persist,” said Stephen Jesse, a materials scientist who leads this research and heads the Nanomaterials Characterizations section at ORNL’s Center for Nanophase Materials Sciences, or CNMS. “We aim to use this improved access to quantum behavior as a foundation for future devices that rely on uniquely quantum phenomena, like entanglement, for improving computers, creating more secure communications and enhancing the sensitivity of detectors.”

To accomplish improved control over atoms, the research team created a tool they call a synthescope for combining synthesis with advanced microscopy. The researchers used a scanning transmission electron microscope, or STEM, transformed into an atomic-scale material manipulation platform. The synthescope will advance the state of the art in fabrication down to the level of the individual building blocks of materials. This new approach allows researchers to place different atoms into a material at specific locations; the new atoms and their locations can be selected to give the material new properties.

“Classical computers use bits, which can be either 0 or 1, and do calculations by flipping these bits,” said ORNL’s Ondrej Dyck, a materials scientist contributing to the research. “Quantum computers use qubits, which can be both 0 and 1 at the same time. The qubits can also become entangled, with one qubit connected to the state of another. This entangled system of qubits can be used to solve certain problems much faster than classical computers. The tricky part is keeping these delicate qubits stable and working correctly in the real world.

“One strategy to tackle these challenges is to build and operate at the scale where quantum mechanics exist more naturally—at the atomic scale. We realized that if we have a microscope that can resolve atoms, we may be able to use the same microscope to move atoms or alter materials with atomic precision. We also want to be able to add atoms to the structures we create, so we need a supply of atoms. The idea morphed into an atomic-scale synthesis platform—the synthescope.”

That is important because the ability to tailor materials atom-by-atom can be applied to many future technological applications in quantum information science, and more broadly in microelectronics and catalysis, and for gaining a deeper understanding of materials synthesis processes. This work could facilitate atomic-scale manufacturing, which is notoriously challenging.

“Simply by the fact that we can now start putting atoms where we want, we can think about creating arrays of atoms that are precisely positioned close enough together that they can entangle, and therefore share their quantum properties, which is key to making quantum devices more powerful than conventional ones,” Dyck said.

Such devices might include quantum computers — a proposed next generation of computers that may vastly outpace today’s fastest supercomputers; quantum sensors; and quantum communication devices that require a source of a single photon to create a secure quantum communications system.

By using an electron beam, or e-beam, to remove and deposit the atoms, the ORNL scientists could accomplish a direct writing procedure at the atomic level.

“The process is remarkably intuitive,” said ORNL’s Andrew Lupini, STEM group leader and a member of the research team. “STEMs work by transmitting a high-energy e-beam through a material. The e-beam is focused to a point smaller than the distance between atoms and scans across the material to create an image with atomic resolution. However, STEMs are notorious for damaging the very materials they are imaging.”

The scientists realized they could exploit this destructive “bug” and instead use it as a constructive feature and create holes on purpose. Then, they can put whatever atom they want in that hole, exactly where they made the defect. By purposely damaging the material, they create a new material with different and useful properties.

“We’re exploring methods to create these defects on demand so we can place them where we want to,” Jesse said. “Since STEMs have atomic-scale imaging capabilities, and we work with very thin materials that are only a few atoms in thickness, we can see every atom. So, we are manipulating matter at the atomic scale in real time. That’s the goal, and we are actually achieving it.”

For more information: Nano Letters

Image: This artistic rendering shows a way to make materials atom-by-atom. The electron beam ejects a carbon atom from graphene, and a different atom bonds at the vacancy.

High-impact research to be revealed at Heat Treat 2017

More than 125 presentations of original, unpublished work will be delivered when the ASM Heat Treating Society convenes for its 29th conference and exhibition in Columbus, Ohio, October 24-26. The information exchanged in these sessions – as researchers and practitioners share their latest discoveries, theories, and advancements – will have a significant impact on design and manufacturing innovation as well as the fortunes of industry.

Continue reading

HTS Members Receive ASM Awards

Four members of the ASM Heat Treating Society will be recognized this year at ASM’s annual Awards Dinner, Tuesday, October 29, Le Westin Hotel, Montreal, Quebec, Canada.   Mr. William J. Bernard, Jr., FASM, President and CEO, Surface Combustion, Inc.

Continue reading

Women In Engineering Profile: Danielle Cote

This profile series introduces leading materials scientists from around the world who happen to be females. Here we speak with Danielle Cote, assistant professor at Worcester Polytechnic Institute, Worcester, Mass.

What part of your job do you like most?

The ability to enjoy the benefits of both teaching and research. The instant and regular gratification of teaching and the longterm payoff of research breakthroughs complement each other to create a very satisfying role.

What is your engineering background?

I have a bachelor’s degree in chemical engineering, and a master’s and a doctorate in materials science and engineering.

What attracted you to engineering?

My love of science and math in high school led me to pursue engineering in college. Realizing the real-world impact I could have with an engineering education furthered my interest in the field. While I still love science and math, it’s a desire to create a positive impact through engineering that keeps me excited.

Did you ever consider doing something else with your life besides engineering?

I played flute and piccolo throughout high school and college and really considered majoring in music performance.

Best career advice, given or received?

If you love what you do, it’s hard to call it “work.”

What are you working on now?

My research group focuses on feedstock material development for high deposition rate additive manufacturing (AM) techniques, such as cold spray and wire arc additive manufacturing. We use computational thermodynamic and kinetic simulations, coupled with advanced materials characterization to design metallic alloys for use in these AM techniques.

Finish this sentence: Women in materials engineering are…

…advancing. Let’s keep it up!

Hobbies?

Traveling. Also cooking (but mostly eating) good food.

Favorite motto or quote?

“Luck is what happens when preparation meets opportunity.” – Seneca

Last book read?

An advanced thermodynamics textbook to prepare for an upcoming course!

 

Do you know someone who should be featured in an upcoming Women in Engineering profile? Contact Vicki Burt at [email protected].

IMS announces Metallography, Microstructure, and Analysis paper as the winner of the Buehler Best Paper Award for 2012

The International Metallographic Society announced that the winner of the Buehler Best Paper Award for 2012  is “Full-Thickness Decarburization of the Steel Shell of an Annealing Furnace” by Amber M. Dalley.   The article was published in the February 2012  issue of Metallography, Microstructure, and Analysis. The award was officially announced at the IMS Awards Banquet in Indianapolis, Indiana on August 7, 2013. The award is sponsored by Buehler and includes a plaque and a check for $1,000.

Continue reading

Dr. Kallarackel T. Jacob Selected as the 2022 Recipient of the J. Willard Gibbs Phase Equilibria Award

ASM International is pleased to announce that Dr. Kallarackel T. Jacob, Professor, Department of Materials Engineering, Indian Institute of Science, Bangalore, India, is the 2022 J. Willard Gibbs Phase Equilibria Award recipient. His citation reads:

“For outstanding leadership in research and education in the area of thermodynamics and phase equilibria of metal and ceramic systems, encompassing innovation in experimental techniques and applications to materials processing.”

The Gibbs Award was established in 2007 to recognize outstanding contributions to the field of phase equilibria. The award honors J. Willard Gibbs, one of America’s greatest theoretical scientists.  Originally proposed by the ASM Alloy Phase Diagram Committee, the award supports ASM’s strong brand identity and reputation in the field of phase diagrams. The J. Willard Gibbs Phase Equilibria Award is endowed by QuesTek Innovations LLC.

In addition to many other contributions, Gibbs laid the thermodynamics foundations of phase equilibria with his brilliant essay, “On the Equilibrium of Heterogeneous Substances,” published in 1876 and in 1878 in the Transactions of the Connecticut Academy.  

Women In Engineering: Melanie Buziak

This profile series introduces materials scientists from around the world who happen to be females. Here we speak with Melanie Buziak, a student at the University of Tennessee, Knoxville.

 

What does your typical workday look like?

As a first-year master’s student with both a teaching and research assistantship, my schedule varies by the hour. My thesis is about additively manufactured precipitation hardenable 17-4 and 15-5 stainless steel and my teaching assistantship is with UT’s Office of Undergraduate Research. When I am not in class or the lab, I am working with students who are interested in getting involved in undergraduate research. I also help provide support for students who are already involved in research to participate in poster competitions or travel to conferences.

 

What part of your job do you like most?

Working in the Office of Undergraduate Research, I enjoy interacting with students interested in expanding their academic knowledge to laboratories or field work. I know my success is highly attributable to certain professors and teachers taking time out of their day to help me identify and prepare for the next steps in my education. I like to be that same support for students as they work to accomplish the same steps. The COVID-19 pandemic has limited our office’s interactions with students. Despite the challenge of making virtual interactions engaging to students, I am fortunate to work with passionate people ready to take on unprecedented challenges with dynamic solutions. What I like most about my job is the people and everything they have to share.

 

What is your greatest professional achievement?

My involvement in ASM’s Women in Materials Engineering’s Retention subcommittee and recent appointment to the Inclusion, Diversity, Awareness, & Equity (IDEA) committee has been the most exciting and fulfilling achievement thus far in my career.

 

Best career advice, given or received:

“Always read the manual. Then bring it with you.” – Dr. Chris Wetteland, my undergraduate lab

Instructor

 

 

Do you know someone who should be featured in an upcoming Women in Engineering profile? Contact Vicki Burt at [email protected]

Get the latest on titanium brazing

An article by one of the leading authorities on titanium brazing – vetted and accepted for publication in the peer-reviewed ASM Handbook, Volume 6, Welding, Brazing, and Soldering – is now available online in digital form. “Brazing of Conventional Titanium Alloys,” a comprehensive, fact-filled survey by industry expert Alexander E. Shapiro, Ph.D., Titanium Brazing Inc., offers in-depth analysis and practical advice on how to braze commercially pure and alloyed titanium with itself as well as with other materials such as copper, stainless steel, carbon steel, ceramics, graphite, and titanium aluminide.

Continue reading

Supersonically Deposited Antiviral Copper Coatings

Contact-mediated, or fomite, transmission of the novel coronavirus from contaminated high-touch surfaces has been shown to be non-negligible. In response, researchers are developing materials to mitigate this transmission, including using copper and copper coatings. In this digital-first article from Advanced Materials & Processes, ASM International’s flagship magazine, researchers from the Worcester Polytechnic Institute in Massachusetts share their studies, which show enhanced antiviral performance is associated with antipathogenic copper material consolidation obtained using cold spray processing.

Continue reading

Women In Engineering: Deidra Minerd

Women In Engineering: Deidra Minerd

This profile series introduces materials scientists from around the world who happen to be females. Here we speak with Deidra Minerd, operations manager, Euclid Heat Treating, Ohio.

What does your typical workday look like?

I spend part of my day quoting and pricing jobs. The quoting part involves reviewing the heat treat requirements and comparing them to our process capabilities. Sometimes that involves digging through specs and quality requirements, making sure we can meet them and figuring out what it would cost. The other part of my day is spent communicating with all the departments and managing the processes. This may involve balancing customer demands with equipment availability or personnel needs with anticipated order volumes.

What part of your job do you like most?

The type of leadership I strive for is “servant leadership.” I aim to provide our employees what they need to do a good job serving our customers in a timely, efficient way. Put another way, I try to remove obstacles that would otherwise prevent supervisors and shop floor employees from getting parts heat treated properly and out the door. The best part of my job is when we find a way to do something better or more efficiently, which makes the employees’ lives easier and makes the customer happy.

What is your engineering background?

I received my B.S. in metallurgical engineering from The Ohio State University. I worked as a sales engineer at Therm-O-Disc before coming to Euclid Heat Treating.

What attracted you to engineering?

I decided to pursue metallurgical engineering with the intent of working at Euclid Heat Treating. I didn’t know anything about engineering until I enrolled in the program. It was a great fit though, because I like science and math.

Did you ever consider doing something else with your life besides engineering?

Yes! I started out in the pharmacy program at the University of Toledo, then decided I would like to try working at Euclid Heat Treating, which was started by my grandfather. I switched schools and majors, and figured if I didn’t like metallurgical engineering, I would switch back to pharmacy. However, I loved it and was hooked.

Best career advice, given or received:

Take every opportunity to learn something. It doesn’t have to be formal credit-based, degreed learning. Have conversations with people who know things you don’t, ask questions, watch webinars, and read books. Assume everyone has something to teach you.

Are you actively engaged with ASM or its affiliates?

I am a member of the ASM Cleveland Chapter and also serve as secretary on the board of the Heat Treating Society, an affiliate of ASM International.

Favorite motto or quote?

“Perfection is the enemy of progress.” – Winston Churchill

Do you know someone who should be featured in an upcoming Women in Engineering profile? Contact Vicki Burt at [email protected].

ASM International names Sandy Robert, New Executive Director

MATERIALS PARK, Ohio (November 10, 2021) – Sandy Robert, CAE will join ASM International as Executive Director, effective January 1, 2022. Robert will be completing this year as Chief Executive Officer of the Association for Women in Science (AWIS), where she was hired in 2019 to turn around the association’s business model.

During her three-year tenure, she spearheaded membership growth and engagement, significantly increased monthly web traffic through digital marketing, and more than doubled year-end donations. She also partnered with the Board to guide AWIS to a competency-based board model.

She was previously Executive Director of Council of Engineering and Scientific Society Executives (CESSE) from 2013 through 2018, where she generated a 73-percent increase in revenue to the respected CESSE CEO meeting, redesigned the partnership program, and rebranded the organization’s signature annual meeting to ACCESSE. During Robert’s 25-plus-year career in association management, she has focused exclusively on leading Science Technology Engineering and Math (STEM) organizations.

“I am passionate about STEM professions as the drivers of discovery in our global economy and materials science and selection are core to innovation,” said Robert. “I’m very enthusiastic about the Board’s clear vision and the organization’s welcoming nature.”

She will succeed Ryan Milosh, Chief Sales and Marketing Officer, who is serving as Interim Managing Director, and will reassume his role as part of the transition. She is very eager to apply her skills and experience to helping advance ASM International as they enter ‘A decade of opportunity.’

Dr. Patrice Turchi Selected as the 2019 Recipient of the J. Willard Gibbs Phase Equilibria Award

ASM is pleased to announce that Dr. Patrice Turchi, Senior Scientist, Lawrence Livermore National Laboratory, Livermore, CA, is the 2019 J. Willard Gibbs Phase Equilibria Award recipient. His citation reads:

“For outstanding and pioneering contributions in the application of first-principles, quantum-mechanical calculations to the modeling of phase equilibria and thermodynamic behavior of alloys.”

The Gibbs Award was established in 2007 to recognize outstanding contributions to the field of phase equilibria. The award honors J. Willard Gibbs, one of America’s greatest theoretical scientists.  Originally proposed by the ASM Alloy Phase Diagram Committee, the award supports ASM’s strong brand identity and reputation in the field of phase diagrams. The J. Willard Gibbs Phase Equilibria Award is endowed by QuesTek Innovations LLC.

In addition to many other contributions, Gibbs laid the thermodynamics foundations of phase equilibria with his brilliant essay, “On the Equilibrium of Heterogeneous Substances”, published in 1876 and in 1878 in the Transactions of the Connecticut Academy.

New catalyst material achieves double the DOE fuel cell lifetime target

A UCLA-led team, including Professor Xiangfeng Duan and Dr. Bosi Peng, has developed an ultrafine platinum nanocatalyst embedded with cobalt oxide clusters, significantly enhancing fuel cell efficiency and durability by reducing platinum dissolution. This new catalyst, designed by UCLA materials scientists and chemists, nearly doubles the projected lifetime target set by the U.S. Department of Energy, potentially allowing light-duty vehicles to last beyond 15,000 hours of use, which is 87.5% longer than the department’s goal. This advancement could also benefit heavy-duty vehicles by slightly increasing the use of the embedded-oxide platinum catalyst, making fuel cells a more durable and efficient means of generating electricity with a limited carbon footprint.

Proton-exchange membrane fuel cells that directly convert chemical energy from hydrogen to electricity have been an attractive zero-emission power-generation technology. Inside the cells, the membrane is laced with a catalyst, such as a platinum alloy, which helps spark and speed up the otherwise sluggish chemical reaction that converts the energy stored in hydrogen atoms to electricity. The reaction breaks hydrogen atoms into their constituent protons and electrons, with water vapor being the reaction’s only emission byproduct. This is why adopting fuel-cell vehicles for widespread use offers an attractive option for meeting climate sustainability goals.

However, it has been difficult to find the sweet spot between achieving catalytic efficiency and fuel cell durability because the platinum dissolves over time, dropping the fuel cell’s performance.

“A major challenge in wider fuel cell adoption continues to be making their optimal performance last long enough to be commercially viable,” said Huang, who holds the Traugott and Dorothea Frederking Endowed Chair at UCLA Samueli. “Our research demonstrated an atomic interior scaffold that holds platinum atoms in place in the catalyst so they remain stable over an extended period of time.”

Rather than using a traditional platinum alloy, the researchers embedded clusters of cobalt-oxide molecules inside shells of platinum atoms. The design leverages the strong platinum-oxide interaction, which makes the catalyst more durable structurally and chemically without sacrificing fuel cell activity. The resulting hybrid structure helps the platinum ions stick and stay together despite extended use, reducing catalyst-replacement costs. In their experiments, the researchers saw this design outperformed traditional platinum-cobalt alloys in durability and longevity. The team also verified the nanoscale structure using a suite of microscopic, spectroscopic and simulation techniques.

For more information: Nature Catalysis

Research sheds light on universal mechanisms of work hardening

Scientists from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have, for the first time, observed the detailed mechanisms of work hardening, a process discovered by early blacksmiths in the Bronze and Iron Ages that strengthens metal through deformation. This research, conducted at the Harvard Materials Research Science and Engineering Center (MRSEC), enhances our understanding of material strength and could significantly impact material design and manufacturing, where work hardening is still widely used to strengthen various products, from car frames to power wires.

“Work hardening is used in many industrial deformation processes,” said Frans Spaepen, John C. and Helen F. Franklin Professor of Applied Physics at SEAS and senior author of the study. “Today, large-scale computer programs are used to model work hardening, but if you want to make those models as effective as possible, we need to know more about the underlying laws that govern that process. This work gives us a real-time window into the universal process of work hardening.”

It’s been impossible to observe work hardening in metals in real time because the atomic structures can only be observed through an electron microscope. Researchers can compare the structure before and after deformation but have had only a limited view of what happens during the process. Previous research has revealed that imperfections in the structure, known as dislocations, form a network of defects that cause the work hardening.

“What hasn’t been clear is the full complexity of the interactions between the defects in these atomic crystals that lead to hardening,” said Ilya Svetlizky, a former SEAS postdoctoral fellow with the MRSEC and co-first author of the paper.

To understand that critical part of the process, the research team turned to colloidal crystals—particles that are about 10,000 times larger than atoms and spontaneously form a crystal structure at high concentrations. These crystals mimic atomic systems because they have the same structures, undergo the same phase transitions, and possess the same types of defects. Colloidal crystals, however, are very soft—even 100,000 times softer than Jell-O.

The researchers grew these colloidal crystals composed of millions of particles and observed each particle using a confocal optical microscope. When they applied a strain to these crystals, they could measure the motion of each and every particle.

Surprisingly, these colloidal crystals experience significant work hardening—even more strongly than any other material. In fact, when the difference in particle size is taken into account, these ultra-soft materials become much stronger than most metals.

“We did not expect that hard-sphere colloidal crystals could work hardened,” said Seongsoo Kim, an MRSEC-supported graduate student of Spaepen and Weitz and co-first author of the paper. “The interactions between particles are too simple compared to normal metals. In fact, we found that these soft materials exhibit exceptionally pronounced work hardening, even more so than most metals like copper and aluminum.”

It is the first time that work hardening has been observed in colloidal crystals; it reveals that the process is governed primarily by the geometry of the particles and the defects. The crystals became stronger because of the dislocation defects and how they interact and entangle with one another.

These observations reveal the universal mechanisms of work hardening, which will also apply more generally to all materials, even those that cannot be studied with optical microscopes. These soft colloidal crystals exhibit such exceptionally large work hardening because they can contain a very high density of these defects.

“This research tells us something fundamental and universal about how materials get stronger. These are amazing materials: Even though they are very soft, work hardening makes them into the strongest materials known,” said David A. Weitz, Mallinckrodt Professor of Physics and of Applied Physics, and a co-author of the paper.

For more information: Nature

Image: Plastic shear deformation of colloidal single crystals.

Molecular simulations, supercomputing lead to energy-saving biomaterials breakthrough

A team of scientists at the Department of Energy’s Oak Ridge National Laboratory has developed a new method to process nanocellulose, a plant-based material, reducing energy needs by 21%. This method, discovered through molecular simulations and pilot testing, uses a solvent of sodium hydroxide and urea in water, significantly lowering production costs of nanocellulosic fiber, a strong, lightweight biomaterial ideal for 3D-printing sustainable structures. The findings, achieved in collaboration with the University of Tennessee and the University of Maine, support a circular bioeconomy by replacing petroleum-based resources with renewable, biodegradable materials, thus decarbonizing the economy and reducing waste.

The scientists pursued more efficient fibrillation, the process of separating cellulose into nanofibrils, traditionally an energy-intensive, high-pressure mechanical procedure occurring in an aqueous pulp suspension. The researchers tested eight candidate solvents to determine which would function as a better pretreatment for cellulose. They used computer models that mimic the behavior of atoms and molecules in the solvents and cellulose as they move and interact. The approach simulated about 0.6 million atoms, giving scientists an understanding of the complex process without the need for initial, time-consuming physical work in the lab.

The simulations developed by researchers with the UT-ORNL Center for Molecular Biophysics, or CMB, and the Chemical Sciences Division at ORNL were run on the Frontier exascale computing system — the world’s fastest supercomputer for open science. Frontier is part of the Oak Ridge Leadership Computing Facility, a DOE Office of Science user facility at ORNL.

“These simulations, looking at every single atom and the forces between them, provide detailed insight into not just whether a process works, but exactly why it works,” said project lead Jeremy Smith, director of the CMB and a UT-ORNL Governor’s Chair.

Once the best candidate was identified, the scientists followed up with pilot-scale experiments that confirmed the solvent pretreatment resulted in an energy savings of 21% compared to using water alone.

With the winning solvent, researchers estimated an electricity savings potential of about 777-kilowatt hours per metric ton of cellulose nanofibrils, or CNF, which is roughly the equivalent of the amount needed to power a house for a month. Testing of the resulting fibers at the Center for Nanophase Materials Science, a DOE Office of Science user facility at ORNL, and U-Maine found similar mechanical strength and other desirable characteristics compared with conventionally produced CNF.

“We targeted the separation and drying process since it is the most energy-intense stage in creating nanocellulosic fiber,” said Monojoy Goswami of ORNL’s Carbon and Composites group. “Using these molecular dynamics simulations and our high-performance computing at Frontier, we were able to accomplish quickly what might have taken us years in trial-and-error experiments.”

“When we combine our computational, materials science and manufacturing expertise and nanoscience tools at ORNL with the knowledge of forestry products at the University of Maine, we can take some of the guessing game out of science and develop more targeted solutions for experimentation,” said Soydan Ozcan, lead for the Sustainable Manufacturing Technologies group at ORNL.

The project is supported by both the DOE Office of Energy Efficiency and Renewable Energy’s Advanced Materials and Manufacturing Technologies Office, or AMMTO, and by the partnership of ORNL and U-Maine known as the Hub & Spoke Sustainable Materials & Manufacturing Alliance for Renewable Technologies Program, or SM2ART.

The SM2ART program focuses on developing an infrastructure-scale factory of the future, where sustainable, carbon-storing biomaterials are used to build everything from houses, ships and automobiles to clean energy infrastructure such as wind turbine components, Ozcan said.

“Creating strong, affordable, carbon-neutral materials for 3D printers gives us an edge to solve issues like the housing shortage,” Smith said.

It typically takes about six months to build a house using conventional methods. But with the right mix of materials and additive manufacturing, producing and assembling sustainable, modular housing components could take just a day or two, the scientists added.

The team continues to pursue additional pathways for more cost-effective nanocellulose production, including new drying processes. Follow-on research is expected to use simulations to also predict the best combination of nanocellulose and other polymers to create fiber-reinforced composites for advanced manufacturing systems such as the ones being developed and refined at DOE’s Manufacturing Demonstration Facility, or MDF, at ORNL. The MDF, supported by AMMTO, is a nationwide consortium of collaborators working with ORNL to innovate, inspire and catalyze the transformation of U.S. manufacturing.

For more information: PNAS

Image: ORNL scientists used molecular dynamics simulations, exascale computing, lab testing and analysis to accelerate the development of an energy-saving method to produce nanocellulosic fibers. This strong, lightweight, material is ideal for 3D-printing of sustainable housing, vehicles and clean energy components.

Scientists find new way to make efficient perovskite LEDs

A research team led by Tae-Woo Lee from Seoul National University’s Department of Materials Science and Engineering, in collaboration with Andrew M. Rappe from the University of Pennsylvania and Omer Yaffe from the Weizmann Institute of Science in Israel, has developed an ultra-high efficiency perovskite nanocrystal LED by strengthening the perovskite lattice and suppressing the material’s inherent low-frequency dynamics. Traditionally used in solar cells due to insufficient luminescence at room temperature, perovskites are composed of weak ionic bonds, and large-amplitude atomic displacements in their crystal lattices can cause dynamic disorder, which interferes with the radiative recombination process, leading to exciton dissociation and reduced luminescence efficiency.

Tae-Woo Lee recognized the potential of perovskite early on and secured several fundamental patents for perovskite light-emitting materials in 2014. Additionally, in 2015, his team published the first research paper demonstrating the enhancement of the efficiency in perovskite LED from 0.1 percent to 8.53 percent, comparable to the level of phosphorescent OLEDs.

In 2022, Lee’s team achieved an external quantum efficiency (EQE) of 28.9 percent (nearly theoretically achievable maximum), a peak brightness of 470,000 nits, and an operational lifetime of up to 30,000 hours. Moving towards commercialization, Lee’s startup company, SN Display, showed TV and tablet display prototypes at the CES (Consumer Electronics Show) in 2022 and 2023.

In this latest work, Lee and colleagues have focused on strategies to improve efficiency by reducing dynamic disorder using a novel mechanism that relies on conjugated molecular multipods (CMMs). When a CMM binds to the surface of the perovskite lattice, the lattice is strengthened, suppressing low-frequency dynamics and reducing dynamic disorder in the perovskite lattice. (Pictured above is a schematic diagram of the fabrication process).

The result is an ultra-high-efficiency LED with an EQE of 26.1 percent. This value is claimed to be among the highest efficiency in perovskite nanocrystal LEDs and is especially significant because the efficiency improvement was achieved by enhancing the intrinsic emission efficiency of the material itself rather than through engineering the device structure that enhances light outcoupling efficiency.

Lee commented: “This research presents a new material-based approach to overcoming the intrinsic limitations of perovskite light emitters. We anticipate that this will significantly contribute to the development of high-efficiency, long-lifetime perovskite light-emitting devices and the commercialization of next-generation displays.”

Rappe agreed, saying: “Together, we have shown the power of molecules in strengthening perovskites and making them better light emitters. By combining the powers of molecular chemistry, physics, mechanics, and optics, we are inventing new materials to lead us into a bright and energy-efficient future.”

For more information: Nature Communications

Image: Novel mechanism enhances luminescence efficiency by suppressing inherent low-frequency dynamics in the perovskite material.

Solar energy breakthrough could reduce need for solar farms

Scientists at Oxford University have developed a groundbreaking approach to generating solar electricity without silicon-based panels. Their innovation involves coating a new, ultra-thin, and flexible light-absorbing material onto everyday objects like rucksacks, cars, and mobile phones. This material uses a multi-junction technique to stack multiple light-absorbing layers into one solar cell, capturing a broader spectrum of light and generating more power from the same amount of sunlight.

This new material has been independently certified to achieve over 27% energy efficiency, matching the performance of traditional silicon photovoltaics for the first time. The certification from Japan’s National Institute of Advanced Industrial Science and Technology (AIST) precedes the publication of the researchers’ study later this year.

“During just five years experimenting with our stacking or multi-junction approach, we have raised power conversion efficiency from around 6% to over 27%, close to the limits of what single-layer photovoltaics can achieve today,” said Dr Shuaifeng Hu, Post Doctoral Fellow at Oxford University Physics. “We believe that, over time, this approach could enable the photovoltaic devices to achieve far greater efficiencies, exceeding 45%.”

This compares with around 22% energy efficiency from solar panels today (meaning they convert around 22% of the energy in sunlight), but the versatility of the new ultra-thin and flexible material is also key. At just over one micron thick, it is almost 150 times thinner than a silicon wafer. Unlike existing photovoltaics, generally applied to silicon panels, this can be applied to almost any surface.

‘By using new materials that can be applied as a coating, we’ve shown we can replicate and out-perform silicon while also gaining flexibility. This is important because it promises more solar power without the need for so many silicon-based panels or specially built solar farms,’ said Dr Junke Wang, Marie Skłodowska Curie Actions Postdoc Fellow at Oxford University Physics.

The researchers believe their approach will continue to reduce solar costs and make it the most sustainable form of renewable energy. Since 2010, the global average cost of solar electricity has fallen by almost 90%, making it almost a third cheaper than that generated from fossil fuels. Innovations promise additional cost savings as new materials, like thin-film perovskite, reduce the need for silicon panels and purpose-built solar farms.

The researchers are among 40 scientists working on photovoltaics led by Professor of Renewable Energy Henry Snaith at Oxford University Physics Department. Their pioneering work in photovoltaics and especially the use of thin-film perovskite began around a decade ago and benefits from a bespoke, robotic laboratory.

Their work has strong commercial potential and has already started to feed through into applications across the utilities, construction, and car manufacturing industries.

For more information: University of Oxford

Image: Dr Shuaifeng Hu, Post Doctoral Fellow at Oxford University Physics, examining the new thin-film perovskite material. Image credit: Martin Small.

Revolutionary gel could save homes from devastating wildfires

As climate change leads to hotter and drier conditions, fire seasons are becoming longer and wildfires more frequent and severe, devastating communities and economies. To address this growing threat, Stanford researchers have developed a water-enhancing gel that can be sprayed on homes and critical infrastructure to prevent them from burning during wildfires. This new gel lasts longer and is significantly more effective than existing commercial gels, providing extended protection even when applied well in advance of a fire, according to Eric Appel, associate professor of materials science and engineering.

Water-enhancing gels are made of super-absorbent polymers – similar to the absorbent powder found in disposable diapers. Mixed with water and sprayed on a building, they swell into a gelatinous substance that clings to the outside of the structure, creating a thick, wet shield. But the conditions near a wildfire are extremely dry – temperatures can be near 100 degrees, with high winds and zero percent humidity – and even water locked in a gel evaporates fairly quickly.

In the gel Appel and his colleagues designed, the water is just the first layer of protection. In addition to a cellulose-based polymer, the gel contains silica particles, which get left behind when the gels are subjected to heat.

“We have discovered a unique phenomenon where a soft, squishy hydrogel seamlessly transitions into a robust aerogel shield under heat, offering enhanced and long-lasting wildfire protection. This environmentally conscious breakthrough surpasses current commercial solutions, offering a superior and scalable defense against wildfires,” said the study’s lead author, Changxin “Lyla” Dong.

“When the water boils off, and all of the cellulose burns off, we’re left with the silica particles assembled into a foam,” Appel said. “That foam is highly insulative and ends up scattering all of the heat, completely protecting the substrate underneath it.”

The silica forms an aerogel – a solid, porous structure that is a particularly good insulator. Similar silica aerogels are used in space applications because they are extremely lightweight and can prevent most methods of heat transfer.

The researchers tested several formulations of their new gel by applying them to pieces of plywood and exposing them to direct flame from a gas hand torch, which burns at a considerably higher temperature than wildfire. Their most effective formulation lasted for more than 7 minutes before the board began to char. When they tested a commercially available water-enhancing gel in the same way, it protected the plywood for less than 90 seconds.

“Traditional gels don’t work once they dry out,” Appel said. “Our materials form this silica aerogel when exposed to fire that continues to protect the treated substrates after all the water has evaporated. These materials can be easily washed away once the fire is gone.”

The new gels build off of Appel’s previous wildfire prevention work. In 2019, Appel and his colleagues used these same gels as a vehicle to hold wildland fire retardants on vegetation for months at a time. The formulation was intended to help prevent ignition in wildfire-prone areas.

“We’ve been working with this platform for years now,” Appel said. “This new development was somewhat serendipitous – we were wondering how these gels would behave on their own, so we just smushed some on a piece of wood and exposed it to flames from a torch we had lying around the lab. What we observed was this super cool outcome where the gels puffed up into an aerogel foam.”

After that initial success, several years of additional engineering were needed to optimize the formulation. It is now stable in storage, easily sprayable with standard equipment, and adheres well to all kinds of surfaces. The gels are made of nontoxic components that have already been approved for use by the U.S. Forest Service, and the researchers conducted studies to show that they are easily broken down by soil microbes.

“They’re safe for both people and the environment,” Appel said. “There may need to be additional optimization, but my hope is that we can do pilot-scale application and evaluation of these gels so we can use them to help protect critical infrastructure when a fire comes through.”

For more information: Advanced Materials

Image: During a test on plywood, researchers showed how the new gel transitions from a hydrogel to an aerogel under heat from a gas hand torch. The torch burned at a much higher temperature than would result from a wildfire. Credit: Andrea d’Aquino