Scientists at the University of Tsukuba, Japan, developed an innovative imaging method that clearly visualizes nanoscale structures within rubber materials. The new method takes traditional electron microscopy of these materials to the next level.
Continue readingSpectroscopy technique used to study long-term aging in batteries
The U.S. Department of Energy’s (DOE) Argonne National Laboratory in Illinois announced the creation of an innovative set of methods to evaluate long-term aging in real-world battery cells. The methods their researchers developed and demonstrated are based on nuclear magnetic resonance (NMR) spectroscopy.
Continue readingA film capacitor that can take the heat
The Department of Energy’s Lawrence Berkeley National Laboratory and several collaborating institutions have successfully demonstrated a machine-learning technique to accelerate discovery of materials for film capacitors and used it to screen a library of nearly 50,000 chemical structures to identify and synthesize a compound with record-breaking performance.
Continue readingTailoring material properties with exquisite precision
Penn State researchers have discovered that “atomic spray painting” of potassium niobate can precisely manipulate a material’s properties by altering its atomic arrangement, potentially leading to environmentally friendly innovations in consumer electronics, medical devices, and quantum computing.
Continue readingGTP elastomer sockets for high-speed applications
Ironwood Electronics, Eagan, Minn., is now producing elastomer sockets which include a protective “P” layer that allows for more insertions by protecting the elastomer from erosion and debris build up, extending the life of the elastomers to 200,000 plus insertions.
Continue readingResearchers develop new semiconductor materials that change color
A team of scientists led by Associate Professor Nripan Mathews from NTU’s School of Materials Science and Engineering has successfully synthesized four groundbreaking types of perovskites, with Dr. Ayan Zhumekenov pioneering a unique method by incorporating dimethyl carbonate—a non-toxic solvent—into methylammonium-based perovskite crystals.
By examining the new crystal structures, the researchers found they could modify the band gap, which determines the material’s color and represents the energy needed for an electron to escape its bound state and achieve conductivity, by varying the proportions of methylammonium and dimethyl carbonate within the materials.
The capability to manipulate the width of the band gap is crucial for the diverse uses of perovskites. The newly developed 2D halide perovskites also demonstrate a dynamic “switchable” property.
The researchers discovered that one of the perovskites can alternate between two color states, transitioning from orange to red when subjected to a temperature of 80 degrees Celsius and returning to its initial color upon cooling back to room temperature.
The scientists showed that this color-changing reaction could be repeated for up to 25 cycles. This thermochromic switching phenomenon presents opportunities for applications such as smart coatings and heat-sensitive inks that alter color at varying temperatures.
The researchers are optimistic that their breakthrough will lead to technological advancements involving 2D halide perovskites in optoelectronics and other fields.
For more information: Journal of the American Chemical Society
Image: NTU’s novel perovskites. Credit: NTU.
Scientists grow stronger materials using cyanobacteria
Researchers have successfully grown bacterial cells within sand-based construction materials, marking a significant advance in biodesign, which combines biological and architectural innovations to create more sustainable building materials. By integrating living organisms into construction, this approach aims to transform how structures are designed and built. Cyanobacteria, known for their unique biological properties, have the potential to solidify inorganic materials like CO2, highlighting the immense value of incorporating living systems into industrial processes, particularly in the construction sector.
The process explored involves the biological deposition of bacteria – such as cyanobacterial calcium carbonate precipitation – and its integration with a robotic deposition, namely a sand-based biomixture, within an architectural biofabrication workflow.
After successfully growing two bacterial strains in potential sand-based construction materials, the researchers used microbiological protocols, such as optical density and fluorescence measurements, to follow bacterial growth and activity. This was done with the larger goal of harvesting light through photosynthesis and harnessing it to CO2 deposition and the sedimentation of calcium carbonate for strengthening sand-based construction components.
Ultimately, the researchers managed to outline a robotic deposition system for sand-based mixtures.
The paper was co-authored by researchers at the Technion Israel Institute of Technology, in Haifa, Israel, in the Faculty of Architecture and Town Planning and the Faculty of Biotechnology and Food Engineering.
For more information: Research Directions: Biotechnology Design
Image: Scientists are revolutionizing construction by incorporating cyanobacteria into sand-based materials. This biodesign approach enhances sustainability and structural strength while introducing eco-friendly innovations.
Nanostructures pave the way for advanced robotics
Researchers at the University of Sydney Nano Institute have made a significant advance in molecular robotics by developing custom-designed and programmable nanostructures using DNA origami, an innovative method that leverages the natural folding power of DNA to create new and useful biological structures. This approach has potential applications in targeted drug delivery systems, responsive materials, and energy-efficient optical signal processing. As a proof-of-concept, the researchers created over 50 nanoscale objects, including a “nano-dinosaur,” a “dancing robot,” and a mini-Australia that is 150 nanometers wide, a thousand times narrower than a human hair.
The research, led by first author Dr. Minh Tri Luu and research team leader Dr. Shelley Wickham, focuses on the creation of modular DNA origami “voxels” that can be assembled into complex three-dimensional structures. (Where a pixel is two-dimensional, a voxel is realized in 3D.)
These programmable nanostructures can be tailored for specific functions, allowing for rapid prototyping of diverse configurations. This flexibility is crucial for developing nanoscale robotic systems that can perform tasks in synthetic biology, nanomedicine and materials science.
Dr. Wickham, who holds a joint position with the Schools of Chemistry and Physics in the Faculty of Science, said, “The results are a bit like using Meccano, the children’s engineering toy, or building a chain-like cat’s cradle. But instead of macroscale metal or string, we use nanoscale biology to build robots with huge potential.”
Dr. Luu said, “We’ve created a new class of nanomaterials with adjustable properties, enabling diverse applications—from adaptive materials that change optical properties in response to the environment to autonomous nanorobots designed to seek out and destroy cancer cells.”
To assemble the voxels, the team incorporate additional DNA strands on to the exterior of the nanostructures, with the new strands acting as programmable binding sites.
Dr. Luu said, “These sites act like Velcro with different colors—designed so that only strands with matching ‘colors’ (in fact, complementary DNA sequences) can connect.”
He said this innovative approach allows precise control over how voxels bind to each other, enabling the creation of customizable, highly specific architectures.
One of the most exciting applications of this technology is its potential to create nanoscale robotic boxes capable of delivering drugs directly to targeted areas within the body.
By using DNA origami, researchers can design these nanobots to respond to specific biological signals, ensuring medications are released only when and where they are needed. This targeted approach could enhance the effectiveness of cancer treatments while minimizing side effects.
In addition to drug delivery, the researchers are exploring the development of new materials that can change properties in response to environmental stimuli. For instance, these materials could be engineered to be responsive to higher loads or alter their structural characteristics based on changes in temperature or acidic (pH) levels.
Such responsive materials have the potential to transform medical, computing and electronics industries.
For more information: Science Robotics
Image: Dr. Minh Luu aligning and focusing an image on the Sydney Microscopy and Microanalysis transmission electron microscope to view a DNA origami nanostructure. Credit: Stefanie Zingsheim/University of Sydney
Raith acquires Xnovo Technology
Raith, Denmark, a developer of maskless nanofabrication systems and characterization solutions, acquired Xnovo Technology ApS, a dynamic and innovative technology development company in Denmark specializing in advanced imaging methods and materials characterization.
Continue readingNanoink, printing technologies could enable electronics repairs, production in space
Researchers at Iowa State University, Ames, Iowa, have successfully demonstrated a groundbreaking zero-gravity 3D printing technology using electrohydrodynamic printing and nanoink, paving the way for on-demand manufacturing and electronics repair in space.
Continue readingTESCAN Group acquires EXpressLO LLC
TESCAN Group, a.s, Czech Republic, a leading global manufacturer of electron microscopes and advanced scientific instruments, has acquired EXpressLO LLC, Lehigh Acres, Fla., a provider of innovative FIB lift-out solutions for specimen preparation in STEM and other analytical techniques.
Continue readingSeco/Warwick to supply Jetcaster technology to Turkish aviation company
Seco/Warwick, Meadville, Pa, announced that it will deliver a JetCaster induction vacuum furnace to a Turkish aviation company. The advanced furnace is designed for producing castings using directional solidification, single crystal, and equiaxed structure methods, as well as gas-cooled crystallization. The technology addresses the precision and quality requirements of aviation component manufacturing.
The JetCaster VIM50 DS/SC/EQ furnace, with a maximum load capacity of 50 kilograms, supports various crystallization techniques, offering flexibility and high performance. Its innovative Engineered Gas Cooling (DGCC) system shortens processing times while maintaining superior product quality, making it particularly suited to the stringent demands of the aviation sector.
Seco/Warwick’s CEO, Sławomir Woźniak, highlighted the increasing demand for the company’s vacuum metallurgy solutions within the aviation industry, noting its critical role in producing components for both civil and military aircraft. He emphasized the company’s collaboration with leading corporations globally to meet the sector’s high-quality standards.
This marks the first order of a melting furnace from this specific partner. Seco/Warwick customized the furnace design to accommodate future modifications, such as the addition of feeders for bulk materials or briquettes, ensuring adaptability to evolving production needs. The solution aims to enhance the partner’s production efficiency and innovation, solidifying its contribution to the aviation industry.
Earthquake prediction techniques provide quick insight into material failure analysis
Researchers from the University of Illinois Urbana-Champaign, in collaboration with Sandia National Laboratories and Bucknell University, have found that insight from muscovite mica and earthquake statistics can help quantify how hostile environmental interactions impact the degradation of materials used in advanced solar panels, geological carbon sequestration, and infrastructure.
Continue readingFailure and collapse of the Arecibo Observatory telescope assessed by new report
A new report from the National Academies of Sciences, Engineering, and Medicine, Washington, D.C., analyzes the causes of the 2020 collapse of the National Science Foundation’s telescope at the Arecibo Observatory in Puerto Rico, where NSF maintained research operations for its National Astronomy and Ionosphere Center, and draws lessons learned for other unique, critical science facilities.
Continue readingThermo Fisher highlights use of advanced SEM for metal quality control analysis
Thermo Fisher Scientific, Waltham, Mass., has highlighted the ability of scanning electron microscopy to successfully capture defects when conducting failure analysis on metals.
Continue readingAirbus and Plastometrex partner on standardization of PIP
In a significant move to streamline mechanical testing and enhance material insights, Airbus, France, the global aerospace leader, is collaborating with Plastometrex, England, to support the standardization of profilometry-based indentation plastometry (PIP) – the innovative mechanical testing technique developed and commercialized by the Cambridge-based technology provider.
Continue readingAcquisition of BAE Systems Imaging Solutions, Inc. strengthening the opto-semiconductor segment and accelerating value-added growth
Photonics Management Corp., Bridgewater, N. J., a subsidiary of Hamamatsu Photonics K.K., Japan, has purchased the stock of BAE Systems Imaging Solutions, Inc. a subsidiary of BAE Systems, Inc., Falls Church, Va.
Continue readingNanoscale transistors could enable more efficient electronics
In order to overcome a fundamental limit of silicon semiconductor technology that prevents transistors from operating below a certain voltage, Massachusetts Institute of Technology researchers fabricated a different type of three-dimensional transistor using a unique set of ultrathin semiconductor materials.
Continue readingRelease of the Xtrology fully automated thin film inspection system
HORIBA STEC, Co., Ltd., Japan, released the fully automated thin film inspection system, Xtrology, that combines spectroscopic ellipsometry, Raman spectroscopy, and photoluminescence sensors making it possible to perform important inspections, such as film thickness measurement, defect analysis, and composition analysis of various wafers with a single instrument.
Continue readingLiteScope receives prestigious R&D 100 Award
NenoVision, Czech Republic, a leading innovator in advanced microscopy solutions, has been honored with the esteemed R&D 100 Award in the Analytical/Test category for its AFM-in-SEM LiteScope technology.
Continue readingScientists gain insight into the material defects that cause errors in quantum computing
A team of researchers at Ames National Laboratory, Ames, Iowa, has made significant progress in understanding how surface oxides, a primary cause of decoherence in quantum circuits, can improve the performance of quantum computing circuits.
Continue readingOne Minute Mentor : Phase Transformations in Numerical Simulation
Heat treatment of tool steels means several phase transformations. Every phase transformation must be described by start amount, end amount, and kinetics (change of phases depending on temperature and time). Start and end amount can be calculated with different thermodynamic software. For example, Thermocalc is well validated for tool steels. The most common method for determining the transformation kinetics of main phases (e.g. ferrite, austenite, martensite, bainite) is to use dilatometric investigations. TTT (time-temperature-transformation) diagrams obtained from dilatometer measurements can be easily implemented in HTS software. An example is shown in the figure.
For more information, click on the link below (subscription required). Then scroll to Figure 14. R Schneider; R. Mesquita; W Schützenhöfer, Distortion in Tool Steels, ASM International, 2014 https://doi.org/10.31399/asm.hb.v04d.a0005980
Ipsen supports Siemens AG with modernization of high-vacuum furnaces for energy infrastructure expansion
Ipsen, Cherry Valley, Ill., announced that it has successfully modernized its VHFC high-vacuum furnaces for Siemens AG, marking a significant milestone in their shared mission to enhance sustainability and efficiency in energy infrastructure. The project supports Siemens’ strategic efforts to expand medium and high-voltage grids globally, a key component of the energy transition and the broader push for electrification.
As part of this initiative, Ipsen is delivering three new VHFC-1000x1200x1000 (HV) high-vacuum brazing systems to Siemens’ production facilities in Goa, India, and Wuxi, China. The Goa facility will receive two systems, while the Wuxi facility will add one. All systems are manufactured in Germany and are critical to the production of vacuum interrupters, which are core components of switchgears used in power distribution networks.
These vacuum brazing systems play a pivotal role in enabling the switch from gas-insulated disconnectors to vacuum interrupters, effectively eliminating the use of fluorinated gases. This shift significantly reduces greenhouse gas emissions, aligning with global environmental protection goals.
Ipsen’s collaboration with Siemens reflects their joint commitment to supporting the expansion of renewable energy and sustainable energy infrastructure worldwide. The increased production capacity provided by these systems underscores the importance of advanced technology in achieving energy efficiency and reducing environmental impact.
HAI Romania enhances sustainable extrusion production with Nitrex system
Nitrex, Quebec, announced that it has implemented a new nitriding system at Hammerer Aluminium Industries (HAI) Romania, marking a significant step in advancing the sustainability of aluminum extrusion production. This installation aligns with HAI’s corporate commitment to environmental leadership and operational modernization.
HAI Romania, a subsidiary of Austria-based Hammerer Aluminium Industries, operates a state-of-the-art extrusion plant in Chișineu-Criș, near the Hungarian border. The facility features five extrusion presses, including a recently added 10-inch press, and serves key industries such as automotive, construction, and packaging, with strategic access to both Western and Eastern European markets.
The newly installed Nitrex NX-815 nitriding system replaces the traditional salt bath nitriding process. Unlike its predecessor, which generates environmentally challenging waste, the gas nitriding process offers a sustainable alternative. The system utilizes Nitreg® controlled nitriding and Nitreg®-C ferritic nitrocarburizing technologies, ensuring superior and consistent performance while minimizing environmental impact. With a 3,300-pound load capacity, the furnace is specifically designed for treating extrusion dies.
By adopting Nitreg® technologies, HAI Romania eliminates hazardous waste, reduces energy consumption, and enhances the durability of aluminum extrusion dies. This shift not only supports eco-friendly practices but also optimizes production efficiency by eliminating costly post-finishing operations, contributing to the company’s sustainability and operational goals.
Kanthal wins e-prize for industrial heating electrification
Kanthal, Amherst, NY, announced that it has been awarded the prestigious E-prize in the energy optimization category for its innovative technology supporting fossil-free industrial production. Organized by Sweden’s leading business newspaper Dagens Industri, Aktuell Hållbarhet, and the energy group E.ON, the E-prize recognizes groundbreaking advancements in energy innovation. This marks the 16th year the award has celebrated industry-leading solutions.
The jury highlighted Kanthal’s ability to combine a 90-year-old invention with modern innovation to replace natural gas with electric heating in high-temperature industrial processes. This transition enables fossil-free production, reducing emissions and improving working conditions. Kanthal was recognized as a global pioneer in sustainable industrial electrification, with applications ranging from steel production to manufacturing solar cells and batteries.
Robert Ståhl, president of Kanthal, noted the significance of the award, stating that the company’s technology allows industries such as steel, batteries, semiconductors, and glass to reduce emissions by transitioning to electricity for industrial heating. Nicolai Schaaf, sustainability manager at Kanthal, added that electrification not only reduces emissions but also supports the broader expansion of fossil-free energy management.
Kanthal’s technology, rooted in a 93-year-old innovation, is designed to electrify high-temperature processes across industries, eliminating CO2 emissions when powered by fossil-free electricity. These processes, integral to manufacturing sectors such as steel, aluminum, glass, and cement, account for a significant share of global industrial CO2 emissions, making Kanthal’s solutions critical for sustainable industrial transformation.
Read further here
Kymera expands Surface Technologies footprint in Europe, furthering customer access to advanced thermal spray solutions
Kymera International, Durham, N.C., strengthens position in thermal spray market and expands footprint in Europe with latest Surface Technologies acquisition of Coating Center Castrop GmbH., Germany.
Continue readingHours needed to mill forming tools? A thing of the past!
The Fraunhofer Institute for Laser Technology ILT, Germany, is pioneering a new approach in fuel cell production by using extreme high-speed laser material deposition to create wear-resistant functional metal layers on low-cost structural steel, replacing traditional milling methods and significantly reducing costs, construction time, and tool wear.
Continue readingSupersonic microprojectiles reveal new insights into metal bonding
Using a custom-built machine to launch microprojectiles at supersonic speeds, Cornell researchers, Ithaca, N.Y., have uncovered new details about how high-speed metallic collisions can form strong, durable atomic bonds, offering insights that could enhance 3D printing and other manufacturing techniques.
Continue readingGKN Hoeganaes to support First Phosphate in LFP cathode active material development
GKN Hoeganaes, a division of GKN Powder Metallurgy, England, and one of the largest iron powder producers globally, announced a strategic collaboration with First Phosphate, Canada, marking a significant step toward establishing a North American supply chain for lithium iron phosphate batteries, a critical component for the electric vehicle and energy storage industries.
Continue readingSpray Tips: Historical studies of suspension plasma spray methods
This overview presents 20 historical studies on suspension plasma spray methods, including research by Podlesak et al. that examines the effects of spray distance and plasma power level on the microstructure of suspension plasma-sprayed hydroxyapatite (HA).
Continue reading






























