A new approach to fine-tuning quantum materials

Quantum materials, which have electronic properties governed by quantum mechanics principles like correlation and entanglement, can display unique behaviors under certain conditions, such as superconductivity, where electricity is transmitted without resistance. To achieve optimal performance, these materials must be finely tuned. A team led by Mingda Li, an associate professor in MIT’s Department of Nuclear Science and Engineering (NSE), has developed an ultra-precise method to adjust the characteristics of quantum materials, using Weyl semimetals as an example.

This new technique isn’t limited to Weyl semimetals; according to NSE postdoc Manasi Mandal, one of the lead authors of the paper detailing the group’s findings, it can be applied to any inorganic bulk material and thin films as well. The experiment described in the paper focused on a specific type of Weyl semimetal, a tantalum phosphide (TaP) crystal.

Materials can be classified by their electrical properties: metals conduct electricity readily, whereas insulators impede the free flow of electrons. A semimetal lies somewhere in between. It can conduct electricity, but only in a narrow frequency band or channel. Weyl semimetals are part of a wider category of so-called topological materials that have certain distinctive features. For instance, they possess curious electronic structures — kinks or “singularities” called Weyl nodes, which are swirling patterns around a single point (configured in either a clockwise or counterclockwise direction) that resemble hair whorls or, more generally, vortices. The presence of Weyl nodes confers unusual, as well as useful, electrical properties. And a key advantage of topological materials is that their sought-after qualities can be preserved, or “topologically protected,” even when the material is disturbed.

“That’s a nice feature to have,” explains Abhijatmedhi Chotrattanapituk, a PhD student in MIT’s Department of Electrical Engineering and Computer Science and the other lead author of the paper. “When you try to fabricate this kind of material, you don’t have to be exact. You can tolerate some imperfections, some level of uncertainty, and the material will still behave as expected.”

The “tuning” that needs to happen relates primarily to the Fermi level, which is the highest energy level occupied by electrons in a given physical system or material. Mandal and Chotrattanapituk suggest the following analogy: Consider a dam that can be filled with varying levels of water. One can raise that level by adding water or lower it by removing water. In the same way, one can adjust the Fermi level of a given material simply by adding or subtracting electrons.

To fine-tune the Fermi level of the Weyl semimetal, Li’s team did something similar, but instead of adding actual electrons, they added negative hydrogen ions (each consisting of a proton and two electrons) to the sample. The process of introducing a foreign particle, or defect, into the TaP crystal — in this case by substituting a hydrogen ion for a tantalum atom — is called doping. And when optimal doping is achieved, the Fermi level will coincide with the energy level of the Weyl nodes. That’s when the material’s desired quantum properties will be most fully realized.

For Weyl semimetals, the Fermi level is especially sensitive to doping. Unless that level is set close to the Weyl nodes, the material’s properties can diverge significantly from the ideal. The reason for this extreme sensitivity owes to the peculiar geometry of the Weyl node. If one were to think of the Fermi level as the water level in a reservoir, the reservoir in a Weyl semimetal is not shaped like a cylinder; it’s shaped like an hourglass, and the Weyl node is located at the narrowest point, or neck, of that hourglass. Adding too much or too little water would miss the neck entirely, just as adding too many or too few electrons to the semimetal would miss the node altogether.

To reach the necessary precision, the researchers utilized MIT’s two-stage “Tandem” ion accelerator — located at the Center for Science and Technology with Accelerators and Radiation (CSTAR) — and buffeted the TaP sample with high-energy ions coming out of the powerful (1.7 million volt) accelerator beam. Hydrogen ions were chosen for this purpose because they are the smallest negative ions available and thus alter the material less than a much larger dopant would. “The use of advanced accelerator techniques allows for greater precision than was ever before possible, setting the Fermi level to milli-electron volt [thousandths of an electron volt] accuracy,” says Kevin Woller, the principal research scientist who leads the CSTAR lab. “Additionally, high-energy beams allow for the doping of bulk crystals beyond the limitations of thin films only a few tens of nanometers thick.”

The procedure, in other words, involves bombarding the sample with hydrogen ions until a sufficient number of electrons are taken in to make the Fermi level just right. The question is: how long do you run the accelerator, and how do you know when enough is enough? The point being that you want to tune the material until the Fermi level is neither too low nor too high.

To streamline the protocol, the team has devised a theoretical model that first predicts how many electrons are needed to increase the Fermi level to the preferred level and translates that to the number of negative hydrogen ions that must be added to the sample. The model can then tell them how long the sample ought to be kept in the accelerator chamber.

The good news, Chotrattanapituk says, is that their simple model agrees within a factor of 2 with trusted conventional models that are much more computationally intensive and may require access to a supercomputer. The group’s main contributions are two-fold, he notes: offering a new, accelerator-based technique for precision doping and providing a theoretical model that can guide the experiment, telling researchers how much hydrogen should be added to the sample depending on the energy of the ion beam, the exposure time, and the size and thickness of the sample.

This could pave the way to a major practical advance, Mandal notes, because their approach can potentially bring the Fermi level of a sample to the requisite value in a matter of minutes — a task that, by conventional methods, has sometimes taken weeks without ever reaching the required degree of milli-eV precision.

For more information: Applied Physics Review

Image: Ion implantation using a tandem accelerator on bulk material. Selected ion species are injected toward the terminal, and ions with specific energies are directed toward the sample. Credits: Ella Maru Studio

Pinpointing why promising cathodes fail

Researchers at the US Department of Energy’s Argonne National Laboratory have discovered why and how one of the more promising cathode materials in lithium ion batteries – single crystalline nickel-rich lithium nickel manganese cobalt oxide – degrades with use.

Continue reading

Argonne Lab’s ‘AI-NERD’ predicts material behavior with unprecedented accuracy

Imagine scientific breakthroughs happening without a scientist running every experiment; a new AI development at Argonne National Laboratory, AI-NERD (Artificial Intelligence for Non-Equilibrium Relaxation Dynamics), takes a concrete step toward this vision, marking a significant advancement in autonomous materials discovery. The field of material science faces a challenge as the demand for new, better-performing materials in areas like renewable energy and aerospace outpaces researchers’ ability to discover and characterize them using traditional methods. Traditionally, understanding how materials change at the atomic level has relied on slow, labor-intensive experiments, and observing such microscopic dynamics is challenging. Techniques like X-ray photon correlation spectroscopy (XPCS) offer insights into atomic behavior, but the data generated are incredibly complex. AI-NERD promises to accelerate materials research by addressing these challenges.

This approach leverages unsupervised deep learning, specifically an autoencoder neural network, to analyze complex X-ray data and unveil the hidden “fingerprints” of material behavior. By teaching itself to recognize patterns in XPCS data without expert training, AI-NERD creates condensed material “fingerprints” from intricate X-ray scattering patterns. This breakthrough enables researchers to map and analyze material behavior in previously impossible ways.

“The goal of the AI is just to treat the scattering patterns as regular images or pictures and digest them to figure out what are the repeating patterns. The AI is a pattern recognition expert,” said James (Jay) Horwath Argonne National Laboratory, the first author of the study.

These fingerprints are more than just patterns—they are condensed representations of a material’s structure and behavior, distilling volumes of  of XPCS data into essential features. As Horwath explained, “You can think of it like having the material’s genome, it has all the information necessary to reconstruct the entire picture.”

What sets AI-NERD apart is its ability to learn and identify patterns without expert guidance. This unsupervised learning approach allows the system to discover hidden relationships and trends in material behavior that might elude scientists. By processing and categorizing X-ray scattering images, AI-NERD creates a comprehensive map of material dynamics, offering researchers a new lens for viewing atoms and molecules.

In the research, the scientists used a technique called Uniform Manifold Approximation and Projection (UMAP) to transform their complex dataset into a simple two-dimensional picture, as shown in the visual above. UMAP is similar to another popular method called t-distributed Stochastic Neighbor Embedding (tSNE). Both of these methods try to preserve the relationships between data points when reducing dimensions. For a brief overview of word embeddings, check out the article “What embeddings are and how to explore them in R&D.”

This development in AI-assisted materials research at Argonne National Laboratory is part of a broader trend of artificial intelligence revolutionizing materials science. In recent years, several notable advancements have paved the way for AI-NERD’s development.

In 2023, researchers made significant strides in using AI for materials synthesis and characterization. For instance, one team developed an AI system capable of extracting “recipes” for producing materials from scientific papers. This system could identify correlations between precursor chemicals and resulting crystal structures, streamlining the material discovery process.

Another group created an AI system that recognizes patterns across different materials recipes. This innovation allows the AI to suggest alternative recipes for known materials, potentially opening up new avenues for synthesis.

While machine learning continues to be something of a trending subject, its use in material science is not new. In 2018, researchers at Virginia Tech developed a machine learning framework that trains “on the fly” to accelerate the development of computational models for materials design.

Similarly, AI system called ARTIST from Aalto University and the Technical University of Denmark debuted in 2019 to instantly determine how a molecule will react to light, potentially accelerating the development of flexible electronics and other technologies.

In nuclear materials research, University of Wisconsin-Madison and Oak Ridge National Laboratory unveiled an AI system was trained to detect and analyze microscopic radiation damage in potential nuclear reactor materials in 2018. It outperformed human experts in both accuracy and speed.

In particular, the development of AI-NERD promises to boost the analysis of XPCS data in particular. As the upgraded Advanced Photon Source comes online, generating 500 times brighter X-ray beams than its predecessor, the need for efficient data processing becomes even more critical. “The data we get from the upgraded APS will need the power of AI to sort through it,” Horwath emphasizes. AI-NERD’s ability to create material “fingerprints” and identify patterns in large datasets could advance researchers’ understanding of material dynamics for an array range of applications.

For more information: Nature Communications

Image: The AI-NERD model learns to produce a unique ‘fingerprint’ for each sample of XPCS data enabling the identification of trends and repeating patterns. 

Researchers develop first voxel building blocks for 3D-printed organs

A research team at the University of Virginia School of Engineering and Applied Science, led by Assistant Professor Liheng Cai and his Ph.D. student Jinchang Zhu, has developed biomaterials with controlled mechanical properties that match various human tissues, potentially serving as the first building blocks for human-compatible organs printed on demand. Zhu highlighted this advancement as a significant leap compared to existing bioprinting technologies.

Their unique bioprinting method is called digital assembly of spherical particles. The DASP technique deposits particles of biomaterial in a supporting matrix, both of which are water-based, to build 3D structures that provide a suitable environment for the cells to grow. The assembly process is how “voxels,” the 3D version of pixels, construct 3D objects.

“Our new hydrogel particles represent the first functional voxel we have ever made,” Zhu said. “With precise control over mechanical properties, this voxel may serve as one of the basic building blocks for our future printing constructs.

“For example, with this level of control, we could print organoids, which are 3D cell-based models that function as human tissue, to study disease progression in the search for cures.”

The particles are polymer hydrogels engineered to mimic human tissue by tweaking the arrangement and chemical bonds of single-molecule monomers, which link together in chains to form networks.

Encapsuled within the particles are actual human cells.

Compared to other hydrogel bio-inks, Cai and Zhu’s are less toxic and more biocompatible for cells, they said. Their “double network” hydrogels—formed from two intertwined molecular networks—are mechanically strong, but highly tunable for mimicking the physical characteristics of human tissue.

Cai and Zhu first described their DASP technology in 2021. That work proved the concept of using biomaterial voxels as building blocks and, through lab experiments, demonstrated a DASP-printed material that functioned like a pancreas with glucose-stimulated insulin release.

But DASP 1.0 could only print brittle hydrogels with limited tunability. In their latest paper in Nature Communications, Cai and Zhu present DASP 2.0, which introduces the double-network hydrogel bio-inks formed using a “click chemistry” to rapidly cross-link, or bond, the molecular structures.

Part of what enabled this advancement was improvements to the team’s bioprinter. They designed a multichannel nozzle to mix the hydrogel components on demand. Premixing isn’t possible because the cross-linking occurs so fast, going from liquid droplets to an elastic water-swollen gel within 60 seconds.

In previous studies, the team determined that drop formation and rapid detachment from the nozzle are essential to mimic the mechanical properties—such as elasticity or stiffness—of the target human tissue.

DASP achieves this by depositing large droplets from a narrow and fast-moving nozzle into the matrix, immediately suspending them.

“We’ve now laid the foundation for voxelated bioprinting,” Cai said. “When fully realized, DASP’s applications will include artificial organ transplant, disease and tissue modeling, and screening candidates for new drugs. And it probably won’t stop there.”

For more information: Nature Communications

Image: Reminiscent of a raspberry, this voxelated hollow sphere made of a single layer of droplets was generated using digital assembly of spherical particles, or DASP, a 3D bioprinting process developed in assistant professor of materials science and engineering Liheng Cai’s lab. (Soft Biomatter Lab, UVA Engineering). Credit: University of Virginia School of Engineering and Applied Science/Liheng Cai

Single-crystal cathodes for faster-charging, longer-lasting EVs

A team at Pohang University of Science and Technology has unveiled a groundbreaking single-crystal synthesis technique. This innovation significantly boosts the resilience of cathode materials, a key component in electric vehicle batteries.

Professor Kyu-Young Park from the Graduate Institute of Ferrous & Eco Materials Technology and the Department of Materials Science and Engineering, along with PhD candidate Kyoung Eun Lee and alumna Yura Kim from the same institute at Pohang University of Science and Technology (POSTECH), collaborated with the POSCO Holdings N.EX.T Hub.

Lithium (Li) secondary batteries, widely employed in electric vehicles, function by converting electrical energy into chemical energy during charging and reversing the process to release electrical energy during discharge. This process involves the movement of Li+ ions between a cathode and an anode.

The cathode materials in these batteries typically include nickel (Ni) due to their high lithium-ion storage capacity. However, traditional nickel-based materials exhibit a polycrystalline structure composed of numerous small crystals. This structure is prone to structural degradation during charge and discharge cycles, leading to a considerable reduction in battery lifespan.

To tackle this issue, one proposed solution involves producing the cathode material in a “single-crystal” form. This approach aims to enhance the structural, chemical stability, and durability of nickel-based cathode materials by synthesizing them into large, single particles or “single crystals.”

Single-crystal materials are typically synthesized at high temperatures, where they undergo a process of becoming rigid. However, the precise mechanisms of this hardening process during synthesis and the specific conditions under which it occurs are still not fully understood.

To enhance the durability of nickel cathode materials for electric vehicles, the researchers concentrated on identifying a critical temperature threshold conducive to synthesizing high-quality single-crystal materials. They conducted experiments across different synthesis temperatures to pinpoint the optimal conditions for producing single crystals in the synthesis of a specific nickel-based cathode material (N884). The team systematically evaluated how varying temperatures affected the material’s capacity and long-term performance.

The researchers found that conventional polycrystalline materials synthesized below a specific critical temperature degrade over time when used in secondary batteries. In contrast, synthesizing these materials above this critical temperature enables the production of high-quality single crystals through a process known as “densification.”

During densification, the internal grain size of the material increases, and empty spaces within the structure are densely filled. This transformation results in single crystals that are exceptionally hard and resistant to degradation over prolonged periods, significantly enhancing their durability.

Based on these insights, the team confirmed that synthesizing single crystals above the critical temperature represents a more advantageous strategy for material design. They also proposed an effective method for synthesizing high-quality single crystal materials.

For more information: POSTECH

Into another dimension: Nanoscale trilayer exhibits ultrafast charge transfer in semiconductor materials

Advancements in optoelectronic semiconductor technology are heavily reliant on the controlled movement of charges and excitons—pairs of electrons and holes—towards specific directions to generate fuel or electricity. Mirroring the mechanism of photosynthesis, where pigments capture solar energy and funnel it to a reaction center for conversion and utilization, photons in this process create electron-hole pairs. These pairs must be parted to kick-start chemical reactions.

Deriving inspiration from the natural process of photosynthesis, National Renewable Energy Laboratory (NREL) researchers developed a mixed-dimensionality (2D/1D/2D) trilayer of semiconductors to enable exciton dissociation. This exciton dissociation step, a splitting and spatial separation of excited electron–hole pairs, is a microscopic process that is fundamental to the performance of photovoltaic systems.

As the clean energy transition progresses, advances in photovoltaic systems, which convert sunlight into electricity, are crucial. Photovoltaics rely on the light-activated creation of separated electron-hole pairs to drive an external circuit.

“In this study, we were able to create light-activated electron hole pairs and separate them for a long time, longer than previously reported similar systems,” said NREL’s Alexis Myers, a graduate student researcher.

The diverse and tunable electronic and optical properties of quantum-confined low-dimensional materials such as two-dimensional (2D) transition metal dichalcogenides (TMDCs) and one-dimensional (1D) single-walled carbon nanotubes (SWCNTs) make them prime candidates for fundamental studies on charge and exciton transfer. These types of materials have enhanced electron-hole Coulomb interactions, where the electrostatic force causes the attraction between an electron and an electron hole to form an exciton. To separate the charges, researchers must overcome the attraction, made more difficult by the large binding energies.

These materials exhibit large exciton binding energies—the energy needed for exciton dissociation—which can inhibit generation of electrical currents for photovoltaics, photodetectors, and sensors or chemical bonds in solar fuel schemes. So, NREL researchers sought to develop a hetero-trilayer that would address this challenge.

“Extending charge separation lifetimes is necessary to increase the chance of charge extraction,” Myers said. “The creation of bilayers and trilayers comes from this desire to increase the distance between separated charges. However, it’s unclear in the literature whether the ‘separated’ charges are still electrostatically bound across the interface. So, though separated, the Coulomb interaction is still present, which can decrease charge separation lifetimes. In the trilayer, we were able to track the movements of electrons and holes sequentially through each layer, confirming they are indeed no longer bound to each other.”

Complex, low-dimensional heterostructures—like TMDCs—exhibit longer lifetimes, initiating important photochemical reactions, which are critical to generating electricity in photovoltaics. Alexis Myers and team developed a mixed-dimensionality hetero-trilayer of SWCNTs between two semiconductors that enables a photoinduced charge transfer cascade where electrons (negative charge carriers) move in one direction while holes (positive charge carriers) move in the other direction.

The hetero-trilayer mimics the natural charge transfer cascade observed in plant photosynthesis, which inspired its development. A key part of the heterostructure is the one-dimensional middle layer, which helps the charge carriers diffuse efficiently from one 2D layer to the other.

The study also looked at the mechanics of carrier diffusion in TMDCs. Using transient absorption spectroscopy, researchers tracked exciton dissociation and charge diffusion across the hetero-trilayer, observing ultrafast electron transfer to one layer and hole transfer to the another. The trilayer architecture appears to facilitate ultrafast hole transfer and exciton dissociation, resulting in a long-lived charge separation.

The charge transfer cascade enables an excited state—where electrons and holes reside in separate places within the trilayer—where photochemical reactions could be initiated. Longer charge separation lifetimes could mean greater electric current generation because more electrons and holes have not recombined.

The trilayer produced double the carrier yield compared with a 2D/1D bilayer. It also empowered the separated charges to overcome the interlayer exciton binding energies of unbound separated charges, a key challenge with such materials.

“These materials have high electrostatic interaction between the electron and hole, yet we have shown that we can successfully separate them through efficient diffusion along the SWCNT mesh,” said NREL’s Alejandra Hermosilla Palacios, a materials science postdoctoral researcher. “Kinetic analysis of the different steps is necessary to understand the efficiency in these systems. We have mostly focused on the diffusion of charges thanks to the SWCNTs. We would like to understand how charges diffuse or move in the TMDC layer to better propose new systems that could lead to higher efficiencies—more electrons and holes generated—and even longer-lived charges (chance for higher electric current generation).”

In previous charge transfer cascades, the mechanism for charge transfer is unclear or does not proceed as expected.

“Our results suggest that well-defined charge transfer cascades can result in longer charge separated lifetimes and higher charge yield (or efficient transfer), paving the way for better understanding of how charges are moving through these systems and how we can continue to optimize them,” Myers said.

“Our results show promising implications for the development of nanoscale optoelectronic devices like solar cells and solar fuel architectures,” Hermosilla Palacios said. “Mixed-dimensionality heterostructures demonstrate photophysics and technological advantages that may enhance and accelerate innovation in optoelectronics.”

For more information: ACS Nano

Image: Charge movement in a mixed-dimensionality hetero-trilayer material: Photoexcited electrons and holes travel from the transition metal dichalcogenide layer (top) through single-walled carbon nanotubes (middle), resulting in a long charge recombination lifetime of 1.2 microseconds, which has potential applications in optoelectronics and energy harvesting. Image by Alexis Myers, NREL.

A Dune-inspired spacesuit turns astronaut pee into drinking water

In the iconic sci-fi saga Dune, the inhabitants of the parched world of Arrakis don unique garments known as stillsuits to reclaim their body’s water. Drawing inspiration from this concept, engineers have developed an innovative prototype spacesuit that transforms astronauts’ urine into potable water.

Presently, astronauts don a maximum absorbency garment, akin to a sophisticated diaper with layers of super-absorbent polymers, to manage bodily waste while in their spacesuits. This solution, however, has been criticized for discomfort, leakage, and the potential to cause urinary tract infections.

“I’ve been a fan of the Dune series for as long as I can remember,” says Sofia Etlin, a space medicine and policy researcher at Cornell University. “Building a real life stillsuit was always a bit of a dream.”

Current spacesuit designs also incorporate an in-suit drinking bag, or IDB, that carries less than a liter of water. Astronauts can sometimes go for eight- to 12-hour spacewalks, which often includes enormous amounts of physical exertion, Etlin says. NASA’s future Artemis missions on the moon will probably see explorers spending at least as much time or longer on the lunar surface, though current plans have them carrying IDBs of the same size, she says.

Etlin and her colleagues designed and built a new type of undergarment with a collection cup that goes over an astronaut’s private parts. Urine is routed into a filtration system that first removes salty water from the urine and then uses a pump to take the salt out from that water. The filtered water is enriched with electrolytes and then sent into the IDB.

A fictional Fremen’s stillsuit is powered by body movement, but astronauts will have to carry a 20.5-volt battery as part of this new design. The total system, including pumps, sensors and display screen, weighs around 8 kilograms and can purify half a liter of water in five minutes.

Sweat — which fictional stillsuits also collect — would be easier to filter than urine, Etlin says. But she and her colleagues decided to focus on a single waste product for their first prototype. “One step at a time,” she says.

The team hopes to further test its system during simulated moon and Mars missions here on Earth and eventually during real spacewalks.

It “would be amazing for us,” says Julio Rezende of the Federal University of Rio Grande do Norte in Natal, Brazil, who leads Habitat Marte, a Mars analog mission in Brazil. “I believe this technology would bring a lot of benefits.”

Rezende sees potential terrestrial spin-offs, too, such as a similar system that could be used for firefighters combating forest fires or hikers on long trails.

For more information: Frontiers in Space Technology

Image: The new spacesuit design (illustrated) that collects urine and recycles it into drinking water weighs around 8 kilograms and can purify half a liter of water in five minutes. FREMAN SPACE TEAM (ILLUSTRATION), NASA

New technique enables ultrafast imaging of light-matter interactions

Scientists at the SLAC National Accelerator Laboratory, part of the Department of Energy, have uncovered novel properties in an ultrathin material that could revolutionize the way we handle light. This breakthrough is anticipated to benefit optoelectronic devices—those that sense, modulate, or produce light—as well as advance our understanding of light polarization within substances.

These insights emerged during sessions with the laboratory’s rapid “electron camera.” A wide array of common applications, including medical imaging systems, fiber optics, and light-emitting diodes (LEDs), rely on the capabilities of optoelectronic devices.

Images of the electrons in the investigation that displayed a circular pattern rather than a straight line indicated circular polarization.

The substance was so thin, just 50 nm thick.

Scientists are eager to use these incredibly thin materials, sometimes referred to as two-dimensional (2D) materials, to reduce the size and increase the functionality of optoelectronic devices. According to Lindenberg, they see themselves building devices out of layers of 2D structures, much like Legos.

A distinct material would make up each 2D structure, which would be perfectly aligned to provide a particular kind of optical response. These many shapes and functionalities can be combined to create small devices with potential uses, such as optoelectronic devices or medical imaging.

For more information: SLAC National Accelerator Laboratory

Image: Snapshot taken by SLAC’s high-speed electron camera, an instrument for ultrafast electron diffraction (MeV-UED), showing evidence of circular polarization of terahertz light by an ultrathin sample of tungsten ditelluride. Image Credit: Sie et al., Nano Letters

 

Scientists simulate magnetization reversal of Nd-Fe-B magnets using large-scale finite element models

NIMS simulated magnetization reversal in Nd-Fe-B magnets using large-scale finite element models based on electron microscopy data. These simulations revealed microstructural features affecting coercivity, guiding the development of high-performance permanent magnets

Green power generation, electric transportation, and other high-tech industries rely heavily on high-performance permanent magnets, among which the Nd-Fe-B magnets are the strongest and most in demand. The coercivity of industrial Nd-Fe-B magnets is far below its physical limit up to now. To resolve this issue, micromagnetic simulations on realistic models of the magnets can be employed.

A new approach to reconstruct the real microstructure of ultrafine-grained Nd-Fe-B magnets in large-scale models is proposed. Specifically, the tomographic data from a series of 2D images obtained by scanning electron microscopy (SEM) in combination with consistent focused ion beam (FIB) polishing can be converted into a high-quality 3D finite element model.

This tomography-based approach is universal and can be applied to other polycrystalline materials addressing a wide range of materials science problems.

Micromagnetic simulations on the tomography-based models reproduced the coercivity of ultrafine-grained Nd-Fe-B magnets and explained its mechanism. The microstructural features relevant to the coercivity and nucleation of magnetization reversal were revealed.

Thus, the developed model can be considered as a digital twin of Nd-Fe-B magnets—a virtual representation of an object designed to reflect its physics accurately.

The proposed digital twins of the Nd-Fe-B magnets are precise enough to reproduce both the microstructure and magnetic properties that can be implemented for the inverse problem in designing on-demand high-performance permanent magnets.

For instance, when researchers input the magnetic properties required for a specific application (e.g., traction or variable magnetic force motor), a data-driven research pipeline with integrated digital twins will be able to propose the optimal composition, processing conditions, and microstructure of the magnet for that application, significantly reducing development time.

For more information: Computational Materials

Image: Development of a tomography-based model. a Acquisition of a series of FIB-SEM images for a hot-deformed Nd-Fe-B magnet. b Processing of the images including 2D segmentation and the conversion of grain slices into point clouds. c Generation of close-packed 3D convex grains isolated from each other by the intergranular phase. Triple junctions are made invisible except for a zoomed region showing the mesh around one of them. Credit: npj Computational Materials (2024)

Scientists develop the next generation of highly efficient memory materials with atom-level control

Similar to the butterfly effect, tiny adjustments can yield significant outcomes. Researchers at Pohang University of Science and Technology (POSTECH) achieved a breakthrough by modifying a material called ‘spin-orbit torque (SOT).’ This material is now a key focus in next-generation DRAM memory.

This research team, led by Professor Daesu Lee and Yongjoo Jo, a Ph.D. candidate, from the Department of Physics and Professor Si-Young Choi from the Department of Materials Science and Engineering at POSTECH, achieved highly efficient field-free SOT magnetization switching through atom-level control of composite oxides.

SOT arises from the interaction between the spin (magnetic property) and motion (electrical property) of electrons. This phenomenon controls the magnetic state through the movement of spin when current flows. By utilizing magnetic information instead of electrical information, memory power consumption is reduced, making it advantageous for non-volatile memory which retains information even when powered off.

Researchers have been actively exploring various materials including semiconductors and metals for these applications. Particularly, there is significant interest in discovering materials that exhibit both magnetism and the “spin-Hall effect.”

The study of efficient magnetization switching via SOTs has garnered much attention. However, a challenge remains: opposite spin currents generated within a single layer tend to cancel each other out.

In this study, Professors Daesu Lee and Si-Young Choi from POSTECH addressed the problem by systematically modifying the material’s seemingly insignificant structure. Strontium ruthenate (SrRuO3), a complex oxide known for exhibiting both magnetism and spin-Hall effects, has been widely used in SOT research.

The team synthesized SrRuO3 with asymmetric spin-Hall effects on the top and bottom surface layers by minutely adjusting the atomic lattice structure of these layers. By creating an imbalance in the spin-Hall effect with a strategically designed asymmetric surface structure, they were able to control the magnetization in a specific direction.

Building on this approach, the team successfully achieved efficient magnetization switching without the need for a magnetic field. By incorporating SOT into a device based on SrRuO3, they could reorient the magnetic domain using only an electric current to write and read data.

The resulting memory device demonstrated the highest efficiency (2 to 130 times greater) and lowest power consumption (2 to 30 times lower) compared to any known single-layer, field-free system to date. This magnetization switching was accomplished without a magnetic field while preserving the conventional properties of SrRuO3 used in previous studies.

Professor Daesu Lee of POSTECH says, “The asymmetric SrRuO3 synthesized by the team is a crucial platform for studying the interaction between ferromagnetism and the spin-Hall effect.” He added, “We look forward to further research to uncover new SOT mechanisms and develop highly efficient, room-temperature, single-phase SOT materials.”

For more information: Nano Letters

Image: Atomic structure of asymmetric SrRuO3 thin films and spin-orbit torque magnetization switching results controlled at the atomic layer level. Credit: POSTECH

Tin toughens bioimplant titanium alloys through cocktail effect

Beta (β)-type titanium (Ti) alloys are renowned for their strength, formability, and resistance to harsh environments, making them ideal for implants and prosthetics. However, under certain conditions, a brittle omega phase can form, making the material prone to breaking. While it is known that adding tin (Sn) negates this, and makes β-type Ti alloys stronger, the exact mechanics behind this continued to puzzle scientists. That is until researchers recently discovered a metallurgical cocktail effect to explain it.

Continue reading

Nanosized blocks spontaneously assemble in water to create tiny floating checkerboards

The scientific community has successfully engineered nanosized cubes that exhibit the remarkable ability to spontaneously form a two-dimensional checkerboard pattern when placed on the surface of water. This innovative research introduces a simple and efficient approach to creating complex nanostructures through the application of a technique known as self-assembly.

“It’s a cool way to get materials to build themselves,” said study co-senior author Andrea Tao, a professor in the Aiiso Yufeng Li Family Department of Chemical and Nano Engineering at the University of California San Diego. “You don’t have to go into a nanofabrication lab and do all these complex and precise manipulations.”

Each nanocube is composed of a silver crystal with a mixture of hydrophobic (oily) and hydrophilic (water-loving) molecules attached to the surface. When a suspension of these nanocubes is introduced to a water surface, they arrange themselves such that they touch at their corner edges. This arrangement creates an alternating pattern of solid cubes and empty spaces, resulting in a checkerboard pattern.

The self-assembly process is driven by the surface chemistry of the nanocubes. A high density of hydrophobic molecules on the surface brings the cubes together to minimize their interaction with water. Meanwhile, the long chains of hydrophilic molecules cause enough repulsion to create voids between the cubes, creating the checkerboard pattern.

To fabricate the structure, researchers applied drops of the nanocube suspension onto a petri dish containing water. The resulting checkerboard can be easily transferred to a substrate by dipping the substrate into the water and slowly withdrawing it, allowing the nanostructure to coat it.

This study stems from a collaborative effort between multiple research groups that are part of the UC San Diego Materials Research Science and Engineering Center (MRSEC). The work featured a synergistic combination of computational and experimental techniques. “We’ve built a continuous feedback loop between our computations and experiments,” said Tao. “We used computer simulations to help us design the materials at the nanoscale and predict how they will behave. We also used our experimental results in the lab to validate the simulations, fine tune them and build a better model.”

In designing the material, researchers chose silver crystal nanocubes due to the Tao lab’s expertise in their synthesis. Determining the optimal surface chemistry required extensive computational experimentation, which was led by Gaurav Arya, a professor in the Department of Mechanical Engineering and Materials Science at Duke University and co-senior author of the study.

The simulations identified the best molecules to attach to the nanocubes and predicted how the cubes would interact and assemble on the water surface. The simulations were iteratively refined using experimental data obtained by Tao’s lab. Electron microscopy performed by the lab of study co-author Alex Frañó, a professor in the Department of Physics at UC San Diego, confirmed the formation of the desired checkerboard structures.

Tao envisions applications for the nanocube checkerboard in optical sensing. “Such a nanostructure can manipulate light in interesting ways,” she explained. “The spaces between the cubes, particularly near the corner edges where the cubes connect, can act as tiny hotspots that focus or trap light. That could be useful for making new types of optical elements like nanoscale filters or waveguides.”

For more information: Nature Communications

Image: SEM image of the mesophase constructed with edge–edge connected checkerboard lattice obtained with Ag NCs post-synthetically modified with a feedstock mixture of 50 µM PEG20k-SH and 6 µM C16-SH. Scale bar = 500 nm, inset = 100 nm.

Team develops predictive tool for designing complex metal alloys that can withstand extreme environments

Many cooks appreciate the durability, rust resistance, and even heating abilities of stainless steel. However, not everyone knows the secret behind its popularity. Stainless steel contains chromium, which reacts with oxygen in the air to form a thin, protective coating that keeps the steel underneath safe.

Nowadays, scientists and engineers are developing alloys that can withstand extreme conditions for use in nuclear fusion reactors, hypersonic flights, and high-temperature jet engines. They are experimenting with combinations of multiple metals in equal proportions, known as multi-principal element alloys or medium- to high-entropy alloys, to achieve specific design goals such as strength, toughness, and corrosion resistance.

Specifically, researchers seek alloys resistant to corrosion that can happen when metals react with oxygen in the atmosphere, a process called oxidation. These alloys are typically tested in a “cook-and-look” procedure where alloy materials are exposed to high-temperature oxidation environments to see how they respond.

But now, a multidisciplinary research team led by scientists at the Department of Energy’s Pacific Northwest National Laboratory and North Carolina State University combined atomic-scale experiments with theory to create a tool to predict how such high-entropy alloys will behave under high-temperature oxidative environments.

“We are working toward developing an atomic-scale model for material degradation of these complex alloys, which then can be applied to design next-generation alloys with superior resistance to extreme environments for a wide variety of applications such as the aerospace and nuclear power industries,” said Arun Devaraj, co-principal investigator of the study and a PNNL materials scientist specializing in understanding metal degradation in extreme environments.

“The goal here is to find ways to rapidly identify medium- to high-entropy alloys with the desired properties and oxidation resistance for your chosen application.”

For their recent experiments, the research team studied the degradation of a high-entropy alloy with equal amounts of the metals cobalt, chromium, iron, nickel and manganese (CoCrFeNiMn, also called the Cantor alloy). The research team examined oxide formed on the Cantor alloy using a variety of advanced atomic-scale methods to understand how each element arranges itself in the alloy and the oxide.

They discovered that chromium and manganese tend to migrate quickly toward the surface and form stable chromium and manganese oxides. Subsequently, iron and cobalt diffuse through these oxides to form additional layers.

By adding a small amount of aluminum, they discovered that aluminum oxide can act as a barrier for other elements migrating to form the oxide, thereby reducing the overall oxidation of the aluminum-containing Cantor alloy and increasing its resistance to degradation at high temperatures.

“This work sheds light on the mechanisms of oxidation in complex alloys at the atomic scale,” said Bharat Gwalani, co-corresponding author of the study. Gwalani began the study while a scientist at PNNL and continued the research in his current role as an assistant professor of materials science and engineering at North Carolina State University. He added, “by understanding the fundamental mechanisms involved, this work gives us a deeper understanding of oxidation across all complex alloys.”

“Right now there are no universally applicable governing models to extrapolate how a given complex, multi-principal element alloy will oxidize and degrade over time in a high-temperature oxidation environment,” said Devaraj. “This is a substantial step in that direction.”

The team’s careful analysis revealed some universal rules that can predict how the oxidation process will proceed in these complex alloys. Computational colleagues from NCSU developed a model called the Preferential Interactivity Parameter for early prediction of oxidation behavior in complex metal alloys.

Ultimately, the research team expects to expand this research to develop complex alloys with exceptional high-temperature properties, and to do so very quickly by rapid sampling and analysis. The ultimate goal is to choose a combination of elements that favor the formation of an adherent oxide, said Devaraj. “You know oxide formation will happen, but you want to have a very stable oxide that will be protective, that would not change over time, and would withstand extreme heat inside a rocket engine or nuclear reactors.”

A next step will be to introduce automated experimentation and integrate additive manufacturing methods, along with advanced artificial intelligence, to rapidly evaluate promising new alloys. That project is now getting underway at PNNL as a part of the Adaptive Tunability for Synthesis and Control via the Autonomous Learning on Edge (AT SCALE) Initiative.

“That kind of discovery loop for materials discovery will be very relevant for further expanding our knowledge of these novel alloys,” said Devaraj, who also has a joint faculty appointment at the Colorado School of Mines.

For more information: Nature Communications

Image: Researchers have developed a tool to predict how new high-entropy alloys will behave under high-temperature oxidative environments. Development of new alloys is important for the aerospace and nuclear power industries. Credit: Nathan Johnson | Pacific Northwest National Laboratory

Ontario Tech University and Penn State sign MOU on engineering studies, research

Penn State’s College of Engineering and Ontario Tech University’s Faculty of Engineering and Applied Science (FEAS) have officially established a memorandum of understanding (MOU). This agreement aims to harness the combined expertise of both institutions in the fields of engineering and applied sciences.

The MOU was initiated by Akhlesh Lakhtakia, Evan Pugh University Professor and Charles G. Binder Professor of Engineering Science and Mechanics at Penn State, and Moustafa El-Gindy, professor in the FEAS at Ontario Tech University.

“The Ontario Tech Faculty of Engineering and Applied Science is excited about the opportunities to advance research and innovation through this partnership with Penn State,” said Hossam Kishawy, dean of the Faculty of Engineering and Applied Science at Ontario Tech University. “Both institutions value integrity, inclusion and ingenuity, and recognize the vital role of exchanging knowledge and educational experience to drive forward the field of engineering.”

The five-year agreement aims to enhance Ontario Tech and Penn State’s research, innovation and educational excellence in a variety of collaborative endeavors, including:

  • Professional training programs.
  • Faculty and scholar exchanges.
  • Joint research projects and educational programs.
  • Exchange of scientific materials, publications and information.
  • Joint seminars and other academic events.

“Global collaborations position the Penn State College of Engineering for success and contribute to our overall mission as a land-grant institution,” said Tonya Peeples, Harold and Inge Marcus Dean of Engineering in the college. “We look forward to the potential for funding joint research projects and knowledge exchange that this agreement may help enable.”

For more information: Penn State University

AI chips could get a sense of time

Researchers have developed the first memristor with a tunable ‘relaxation time,’ potentially enabling artificial neural networks to process time-dependent data more efficiently. The study was led by the University of Michigan.

Memristors, electrical components that store information in their electrical resistance, could reduce AI’s energy needs by about a factor of 90 compared to today’s graphical processing units. Already, AI is projected to account for about half a percent of the world’s total electricity consumption in 2027, which has the potential to balloon as more companies sell and use AI tools.

“Right now, there’s a lot of interest in AI, but to process bigger and more interesting data, the approach is to increase the network size. That’s not very efficient,” said Wei Lu, the James R. Mellor Professor of Engineering at U-M and co-corresponding author of the study with John Heron, U-M associate professor of materials science and engineering.

The problem is that GPUs operate very differently from the artificial neural networks that run the AI algorithms—the whole network and all its interactions must be sequentially loaded from the external memory, which consumes both time and energy. In contrast, memristors offer energy savings because they mimic key aspects of the way that both artificial and biological neural networks function without external memory. To an extent, the memristor network can embody the artificial neural network.

“We anticipate that our brand-new material system could improve the energy efficiency of AI chips six times over the state-of-the-art material without varying time constants,” said Sieun Chae, a recent U-M Ph.D. graduate in materials science and engineering and co-first-author of the study with Sangmin Yoo, a recent U-M PhD graduate in electrical and computer engineering.

In a biological neural network, timekeeping is achieved through relaxation. Each neuron receives electrical signals and sends them on, but it isn’t a guarantee that a signal will move forward. Some threshold of incoming signals must be reached before the neuron will send its own, and it has to be met in a certain amount of time. If too much time passes, the neuron is said to relax as the electrical energy seeps out of it. Having neurons with different relaxation times in our neural networks helps us understand sequences of events.

Memristors operate a little differently. Rather than the total presence or absence of a signal, what changes is how much of the electrical signal gets through. Exposure to a signal reduces the resistance of the memristor, allowing more of the next signal to pass. In memristors, relaxation means that the resistance rises again over time.

While Lu’s group had explored building relaxation time into memristors in the past, it was not something that could be systematically controlled. But now, Lu and Heron’s team have shown that variations on a base material can provide different relaxation times, enabling memristor networks to mimic this timekeeping mechanism.

The team built the materials on the superconductor YBCO, made of yttrium, barium, carbon and oxygen. It has no electrical resistance at temperatures below -292 Fahrenheit, but they wanted it for its crystal structure. It guided the organization of the magnesium, cobalt, nickel, copper and zinc oxides in the memristor material.

Heron calls this type of oxide, an entropy-stabilized oxide, the “kitchen sink of the atomic world”—the more elements they add, the more stable it becomes. By changing the ratios of these oxides, the team achieved time constants ranging from 159 to 278 nanoseconds, or trillionths of a second. The simple memristor network they built learned to recognize the sounds of the numbers zero to nine. Once trained, it could identify each number before the audio input was complete.

These memristors were made through an energy-intensive process because the team needed perfect crystals to precisely measure their properties, but they anticipate that a simpler process would work for mass manufacturing.

“So far, it’s a vision, but I think there are pathways to making these materials scalable and affordable,” Heron said. “These materials are earth-abundant, nontoxic, cheap and you can almost spray them on.”

For more information: Nature Electronics

Image: The entropy-stabilized oxide is sandwiched between the superconductor YBCO, on which it was grown, and a titanium and platinum electrode. The many colors represent the different components of the entropy-stabilized oxide. By tweaking the ratios of the components, the team could create memristors that relaxed at different rates after exposure to an electrical current, mimicking the way that neurons sense time. Credit: Sieun Chae and Sangmin Yoo, University of Michigan.

Unlocking the cause of pitting corrosion in 3D-printed stainless steel

Scientists from Lawrence Livermore National Laboratory (LLNL), Livermore, Calif., delved into the mysterious world of pitting corrosion in additively manufactured (3D-printed) stainless steel 316L in seawater. Stainless steel 316L is a popular choice for marine applications due to its excellent combination of mechanical strength and corrosion resistance. This holds even more true after 3D printing, but even this resilient material isn’t immune to the scourge of pitting corrosion. The LLNL team used transmission electron microscopy and x-ray photoelectron spectroscopy to do a deep-dive microscopy study to figure out what could potentially be responsible for corrosion.

Continue reading

‘Surprising’ hidden activity of semiconductor material spotted by researchers

New research suggests that materials commonly overlooked in computer chip design actually play an important role in information processing, a discovery which could lead to faster and more efficient electronics.

Using advanced imaging techniques, an international team led by Penn State researchers found that the material that a semiconductor chip device is built on, called the substrate, responds to changes in electricity much like the semiconductor on top of it.

The researchers worked with the semiconductor material, vanadium dioxide, which they said shows great potential as an electronic switch. They also studied how vanadium dioxide interacts with the substrate material titanium dioxide and said they were surprised to discover that there seems to be an active layer in the substrate that behaves similarly to the semiconductor material on top of it when the semiconductor switches between an insulator — not letting electricity flow — and a metal — letting electricity flow. The revelation that substrates can play an active role in semiconductor processes is significant for designing future materials and devices, said study lead Venkatraman Gopalan, professor of materials science and engineering and of physics at Penn State.

The potential of vanadium dioxide as a metal-to-insulator transistor is well-documented and the material is considered promising for semiconductor technology due to its low energy consumption, Gopalan said. However, the material’s properties are still not fully understood, and until now, it has usually been observed in isolation rather than while functioning in a real device.

Vanadium dioxide has strongly correlated electronic effects, meaning the repulsion between electrons interferes with the device, so cannot be ignored as is currently done in silicon-based electronics. This characteristic can result in materials with novel functionalities such as high-temperature superconductivity and enhanced magnetic properties.

The team investigated vanadium dioxide in a device rather than in isolation, applying a voltage to it to make it switch from an insulating to a conducting state. They used the Advanced Photon Source (APS) at Argonne National Laboratory, which uses powerful X-ray beams to study the behavior and structure of materials on the atomic level. When mapping the spatial and temporal response of the material to the switching event, the researchers observed unexpected changes to the structure of the material and substrate.

“What we found was that as the vanadium dioxide film changes to a metal, the whole film channel bulges, which is very surprising,” Gopalan said. “Normally it is supposed to shrink. So clearly something else was going on in the film geometry that was missed before.”

The APS X-ray penetrated through the vanadium dioxide film and into the titanium dioxide (TiO2) substrate — which is normally considered an electrically and mechanically passive material — that the thin film was grown on.

To understand these findings, the theory and simulation effort — led by Long-Qing Chen, Hamer Professor of Materials Science and Engineering, professor of engineering science and mechanics and of mathematics at Penn State — developed a theoretical framework to explain the entire process of the film and the substrate bulging instead of shrinking. When their model incorporated naturally occurring missing oxygen atoms in this material of two types, charged and uncharged, the experimental results could be satisfactorily explained.

Gopalan credited the multidisciplinary team’s combined expertise in material growth, synthesis, structure analysis and synchrotron beamline operation with the new understanding. Using a collaborative approach led by Greg Stone, a physical scientist with the U.S. Army and the lead experimental author, and Yin Chi, postdoctoral scholar at Penn State and the lead theory author, the researchers disentangled the material’s responses and observed them individually using phase field simulations, a simulation that helps scientists understand material changes over time by depicting various states of matter in a virtual setting.

The responses themselves require further investigation, researchers said, but they believe that understanding them will assist in identifying previously unknown capabilities of vanadium dioxide, including potential yet-to-be discovered phenomena in the TiO2 substrate that was considered passive before this study. The study itself unfolded over 10 years, Gopalan noted, including validating the results.

“This is what it takes to go from interesting science to a working device you can hold in the palm of your hand,” Gopalan said. “Experiments and theory are complex and require large-scale collaborative teams working closely together over an extended period of time to solve difficult problems that could have a large impact. We hope and expect that this will accelerate the progress towards a new generation of electronic devices.”

For more information: AdvancedMaterials

Image: Venkatraman Gopalan, professor of materials science and engineering and of physics, in his optical lab

Tiny displacements, giant changes in optical properties

Researchers described a new pathway to obtain novel optical and electronic properties from structural disorder in a recently published study. They found that tiny displacements of just a few picometers – that’s 100,000 times smaller than the thickness of a sheet of paper – in the atomic structure of a crystal could have minimal impacts on optical properties in one direction but produce giant functional enhancements when viewed from another angle.

In this case, the refractive index of the material, or how much light bends or deviates from its original path when it passes through, changed dramatically with atomic disorder.

Such functional enhancements could have practical applications in imaging, remote sensing and even medicine. By controlling the degree of atomic disorder to achieve desired optical properties, the researchers anticipate developing crystals that enable advanced infrared imaging in low light conditions, for example, improving the performance of autonomous vehicles driving at night or medical imaging devices.

“We’ve been working on semiconductor materials for years, gradually moving down the periodic table, looking for materials that behave well but also do interesting or unexpected things,” said Ravichandran, the Philip and Cayley MacDonald Endowed Early Career Chair and associate professor in the Viterbi School of Engineering at USC. “When we started looking at ways to get more tunability – to craft materials ideally suited for specific applications – we found that properties varied dramatically when measured from different directions.”

When materials have different properties or behavior when measured or observed from different directions, that’s known as anisotropy. Anisotropic materials have different characteristics depending on how you look at them, and that can make a huge impact on features including light transmission, mechanical behavior, and other physical or electrical properties critical to the functioning of everyday devices like cameras.

The material the team studied, barium titanium sulfide (BaTiS3), a hexagonal crystal, was already known to have large optical anisotropy, but scientists couldn’t figure out why. It took years of back-and-forth collaboration between teams at WashU, USC and various national labs, but eventually the team cracked the case.

“We were seeing big discrepancies between theory and experiment – shining a light on the material at different angles was making a huge difference in optical properties for reasons that weren’t clear,” said Mishra, associate professor of mechanical engineering & materials science in the McKelvey School of Engineering at WashU. “The key turned out to be structural instabilities that result in certain atoms, in this case the Ti atoms, to displace away from more symmetric positions in a disordered manner. Small anisotropic displacements showed up in high-resolution synchrotron experiments, then we knew to look closer at the atomic structure using an electron microscope.”

“Picometer-scale displacements are so tiny that you’ll only find them if you’re specifically looking for them,” Ravichandran added.

That level of fine detail usually isn’t needed, even for cutting-edge materials science research, because light vibrates so quickly that it smooths over local imperfections in a material. Not this time.

Ren and Zhao had to look at every assumption and every piece of theory to figure out how to explain the mismatch between theory and experiment, Mishra and Ravichandran said, noting that solving this mystery was only possible through collaboration. Using a combination of advanced techniques including single-crystal X-ray diffraction, solid-state nuclear magnetic resonance and scanning transmission electron microscopy, the researchers found evidence of anisotropic atomic displacements of the titanium atoms in BaTiS3. These incredibly tiny, picoscale displacements happen in local clusters within the material, yet they exert a profound influence on global optical properties.

“The key thing is that tiny displacements can have giant effects,” Mishra said. “We’re still exploring how factors like temperature might change this material’s optical properties, but with this study we’ve developed a deep understanding of the relationship between structural disorder and optical response. That will help as we continue discovering new materials and functionalities.”

For more information: Advanced Materials

Bio-inspired materials’ potential for efficient mass transfer boosted by a new twist on a century-old theory

Did you know leaves could be the key to unlocking new energy storage and catalysis improvements? The key lies within their natural vein structure and the century-old biophysical law, Murray’s Law.

An international team of researchers, led by the NanoEngineering Group at the Cambridge Graphene Centre, has developed a new materials theory based on ‘Murray’s Law’, applicable to a wide range of next-generation functional materials, with applications in everything from rechargeable batteries to high-performance gas sensors.

Murray’s Law, put forward by Cecil D. Murray in 1926, describes how natural vascular structures, such as animal blood vessels and veins in plant leaves, efficiently transport fluids with minimum energy expenditure.

“But whereas this traditional theory works for cylindrical pore structures, it often struggles for synthetic networks with diverse shapes — a bit like trying to fit a square peg into a round hole,” says first author Cambridge PhD student Binghan Zhou.

Dubbed ‘Universal Murray’s Law’, the researchers’ new theory bridges the gap between biological vessels and artificial materials and is expected to benefit energy and environmental applications.

“The original Murray’s Law was formulated by minimising the energy consumption to maintain the laminar flow in blood vessels, but it was unsuited for synthetic materials,” says Binghan Zhou.

“To broaden its applicability to synthetic materials, we expanded this Law by considering the flow resistance in hierarchical channels. Our proposed Universal Murray’s Law works for the pores of any shape and suits all common transfer types, including laminar flow, diffusion, and ionic migration.”

Ranging from daily usage to industrial production, many applications involve ion or mass transfer processes through highly porous materials — applications that could benefit from Universal Murray’s Law, say the researchers.

For instance, when charging or discharging batteries, ions physically move between the electrodes through a porous barrier. Gas sensors rely on the diffusion of gas molecules through porous materials. Chemical industries often use catalytic reactions, involving laminar flow of reactants through catalysts.

“Employing this new biophysical law could greatly reduce the flow resistance in the above processes, boosting overall efficiency,” adds Binghan Zhou.

The researchers proved their theory using graphene aerogel, a material known for its extraordinary porosity. They carefully varied the pore sizes and shapes by controlling the growth of ice crystals within the material. Their experiments showed that the microscopic channels following the newly proposed Universal Murray’s Law offer minimum resistance against fluid flow, while deviations from this Law increase the flow resistance.

“We designed a scaled-down hierarchical model for numerical simulation and found that simple shape changes following the proposed Law indeed reduce the flow resistance,” says co-author Dongfang Liang, Professor of Hydrodynamics at the Department of Engineering.

The team also demonstrated the practical value of Universal Murray’s Law by optimising a porous gas sensor. The sensor, designed in accordance with the Law, shows a significantly faster response compared to sensors following a porous hierarchy, traditionally considered to be highly efficient.

“The only difference between the two structures is a slight variation in shape, showing the power and ease of application of our proposed Law,” says Binghan Zhou.

“We have incorporated this special natural Law into synthetic materials,” adds Tawfique Hasan, Professor of Nanoengineering at the Cambridge Graphene Centre, who led the research. “This could be an important step towards theory-guided structural design of functional porous materials. We hope our work will be important for new generation porous materials and contribute to applications for a sustainable future.”

For more information: University of Cambridge

Scientists make the first single-atom-thick sheet of gold

The discovery of graphene created great interest in two-dimensional (2D) materials, but it is tricky to synthesize 2D materials comprised solely of metals. The synthesis of monolayer gold has so far been limited to free-standing several-atoms-thick layers, or monolayers confined on or inside templates.

Gold nanoparticles are of interest due to their application in electronics, catalysis, photonics, sensing and biomedicine.

For the first time, scientists from Linköping University in Sweden have successfully developed gold sheets that are only a single atom layer thick. Dubbed “goldene,” this groundbreaking material exhibits new properties that could transform several technological applications, from environmental catalysis to advanced electronics.

The creation of goldene marks a significant achievement in materials science. Typically, gold atoms naturally tend to clump together, making the formation of such thin layers challenging. Inspired by ancient techniques, the researchers applied a centuries-old Japanese method, refining it to suit modern scientific requirements.

In the process, the scientists have completely revamped some of the properties of gold. For instance, gold is a great electrical conductor, which is used in a lot of electronic hardware. Your phone and computer have gold in it for this exact reason.

But when reduced to a single sheet only one atom thick, gold (or goldene) becomes a semiconductor. Just as graphene exhibits extraordinary properties at a single-layer thickness, so does this 2D material.

“Since the discovery of graphene, 2D materials have gained interest for their extraordinary properties. Diverse 2D materials comprising non-metallic elements or covalently bonded blends have been investigated. However, the synthesis of 2D materials solely comprising metals is challenging,” said the researchers.

“Goldene is one of few elemental 2D materials comprising metals, which are produced via scalable methods. Metals, especially noble metals such as gold due to their plasmonic properties, are used in a wide range of applications such as chemical, biological, pharmaceutical, and electrical applications. Thus, goldene would find unique applications different from those of other 2D materials,” they added.

The journey to goldene began unexpectedly and had many twists and turns. The researchers were working with a special conductive ceramic called titanium silicon carbide in which silicon is embedded in very thin layers. They added some gold to the bulk material at high temperature to make it more conductive. But, to everyone’s surprise, they observed that atomic layers of gold replaced silicon within the ceramic matrix, leading to the formation of titanium gold carbide — a precursor to goldene.

This process was painstaking. It involved tweaking different concentrations of Murakami’s reagent (an alkaline potassium ferricyanide solution) over different periods. Still, even this wasn’t enough. After much trial and error, the researchers found a sweet spot for the reagent’s dilution. But they also found the secret sauce: performing the etching under complete darkness. Light triggers the formation of cyanide ions from the reagent, which attack the gold. Finally, the researchers added surfactants to preserve the resulting golden sheets from curling and coalescence.

Potassium ferricyanide can be toxic, which is why it must be handled with extreme care. However, the researchers note that their method involves diluting this reagent to less than one percent in the solution, minimizing its impact. Moreover, the cyanide ions remain confined in the reagent’s molecules and not released.

Using an electron microscope, the researchers confirmed goldene’s unique structure, characterized by having two free bonds in its two-dimensional form, thus enhancing its chemical reactivity. This makes it ideal as a catalyst for applications in carbon dioxide conversion, hydrogen production, and the creation of value-added chemicals.

Beyond the lab, the implications of goldene are vast. The material’s efficiency in catalytic applications means that less gold is needed for processes that currently depend on larger quantities of the metal. Goldene also exhibits semiconductor properties, unlike its bulk form. So, it opens up new uses for gold in technologies where traditional metals are not feasible.

For more information: Nature Synthesis